LinkBack Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
  #11   Report Post  
posted to rec.boats
external usenet poster
 
First recorded activity by BoatBanter: Jul 2013
Posts: 780
Default Engines and acceleration

On 9/11/2013 1:53 PM, iBoaterer wrote:
In article , says...

On 9/10/2013 5:56 PM, Mr. Luddite wrote:
Since boats have engines and for a change of pace, I thought I'd share
some info I recently received from a car nut. He's talking about a
custom built, 500 cubic inch dragster engine based on the Chrysler 426
c.i. hemi design.

Here's a short list of it's specs and acceleration capabilities:

Produces 8,000 horsepower. That's more than the first 4 rows of cars
at NASCAR's Daytona 500.
Consumes 11.2 gallons of nitro methane per second at full throttle.
Dual magnetos supply 44 amps to each spark plug.
Capable of reaching over 300 MPH +... before you have completed reading
this sentence.
Redlines at 9,500 RPM ...



only does 540 revolutions light to light in the quarter mile.


I want to quibble with the 540 engine revolutions for 1/4 mile.
But, the numbers tell the story.

Average drag tire is 30" tall, for a circumference of 94" or 7'10".
1/4 mile is 1320ft. 1320 ft / 7'10" equals 168.5 wheel rev's down the
track. Assuming a final ratio of 3 to 1 (motor to wheel)
3 times 168.5 = 505 revolutions per 1/4 mile. (does not include wheel
spin. Damn!
Mikek
Fun Fact.
When I was kid my grandmother lived 7 miles from Martin Dragway,
On Saturday nights we could hear the dragsters run the 1/4 mile from her
house 7 miles away.


Yeah, 540 revs is not correct.

Could you back that up? I just showed you my numbers, were do you
think I went wrong?
I didn't think his number was right either, then I did the math.
Mikek

 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is Off
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
FWC vs RWC engines wf3h General 9 August 2nd 09 06:26 PM
Mercruiser 5.7L stalls on acceleration bayplyer General 8 October 8th 05 06:52 PM
Volvo Penta 5.7 GS Power Loss and Loud Noise On Acceleration Mike Cruising 3 November 22nd 04 06:09 PM
What defines acceleration in a boat? The_navigator© ASA 21 December 5th 03 07:20 PM
Engines going out Bertie the Bunyip ASA 29 October 19th 03 06:36 PM


All times are GMT +1. The time now is 07:20 PM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 BoatBanter.com.
The comments are property of their posters.
 

About Us

"It's about Boats"

 

Copyright © 2017