Going once, going twice...
 

....my low mileage, almost new Ruger GP 100 revolver, 6" barrel,
stainless steel revolver, with hi-viz front sight and hogue grips,
now at $455 bid. If anyone is interested, please let me know. I'll ship
to your FFL and split the UPS charge. Will toss in 100 rounds of factory
..357 MAG ammo, shipped separately. Shoots .357 mag & .38 special plus.


--
Proud to be a Liberal.

Going once, going twice...
 

wrote:
On Sat, 14 Feb 2015 18:58:03 -0500, Keyser Söze
wrote:

...my low mileage, almost new Ruger GP 100 revolver, 6" barrel,
stainless steel revolver, with hi-viz front sight and hogue grips,
now at $455 bid. If anyone is interested, please let me know. I'll ship
to your FFL and split the UPS charge. Will toss in 100 rounds of factory
.357 MAG ammo, shipped separately. Shoots .357 mag & .38 special plus.

If that falls through I think I was at $151.50 ;-)

Probably too strong a gun for a guy like you. 😃
--
Sent from my iPhone 6+

Going once, going twice...
 

On Sat, 14 Feb 2015 18:58:03 -0500, Keyser Söze wrote:

...my low mileage, almost new Ruger GP 100 revolver, 6" barrel,
stainless steel revolver, with hi-viz front sight and hogue grips,
now at $455 bid. If anyone is interested, please let me know. I'll ship
to your FFL and split the UPS charge. Will toss in 100 rounds of factory
.357 MAG ammo, shipped separately. Shoots .357 mag & .38 special plus.

Sounds like a real nice gun, Harry. If I didn't already have a .357 I might be very
interested.
--

Guns don't cause problems. The behavior
of certain gun owners causes problems.

Going once, going twice...
 

On 15 Feb 2015 01:04:24 GMT, Keyser Söze wrote:

wrote:
On Sat, 14 Feb 2015 18:58:03 -0500, Keyser Söze
wrote:

...my low mileage, almost new Ruger GP 100 revolver, 6" barrel,
stainless steel revolver, with hi-viz front sight and hogue grips,
now at $455 bid. If anyone is interested, please let me know. I'll ship
to your FFL and split the UPS charge. Will toss in 100 rounds of factory
.357 MAG ammo, shipped separately. Shoots .357 mag & .38 special plus.

If that falls through I think I was at $151.50 ;-)

Probably too strong a gun for a guy like you. ?

That was a very nice thing to say, Harry.
--

Guns don't cause problems. The behavior
of certain gun owners causes problems.

Going once, going twice...
 

Keyser Söze wrote:
...my low mileage, almost new Ruger GP 100 revolver, 6" barrel, stainless
steel revolver, with hi-viz front sight and hogue grips,
now at $455 bid. If anyone is interested, please let me know. I'll ship
to your FFL and split the UPS charge. Will toss in 100 rounds of factory
.357 MAG ammo, shipped separately. Shoots .357 mag & .38 special plus.



Maybe you should rent a weapon at the range and see if you like it enough.
Or are you just an arms dealer wannabe?

Going once, going twice...
 

On 2/15/2015 12:11 AM, Califbill wrote:
Keyser Söze wrote:
...my low mileage, almost new Ruger GP 100 revolver, 6" barrel, stainless
steel revolver, with hi-viz front sight and hogue grips,
now at $455 bid. If anyone is interested, please let me know. I'll ship
to your FFL and split the UPS charge. Will toss in 100 rounds of factory
.357 MAG ammo, shipped separately. Shoots .357 mag & .38 special plus.



Maybe you should rent a weapon at the range and see if you like it enough.
Or are you just an arms dealer wannabe?


It was an impulsive buy for Krause. He wanted a 686-6+ in the worst way
but when he checked price and availability he discovered they were
pretty scarce. He settled for 2nd best. Now he regrets his impatience
and impulsiveness. Would you buy anything Krause had control of? He has
some crazy ideas on "how things should be". And we're not just talking guns.

--

Respectfully submitted by Justan

Laugh of the day from Krause

"I'm not to blame anymore for the atmosphere in here.
I've been "born again" as a nice guy."

Going once, going twice...
 

On 2/15/2015 3:07 AM, wrote:
On 15 Feb 2015 01:04:24 GMT, Keyser Söze wrote:

wrote:
On Sat, 14 Feb 2015 18:58:03 -0500, Keyser Söze
wrote:

...my low mileage, almost new Ruger GP 100 revolver, 6" barrel,
stainless steel revolver, with hi-viz front sight and hogue grips,
now at $455 bid. If anyone is interested, please let me know. I'll ship
to your FFL and split the UPS charge. Will toss in 100 rounds of factory
.357 MAG ammo, shipped separately. Shoots .357 mag & .38 special plus.

If that falls through I think I was at $151.50 ;-)

Probably too strong a gun for a guy like you. ?

I have had one for almost 50 years. Never had a problem shooting it,
with stuff a lot hotter than you can buy. I did load up some stuff
that would be great in your LE tho. It was a bit to slow a powder even
for the 6" bbl I was shooting (4227) but in a carbine it would really
step out.
I was pushing a 146gr JHP at around 1625 with a lot of unburned powder
blast.and I bet it would be more like 1800-1900 out of a carbine.
That is getting you up in the 30-30/7.62x39 range when you factor in
the cross sectional density.

Sprechen a little slower. Harry isn't familiar with what you are describing.

--

Respectfully submitted by Justan

Laugh of the day from Krause

"I'm not to blame anymore for the atmosphere in here.
I've been "born again" as a nice guy."

Going once, going twice...
 

On Sun, 15 Feb 2015 05:28:45 -0500, Justan Olphart wrote:

On 2/15/2015 12:11 AM, Califbill wrote:
Keyser Söze wrote:
...my low mileage, almost new Ruger GP 100 revolver, 6" barrel, stainless
steel revolver, with hi-viz front sight and hogue grips,
now at $455 bid. If anyone is interested, please let me know. I'll ship
to your FFL and split the UPS charge. Will toss in 100 rounds of factory
.357 MAG ammo, shipped separately. Shoots .357 mag & .38 special plus.



Maybe you should rent a weapon at the range and see if you like it enough.
Or are you just an arms dealer wannabe?


It was an impulsive buy for Krause. He wanted a 686-6+ in the worst way
but when he checked price and availability he discovered they were
pretty scarce. He settled for 2nd best. Now he regrets his impatience
and impulsiveness. Would you buy anything Krause had control of? He has
some crazy ideas on "how things should be". And we're not just talking guns.

For shame.

It was very nice of Harry to offer this gun to us at a very reasonable price. The
best price I could find is almost $600, and there may be a couple hundred dollars
worth of grips and sights on the gun. I'm wondering what the shipping charge would
be. Damn UPS wanted $85 to ship a gun to Texas for me. I sold it locally.
--

Guns don't cause problems. The behavior
of certain gun owners causes problems.

Going once, going twice...
 

On Sun, 15 Feb 2015 03:07:06 -0500, wrote:

On 15 Feb 2015 01:04:24 GMT, Keyser Söze wrote:

wrote:
On Sat, 14 Feb 2015 18:58:03 -0500, Keyser Söze
wrote:

...my low mileage, almost new Ruger GP 100 revolver, 6" barrel,
stainless steel revolver, with hi-viz front sight and hogue grips,
now at $455 bid. If anyone is interested, please let me know. I'll ship
to your FFL and split the UPS charge. Will toss in 100 rounds of factory
.357 MAG ammo, shipped separately. Shoots .357 mag & .38 special plus.

If that falls through I think I was at $151.50 ;-)

Probably too strong a gun for a guy like you. ?

I have had one for almost 50 years. Never had a problem shooting it,
with stuff a lot hotter than you can buy. I did load up some stuff
that would be great in your LE tho. It was a bit to slow a powder even
for the 6" bbl I was shooting (4227) but in a carbine it would really
step out.
I was pushing a 146gr JHP at around 1625 with a lot of unburned powder
blast.and I bet it would be more like 1800-1900 out of a carbine.
That is getting you up in the 30-30/7.62x39 range when you factor in
the cross sectional density.

Would my S&W Model 28-2 handle that stuff? I've only had mine about 40 years, given
to me by my brother, a cop at the time.
--

Guns don't cause problems. The behavior
of certain gun owners causes problems.

Going once, going twice...
 

On 2/15/15 3:07 AM, wrote:
On 15 Feb 2015 01:04:24 GMT, Keyser Söze wrote:

wrote:
On Sat, 14 Feb 2015 18:58:03 -0500, Keyser Söze
wrote:

...my low mileage, almost new Ruger GP 100 revolver, 6" barrel,
stainless steel revolver, with hi-viz front sight and hogue grips,
now at $455 bid. If anyone is interested, please let me know. I'll ship
to your FFL and split the UPS charge. Will toss in 100 rounds of factory
.357 MAG ammo, shipped separately. Shoots .357 mag & .38 special plus.

If that falls through I think I was at $151.50 ;-)

Probably too strong a gun for a guy like you. ?

I have had one for almost 50 years. Never had a problem shooting it,
with stuff a lot hotter than you can buy. I did load up some stuff
that would be great in your LE tho. It was a bit to slow a powder even
for the 6" bbl I was shooting (4227) but in a carbine it would really
step out.
I was pushing a 146gr JHP at around 1625 with a lot of unburned powder
blast.and I bet it would be more like 1800-1900 out of a carbine.
That is getting you up in the 30-30/7.62x39 range when you factor in
the cross sectional density.


I was kidding of course about your "inability" to shoot the revolver.
These 6" Rugers are soft shooters.

--
Proud to be a Liberal.