....I've seen, and I've seen a lot of them. Good directions, sharp video...


https://www.youtube.com/watch?v=opNM...o&spfreload=10
--
Proud to be a Liberal.

On Wed, 14 Jan 2015 15:26:50 -0500, Keyser Söze wrote:

...I've seen, and I've seen a lot of them. Good directions, sharp video...


https://www.youtube.com/watch?v=opNM...o&spfreload=10

Good. Now find me one for this:

http://tinyurl.com/n7djrxd

And this:

http://tinyurl.com/qb8xb86
--

Guns don't cause problems. The behavior
of certain gun owners causes problems.

On 1/14/15 3:48 PM, Poquito Loco wrote:
On Wed, 14 Jan 2015 15:26:50 -0500, Keyser Söze wrote:

...I've seen, and I've seen a lot of them. Good directions, sharp video...


https://www.youtube.com/watch?v=opNM...o&spfreload=10

Good. Now find me one for this:

http://tinyurl.com/n7djrxd

And this:

http://tinyurl.com/qb8xb86


I've seen cleaning and dissassembly vids on the Mosins...can't be much
to do with that SA revolver to field strip and clean it, though.

It's been an *interesting* experience installing the "upgrade kit" on my
Ruger Mark III. As in, "holy ****, what are all these little bitty
pieces, parts, springs, levers, latches" and so forth. The pistol didn't
need an upgrade kit, actually, but what the hell, it's cold and crappy
outside.

--
Proud to be a Liberal.

On Wed, 14 Jan 2015 17:09:45 -0500, wrote:

On Wed, 14 Jan 2015 15:48:13 -0500, Poquito Loco
wrote:

On Wed, 14 Jan 2015 15:26:50 -0500, Keyser Söze wrote:

...I've seen, and I've seen a lot of them. Good directions, sharp video...


https://www.youtube.com/watch?v=opNM...o&spfreload=10

Good. Now find me one for this:

http://tinyurl.com/n7djrxd

Other that dropping the cylinder out, there is not much to take apart
unless you want to break something ;-)
I suppose you can take the grips and side plate off.


And this:

http://tinyurl.com/qb8xb86

some interesting stuff
http://video-hned.com/Mosin+Nagant/

There's a lot of stuff out there on the MN's. I had a hard time with this one though. I need some
liberal arts guy to help me out.

"M?i chi ti?t liên h? :
https://www.facebook.com/pages/Shop-...32054016812145 CHÚ Ý
QUAN TR?NG : NGOÀI ÐU?NG LINK TRÊN CH"

I'm guessing Vietnamese. Looks like some of the signs over the 'establishments' in Saigon.

My wife an I watched a movie on Netflix the other night, 'Rescue Dawn' (great movie, BTW), during
which I noticed that the 'enemy' fighters were carrying, in some instances, Mosin Nagant 91/30s.
--

Guns don't cause problems. The behavior
of certain gun owners causes problems.

On Wed, 14 Jan 2015 19:09:54 -0500, wrote:

On Wed, 14 Jan 2015 17:46:20 -0500, Poquito Loco
wrote:

On Wed, 14 Jan 2015 17:09:45 -0500, wrote:

On Wed, 14 Jan 2015 15:48:13 -0500, Poquito Loco
wrote:

On Wed, 14 Jan 2015 15:26:50 -0500, Keyser Söze wrote:

...I've seen, and I've seen a lot of them. Good directions, sharp video...


https://www.youtube.com/watch?v=opNM...o&spfreload=10

Good. Now find me one for this:

http://tinyurl.com/n7djrxd

Other that dropping the cylinder out, there is not much to take apart
unless you want to break something ;-)
I suppose you can take the grips and side plate off.


And this:

http://tinyurl.com/qb8xb86

some interesting stuff
http://video-hned.com/Mosin+Nagant/

There's a lot of stuff out there on the MN's. I had a hard time with this one though. I need some
liberal arts guy to help me out.

"M?i chi ti?t liên h? :
https://www.facebook.com/pages/Shop-...32054016812145 CHÚ Ý
QUAN TR?NG : NGOÀI ÐU?NG LINK TRÊN CH"

I'm guessing Vietnamese. Looks like some of the signs over the 'establishments' in Saigon.

My wife an I watched a movie on Netflix the other night, 'Rescue Dawn' (great movie, BTW), during
which I noticed that the 'enemy' fighters were carrying, in some instances, Mosin Nagant 91/30s.


Enemy at the Gates is a good MN movie.

Not on Netflix, dammit.
--

Guns don't cause problems. The behavior
of certain gun owners causes problems.

On Wednesday, January 14, 2015 at 4:10:14 PM UTC-8, wrote:
On Wed, 14 Jan 2015 17:46:20 -0500, Poquito Loco
wrote:

On Wed, 14 Jan 2015 17:09:45 -0500, wrote:

On Wed, 14 Jan 2015 15:48:13 -0500, Poquito Loco
wrote:

On Wed, 14 Jan 2015 15:26:50 -0500, Keyser Söze wrote:

...I've seen, and I've seen a lot of them. Good directions, sharp video...


https://www.youtube.com/watch?v=opNM...o&spfreload=10

Good. Now find me one for this:

http://tinyurl.com/n7djrxd

Other that dropping the cylinder out, there is not much to take apart
unless you want to break something ;-)
I suppose you can take the grips and side plate off.


And this:

http://tinyurl.com/qb8xb86

some interesting stuff
http://video-hned.com/Mosin+Nagant/

There's a lot of stuff out there on the MN's. I had a hard time with this one though. I need some
liberal arts guy to help me out.

"M?i chi ti?t liên h? :
https://www.facebook.com/pages/Shop-...32054016812145 CHÚ Ý
QUAN TR?NG : NGOÀI ÐU?NG LINK TRÊN CH"

I'm guessing Vietnamese. Looks like some of the signs over the 'establishments' in Saigon.

My wife an I watched a movie on Netflix the other night, 'Rescue Dawn' (great movie, BTW), during
which I noticed that the 'enemy' fighters were carrying, in some instances, Mosin Nagant 91/30s.


Enemy at the Gates is a good MN movie.

Pretty good movie. just wish there was more action in it.

Keyser Söze wrote:
On 1/14/15 3:48 PM, Poquito Loco wrote:
On Wed, 14 Jan 2015 15:26:50 -0500, Keyser Söze wrote:

...I've seen, and I've seen a lot of them. Good directions, sharp
video...


https://www.youtube.com/watch?v=opNM...o&spfreload=10

Good. Now find me one for this:

http://tinyurl.com/n7djrxd

And this:

http://tinyurl.com/qb8xb86


I've seen cleaning and dissassembly vids on the Mosins...can't be much
to do with that SA revolver to field strip and clean it, though.

It's been an *interesting* experience installing the "upgrade kit" on
my Ruger Mark III. As in, "holy ****, what are all these little bitty
pieces, parts, springs, levers, latches" and so forth. The pistol
didn't need an upgrade kit, actually, but what the hell, it's cold and
crappy outside.

....and you have no job.

Poquito Loco wrote:
On Wed, 14 Jan 2015 17:09:45 -0500, wrote:

On Wed, 14 Jan 2015 15:48:13 -0500, Poquito Loco
wrote:

On Wed, 14 Jan 2015 15:26:50 -0500, Keyser Söze wrote:

...I've seen, and I've seen a lot of them. Good directions, sharp video...


https://www.youtube.com/watch?v=opNM...o&spfreload=10
Good. Now find me one for this:

http://tinyurl.com/n7djrxd
Other that dropping the cylinder out, there is not much to take apart
unless you want to break something ;-)
I suppose you can take the grips and side plate off.

And this:

http://tinyurl.com/qb8xb86
some interesting stuff
http://video-hned.com/Mosin+Nagant/
There's a lot of stuff out there on the MN's. I had a hard time with this one though. I need some
liberal arts guy to help me out.

"M?i chi ti?t liên h? :
https://www.facebook.com/pages/Shop-...32054016812145 CHÚ Ý
QUAN TR?NG : NGOÀI ÐU?NG LINK TRÊN CH"

I'm guessing Vietnamese. Looks like some of the signs over the 'establishments' in Saigon.

My wife an I watched a movie on Netflix the other night, 'Rescue Dawn' (great movie, BTW), during
which I noticed that the 'enemy' fighters were carrying, in some instances, Mosin Nagant 91/30s.

Check out this site, John...

http://www.imfdb.org/wiki/Main_Page

On Thu, 15 Jan 2015 19:20:33 -0500, Someone Else wrote:

Poquito Loco wrote:
On Wed, 14 Jan 2015 17:09:45 -0500, wrote:

On Wed, 14 Jan 2015 15:48:13 -0500, Poquito Loco
wrote:

On Wed, 14 Jan 2015 15:26:50 -0500, Keyser Söze wrote:

...I've seen, and I've seen a lot of them. Good directions, sharp video...


https://www.youtube.com/watch?v=opNM...o&spfreload=10
Good. Now find me one for this:

http://tinyurl.com/n7djrxd
Other that dropping the cylinder out, there is not much to take apart
unless you want to break something ;-)
I suppose you can take the grips and side plate off.

And this:

http://tinyurl.com/qb8xb86
some interesting stuff
http://video-hned.com/Mosin+Nagant/
There's a lot of stuff out there on the MN's. I had a hard time with this one though. I need some
liberal arts guy to help me out.

"M?i chi ti?t liên h? :
https://www.facebook.com/pages/Shop-...32054016812145 CHÚ Ý
QUAN TR?NG : NGOÀI ÐU?NG LINK TRÊN CH"

I'm guessing Vietnamese. Looks like some of the signs over the 'establishments' in Saigon.

My wife an I watched a movie on Netflix the other night, 'Rescue Dawn' (great movie, BTW), during
which I noticed that the 'enemy' fighters were carrying, in some instances, Mosin Nagant 91/30s.

Check out this site, John...

http://www.imfdb.org/wiki/Main_Page

Mosin Nagant should win a couple Oscars.
--

Guns don't cause problems. The behavior
of certain gun owners causes problems.

On 1/15/15 8:30 PM, Poquito Loco wrote:
On Thu, 15 Jan 2015 19:20:33 -0500, Someone Else wrote:

Poquito Loco wrote:
On Wed, 14 Jan 2015 17:09:45 -0500, wrote:

On Wed, 14 Jan 2015 15:48:13 -0500, Poquito Loco
wrote:

On Wed, 14 Jan 2015 15:26:50 -0500, Keyser Söze wrote:

...I've seen, and I've seen a lot of them. Good directions, sharp video...


https://www.youtube.com/watch?v=opNM...o&spfreload=10
Good. Now find me one for this:

http://tinyurl.com/n7djrxd
Other that dropping the cylinder out, there is not much to take apart
unless you want to break something ;-)
I suppose you can take the grips and side plate off.

And this:

http://tinyurl.com/qb8xb86
some interesting stuff
http://video-hned.com/Mosin+Nagant/
There's a lot of stuff out there on the MN's. I had a hard time with this one though. I need some
liberal arts guy to help me out.

"M?i chi ti?t liên h? :
https://www.facebook.com/pages/Shop-...32054016812145 CHÚ Ý
QUAN TR?NG : NGOÀI ÐU?NG LINK TRÊN CH"

I'm guessing Vietnamese. Looks like some of the signs over the 'establishments' in Saigon.

My wife an I watched a movie on Netflix the other night, 'Rescue Dawn' (great movie, BTW), during
which I noticed that the 'enemy' fighters were carrying, in some instances, Mosin Nagant 91/30s.

Check out this site, John...

http://www.imfdb.org/wiki/Main_Page

Mosin Nagant should win a couple Oscars.

I'm still trying to figure out the "attraction" of those rifles. They're
not pretty. Some of them still shoot well, and I suppose the Russian
ammo is cheap. But they're four feet long, and heavy. Oh, well, there's
a cover for every pot.

--
Proud to be a Liberal.