#46
 

I just picked up a new Ruger SR40C for the car. Got the stainless
version so I don't have to oil the hell out of it for that environment.
The trigger is _smoooth_ for a striker-fired gun. It's an affordable .40
cal that I hope to not have to use other than at the range. They make a
9mm version for the same price.

http://ruger.com/products/sr40c/specSheets/3476.html

#46
 

On Thu, 25 Feb 2016 19:35:56 -0500, Alex wrote:

I just picked up a new Ruger SR40C for the car. Got the stainless
version so I don't have to oil the hell out of it for that environment.
The trigger is _smoooth_ for a striker-fired gun. It's an affordable .40
cal that I hope to not have to use other than at the range. They make a
9mm version for the same price.

http://ruger.com/products/sr40c/specSheets/3476.html


I'm wishing I'd waited for this to come out rather than get the Sig P938. This is a
sweet gun:

http://www.kimberamerica.com/micro-9?___SID=U

Comes in a .380 also.
--

Ban liars, tax cheats, idiots, audiophools, and narcissists...not guns!

#46
 

John H. wrote:
On Thu, 25 Feb 2016 19:35:56 -0500, Alex wrote:

I just picked up a new Ruger SR40C for the car. Got the stainless
version so I don't have to oil the hell out of it for that environment.
The trigger is _smoooth_ for a striker-fired gun. It's an affordable .40
cal that I hope to not have to use other than at the range. They make a
9mm version for the same price.

http://ruger.com/products/sr40c/specSheets/3476.html

I'm wishing I'd waited for this to come out rather than get the Sig P938. This is a
sweet gun:

http://www.kimberamerica.com/micro-9?___SID=U

Comes in a .380 also.
--

Ban liars, tax cheats, idiots, audiophools, and narcissists...not guns!


That's a nice looking gun! I have large hands so a short, single-stack
like that might be hard to control for me.

Have you heard if Kimber has returned to their legendary build quality?
I've heard and read that it had suffered a bit but that was maybe four
years ago.

#46
 

On Thu, 25 Feb 2016 20:25:27 -0500, Alex wrote:

John H. wrote:
On Thu, 25 Feb 2016 19:35:56 -0500, Alex wrote:

I just picked up a new Ruger SR40C for the car. Got the stainless
version so I don't have to oil the hell out of it for that environment.
The trigger is _smoooth_ for a striker-fired gun. It's an affordable .40
cal that I hope to not have to use other than at the range. They make a
9mm version for the same price.

http://ruger.com/products/sr40c/specSheets/3476.html

I'm wishing I'd waited for this to come out rather than get the Sig P938. This is a
sweet gun:

http://www.kimberamerica.com/micro-9?___SID=U

Comes in a .380 also.
--

Ban liars, tax cheats, idiots, audiophools, and narcissists...not guns!


That's a nice looking gun! I have large hands so a short, single-stack
like that might be hard to control for me.

Kimber does sell an extended magazine which gives a little better grip. I bought one
for the Sig P938. Big help, and an extra round.

Have you heard if Kimber has returned to their legendary build quality?
I've heard and read that it had suffered a bit but that was maybe four
years ago.

Except from Harry, I've not heard anything bad about Kimbers. This is my Kimber .45:

http://www.kimberamerica.com/tactical-custom-hd-ii-a

I love it. It's the best shooting gun I have...smoothest by far. I like the Sig 226,
but I can't shoot it as well as the Kimber. Then again, the Sig holds twice as many
rounds, so I need to shoot it only half as well...right?
--

Ban liars, tax cheats, idiots, audiophools, and narcissists...not guns!

#46
 

John H. wrote:
On Thu, 25 Feb 2016 20:25:27 -0500, Alex wrote:

John H. wrote:
On Thu, 25 Feb 2016 19:35:56 -0500, Alex wrote:

I just picked up a new Ruger SR40C for the car. Got the stainless
version so I don't have to oil the hell out of it for that environment.
The trigger is _smoooth_ for a striker-fired gun. It's an affordable .40
cal that I hope to not have to use other than at the range. They make a
9mm version for the same price.

http://ruger.com/products/sr40c/specSheets/3476.html

I'm wishing I'd waited for this to come out rather than get the Sig P938. This is a
sweet gun:

http://www.kimberamerica.com/micro-9?___SID=U

Comes in a .380 also.
--

Ban liars, tax cheats, idiots, audiophools, and narcissists...not guns!

That's a nice looking gun! I have large hands so a short, single-stack
like that might be hard to control for me.

Kimber does sell an extended magazine which gives a little better grip. I bought one
for the Sig P938. Big help, and an extra round.

Have you heard if Kimber has returned to their legendary build quality?
I've heard and read that it had suffered a bit but that was maybe four
years ago.
Except from Harry, I've not heard anything bad about Kimbers. This is my Kimber .45:

http://www.kimberamerica.com/tactical-custom-hd-ii-a

I love it. It's the best shooting gun I have...smoothest by far. I like the Sig 226,
but I can't shoot it as well as the Kimber. Then again, the Sig holds twice as many
rounds, so I need to shoot it only half as well...right?
--

Ban liars, tax cheats, idiots, audiophools, and narcissists...not guns!


If you search "Kimber quality" you will see a lot of results. The time
frames vary, as do the opinions, but the consensus seems to be that they
had problems and fixed them. If any problems did exist they could have
been limited to a few designs. Harry's opinion is worthless and usually
unfounded.

#46
 

On Fri, 26 Feb 2016 20:43:31 -0500, Alex wrote:

John H. wrote:
On Thu, 25 Feb 2016 20:25:27 -0500, Alex wrote:

John H. wrote:
On Thu, 25 Feb 2016 19:35:56 -0500, Alex wrote:

I just picked up a new Ruger SR40C for the car. Got the stainless
version so I don't have to oil the hell out of it for that environment.
The trigger is _smoooth_ for a striker-fired gun. It's an affordable .40
cal that I hope to not have to use other than at the range. They make a
9mm version for the same price.

http://ruger.com/products/sr40c/specSheets/3476.html

I'm wishing I'd waited for this to come out rather than get the Sig P938. This is a
sweet gun:

http://www.kimberamerica.com/micro-9?___SID=U

Comes in a .380 also.
--

Ban liars, tax cheats, idiots, audiophools, and narcissists...not guns!

That's a nice looking gun! I have large hands so a short, single-stack
like that might be hard to control for me.

Kimber does sell an extended magazine which gives a little better grip. I bought one
for the Sig P938. Big help, and an extra round.

Have you heard if Kimber has returned to their legendary build quality?
I've heard and read that it had suffered a bit but that was maybe four
years ago.
Except from Harry, I've not heard anything bad about Kimbers. This is my Kimber .45:

http://www.kimberamerica.com/tactical-custom-hd-ii-a

I love it. It's the best shooting gun I have...smoothest by far. I like the Sig 226,
but I can't shoot it as well as the Kimber. Then again, the Sig holds twice as many
rounds, so I need to shoot it only half as well...right?
--

Ban liars, tax cheats, idiots, audiophools, and narcissists...not guns!


If you search "Kimber quality" you will see a lot of results. The time
frames vary, as do the opinions, but the consensus seems to be that they
had problems and fixed them. If any problems did exist they could have
been limited to a few designs. Harry's opinion is worthless and usually
unfounded.

I haven't fired thousands of rounds through mine - maybe 500 or so. But I've not had
any problems at all. Wish I could say the same about the Mosin Nagant. The Russians
must have spent a lot of time practicing how to load that damn thing. Hell, I screw
it up at the range. Those guys had to do it under attack by hordes of Germans!

Gosh, I'd been a believer in Harry's opinion until your comment. After all, he was a
hero of the Vietnam war, no?
--

Ban liars, tax cheats, idiots, audiophools, and narcissists...not guns!

#46
 

On Friday, February 26, 2016 at 7:43:31 PM UTC-6, Alex wrote:
John H. wrote:
On Thu, 25 Feb 2016 20:25:27 -0500, Alex wrote:

John H. wrote:
On Thu, 25 Feb 2016 19:35:56 -0500, Alex wrote:

I just picked up a new Ruger SR40C for the car. Got the stainless
version so I don't have to oil the hell out of it for that environment.
The trigger is _smoooth_ for a striker-fired gun. It's an affordable .40
cal that I hope to not have to use other than at the range. They make a
9mm version for the same price.

http://ruger.com/products/sr40c/specSheets/3476.html

I'm wishing I'd waited for this to come out rather than get the Sig P938. This is a
sweet gun:

http://www.kimberamerica.com/micro-9?___SID=U

Comes in a .380 also.
--

Ban liars, tax cheats, idiots, audiophools, and narcissists...not guns!

That's a nice looking gun! I have large hands so a short, single-stack
like that might be hard to control for me.

Kimber does sell an extended magazine which gives a little better grip. I bought one
for the Sig P938. Big help, and an extra round.

Have you heard if Kimber has returned to their legendary build quality?
I've heard and read that it had suffered a bit but that was maybe four
years ago.
Except from Harry, I've not heard anything bad about Kimbers. This is my Kimber .45:

http://www.kimberamerica.com/tactical-custom-hd-ii-a

I love it. It's the best shooting gun I have...smoothest by far. I like the Sig 226,
but I can't shoot it as well as the Kimber. Then again, the Sig holds twice as many
rounds, so I need to shoot it only half as well...right?
--

Ban liars, tax cheats, idiots, audiophools, and narcissists...not guns!


If you search "Kimber quality" you will see a lot of results. The time
frames vary, as do the opinions, but the consensus seems to be that they
had problems and fixed them. If any problems did exist they could have
been limited to a few designs. Harry's opinion is worthless and usually
unfounded.

Having owned 3 Kimbers I can say I've never had an issue with any of them. I did have one jam, but it was my own fault. It needed cleaned badly. otherwise...

Others I know who own Kimber arms regardless of what model or caliber haven't had an issue with theirs either.

Maybe some people just like to gripe and look at the worst in everything.

#46
 

Tim wrote:
On Friday, February 26, 2016 at 7:43:31 PM UTC-6, Alex wrote:
John H. wrote:
On Thu, 25 Feb 2016 20:25:27 -0500, Alex wrote:

John H. wrote:
On Thu, 25 Feb 2016 19:35:56 -0500, Alex wrote:

I just picked up a new Ruger SR40C for the car. Got the stainless
version so I don't have to oil the hell out of it for that environment.
The trigger is _smoooth_ for a striker-fired gun. It's an affordable .40
cal that I hope to not have to use other than at the range. They make a
9mm version for the same price.

http://ruger.com/products/sr40c/specSheets/3476.html

I'm wishing I'd waited for this to come out rather than get the Sig P938. This is a
sweet gun:

http://www.kimberamerica.com/micro-9?___SID=U

Comes in a .380 also.
--

Ban liars, tax cheats, idiots, audiophools, and narcissists...not guns!

That's a nice looking gun! I have large hands so a short, single-stack
like that might be hard to control for me.

Kimber does sell an extended magazine which gives a little better grip. I bought one
for the Sig P938. Big help, and an extra round.

Have you heard if Kimber has returned to their legendary build quality?
I've heard and read that it had suffered a bit but that was maybe four
years ago.
Except from Harry, I've not heard anything bad about Kimbers. This is my Kimber .45:

http://www.kimberamerica.com/tactical-custom-hd-ii-a

I love it. It's the best shooting gun I have...smoothest by far. I like the Sig 226,
but I can't shoot it as well as the Kimber. Then again, the Sig holds twice as many
rounds, so I need to shoot it only half as well...right?
--

Ban liars, tax cheats, idiots, audiophools, and narcissists...not guns!


If you search "Kimber quality" you will see a lot of results. The time
frames vary, as do the opinions, but the consensus seems to be that they
had problems and fixed them. If any problems did exist they could have
been limited to a few designs. Harry's opinion is worthless and usually
unfounded.

Having owned 3 Kimbers I can say I've never had an issue with any of
them. I did have one jam, but it was my own fault. It needed cleaned badly. otherwise...

Others I know who own Kimber arms regardless of what model or caliber
haven't had an issue with theirs either.

Maybe some people just like to gripe and look at the worst in everything.


Ignorance is bliss

--
Sent from my iPhone 6+

#46
 

On 2/27/16 7:37 AM, John H. wrote:
But I've not had
any problems at all. Wish I could say the same about the Mosin Nagant. The Russians
must have spent a lot of time practicing how to load that damn thing. Hell, I screw
it up at the range. Those guys had to do it under attack by hordes of Germans!


Sell it to Tim for parts and buy a decent rifle that shoots cheap
russian ammo:

http://www.budsgunshop.com/catalog/p...6+Walnut+Stock

#46
 

On Sat, 27 Feb 2016 08:36:55 -0500, Keyser Söze wrote:

On 2/27/16 7:37 AM, John H. wrote:
But I've not had
any problems at all. Wish I could say the same about the Mosin Nagant. The Russians
must have spent a lot of time practicing how to load that damn thing. Hell, I screw
it up at the range. Those guys had to do it under attack by hordes of Germans!


Sell it to Tim for parts and buy a decent rifle that shoots cheap
russian ammo:

http://www.budsgunshop.com/catalog/p...6+Walnut+Stock


To what purpose?

Aren't you the guy that bragged about his Vietnam service but won't tell what unit he
was with?
--

Ban liars, tax cheats, idiots, audiophools, and narcissists...not guns!