About Us

Mr. Luddite

On 11/19/2014 9:14 AM, Harrold wrote:
On 11/18/2014 11:58 PM, Mr. Luddite wrote:
On 11/18/2014 10:41 PM, wrote:
On Tue, 18 Nov 2014 21:24:49 -0500, "Mr. Luddite"
wrote:

On 11/18/2014 8:28 PM, wrote:
On Tue, 18 Nov 2014 19:57:53 -0500, F*O*A*D wrote:

Ahh...libertarianism...no regs because tainted food makes you strong.

That is the problem with you Harry. You can't see the difference
between reasonable regulation and oppressive regulation that only a
corporate compliance department can deal with.
You complain about Walmart running the Mom and Pop operations out of
business but you won't admit, over regulation is part of the problem.
The fact remains that a 200,000 square foot Walmart has just about the
same regulatory burden as a 200 square foot fruit stand. Who do you
think can absorb it easier?

I don't believe that.

The elements are still pretty much the same, Walmart just has more of
each item.
If you have a compliance department that knows all the rules, it is
just a process that you have done 100 times. When you are learning by
"citation and fine" it is not as intuitive.
In my wife's club, the municipality changed (same dirt, different
government) and the new life safety officer read the code different
than it had been interpreted for the last 25 years.
In real life, he was right and the previous guys were not keeping up.
There wasn't one single compliant business or club in the city of
Bonita for almost a year. Some just closed.

These codes change every 3 years. (another pet peeve of mine)
Because of bureaucratic inertia, by the time a code cycle is adopted,
a newer version is already out.
The problem with commercial codes is there is very little grand
fathering. The rule changes, you have to comply.
ADA is the worst and sometimes makes the least sense.

I am not an electrician but having some knowledge of electrical issues
it seems to me that some of the NFPA codes are getting a little carried
away. I can certainly understand the purpose of ground fault sensors,
especially on outdoor services but from what my son-in-law tells me
(he's a working, state licensed electrician) arc detection sensors and
other circuit protection are now required as well.

I discovered a while ago that ground fault protectors don't work well
with some inverter/battery chargers that use switching power supplies.
When they turn on the first half cycle fakes the ground fault out
causing it to trip. The first RV we had did this and it took me quite a
while to discover the problem. It worked fine on a circuit with no
ground fault detector but when plugged into a protected circuit it
tripped the ground fault every time.

Does your LOCAL electrical code require you to install outlets upside down?

Depends on how you look at it.

Thread Tools	Search this Thread
Show Printable Version	Search this Thread: Advanced Search
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode

Menu

About Us