About Us

Alex[_12_]

John H wrote:
On Thu, 12 Oct 2017 16:53:30 -0400, wrote:

On Thu, 12 Oct 2017 16:42:10 -0400, wrote:

I was curious so I looked it up. A fully dressed 454 with cast iron
heads weighs 685 lbs from the factory. A Cummins 5.9L diesel by
comparison is 1200 lbs or 515 lbs heavier. Twins would mean a weight
difference of over 1,000 lbs. That's quite a bit, even for a 39' boat.

Major difference is: The 454 develops 450-500 lb-ft of torque at 3200
RPM (depending on year) while the diesel Cummins develops peak torque
of 610 lb-ft at 1600 RPM
The extra torque probably comes from the longer stroke in the diesel.
(4.0" vs 4.75")
They make gasoline engines "square" or even over bore to reduce the
reciprocating forces of a longer stroke for a given displacement
It lets them run at higher RPMs.
===

I believe the extra torque is mostly a result of the higher
compression ratio in a diesel. The higher ratio effectively increases
the duration of the power stroke compared to a gas engine.

---
This email has been checked for viruses by AVG.
http://www.avg.com
Looks like Krause cut'n'pasted something to show his exceptional knowledge of diesel engines.

No doubt.

Thread Tools	Search this Thread
Show Printable Version	Search this Thread: Advanced Search
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Turbo Diesel Outboards	HK	General	9	October 28th 07 07:03 PM
Fuel/Oil slick from exhaust of Turbo Diesel	ldf	General	1	August 22nd 06 06:43 PM
Volvo vs Yanmar diesel		Cruising	20	August 4th 06 05:31 PM
need help with Yanmar YSB12 diesel	SAIL LOCO	ASA	1	September 14th 04 10:20 AM
WTB: Yanmar D36 diesel outboard	Diesell	General	0	March 10th 04 12:20 AM

Menu

About Us