Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #51   Report Post  
posted to rec.boats
external usenet poster
 
First recorded activity by BoatBanter: Nov 2012
Posts: 1,370
Default Target Stand

On 2/9/13 6:35 PM, JustWaitAFrekinMinute wrote:
On 2/9/2013 6:33 PM, ESAD wrote:
On 2/9/13 6:28 PM, JustWaitAFrekinMinute wrote:
On 2/9/2013 4:20 PM, ESAD wrote:




You're about the right height for a target stand. How much would you
charge to stand and hold a target?

Suppose we could just keep your wife on her back and rest it on her
chins...??



That's our boy Snotty...going after family members who don't post here.
What a cowardly little Snotty he is.


Harry, you have had more than one opportunity to prove you are not the
coward, you have dodged each and every time....



Hey, has everyone in your family dyed his/her hair pink in support of
your racing team? What's your pink pony tail look like?


Does everybody sleep their way to paper, and look like a ****ing pig, so
you feel better about yourself?



A. I haven't dodged you. I simply see no purpose in meeting up with you.
What would the purpose be? To see in person that you are a short,
ignorant ****head? I already know that. I am up in Connecticut at least
once and usually twice a year, but we usually are houseguests of friends
who have other houseguests at the same time, and any ill-mannered twerp
who showed up to cause trouble would be dispatched - quickly.

B. I have no idea what you mean by "Does everybody sleep their way to
paper,...et cetera." I'm sorry but the English I read, speak, and write
is "standard American English."
  #57   Report Post  
posted to rec.boats
external usenet poster
 
First recorded activity by BoatBanter: Sep 2011
Posts: 7,588
Default Target Stand

In article ,
says...

On 2/9/2013 3:33 PM, iBoaterer wrote:
In article ,

says...

On 2/9/2013 11:33 AM, iBoaterer wrote:
In article ,

says...

On 2/9/2013 10:06 AM, iBoaterer wrote:
In article ,

says...

On 2/9/2013 9:46 AM, iBoaterer wrote:
In article ,

says...

On 2/8/2013 8:38 PM, Salmonbait wrote:
On Fri, 08 Feb 2013 20:26:36 -0500, JustWaitAFrekinMinute wrote:

On 2/8/2013 8:19 PM, BAR wrote:
In article ,
says...

Anyone have a better idea than this for a target stand to take to the range?

Unassembled:
http://www.theboxotruth.com/images/e24-1.jpg

Assembled:
http://www.theboxotruth.com/images/e24-5.jpg

Looks like a pretty good target stand. You can fill the bottom with
sande or water to keep it in place when there is a bit of wind.


If he fills sections of tube with something solid, or seals the ends of
a couple of the base tubes with sand inside, he can break it down and
carry it in his bag without filling and un-filling the base...

That's the plan. Small bag of mortar mix ought to work well. I'll just fill the bottom 'feet', but
leave them unglued so I can disassemble them easily.


Salmonbait

--
'Name-calling'...the liberals' answer to a lost argument!

You know you live in a Country run by idiots if... You have to have your
parents signature to go on a school field trip but not to get an abortion.


The only issue I see is getting the mortar plugs to not shrink when
setting and fall out.. Might have to put a screw or a dowel through the
side of the pipe before or after setting the mortar??

Um, how about non-shrink grout.......


Just be sure to rough the surface of the pvc so the goo will form a
mechanical bond..

No need, non shrink actually expands somewhat, and has bonding agents to
adhere even to smooth steel.


Thank you mr, engineer... but in the real world....

You stupid little twit!!! In the "real world" non-shrink mortar has
bonding agents to adhere to smooth surfaces. But, I know you are insane
and stupid so you won't listen. Would you like me to show you? If so,
then will you shut up?


Yeah, you are right.. Let's not spend the time to put a screw in there,
because "on paper" it will never fail.. LOL..


WTF would a screw do if it's going to shrink,


Holy crap, you are hopeless...


I'm "hopeless" because you come up with a hairbrained idea? Gee, why did
you erase the rest of my post?
  #58   Report Post  
posted to rec.boats
external usenet poster
 
First recorded activity by BoatBanter: Sep 2011
Posts: 7,588
Default Target Stand

In article ,
says...

On 2/9/13 4:17 PM, JustWaitAFrekinMinute wrote:
On 2/9/2013 3:33 PM, iBoaterer wrote:
In article ,

says...

On 2/9/2013 11:33 AM, iBoaterer wrote:
In article ,

says...

On 2/9/2013 10:06 AM, iBoaterer wrote:
In article ,

says...

On 2/9/2013 9:46 AM, iBoaterer wrote:
In article ,

says...

On 2/8/2013 8:38 PM, Salmonbait wrote:
On Fri, 08 Feb 2013 20:26:36 -0500, JustWaitAFrekinMinute
wrote:

On 2/8/2013 8:19 PM, BAR wrote:
In article ,
says...

Anyone have a better idea than this for a target stand to
take to the range?

Unassembled:
http://www.theboxotruth.com/images/e24-1.jpg

Assembled:
http://www.theboxotruth.com/images/e24-5.jpg

Looks like a pretty good target stand. You can fill the
bottom with
sande or water to keep it in place when there is a bit of wind.


If he fills sections of tube with something solid, or seals
the ends of
a couple of the base tubes with sand inside, he can break it
down and
carry it in his bag without filling and un-filling the base...

That's the plan. Small bag of mortar mix ought to work well.
I'll just fill the bottom 'feet', but
leave them unglued so I can disassemble them easily.


Salmonbait

--
'Name-calling'...the liberals' answer to a lost argument!

You know you live in a Country run by idiots if... You have to
have your
parents signature to go on a school field trip but not to get
an abortion.


The only issue I see is getting the mortar plugs to not shrink
when
setting and fall out.. Might have to put a screw or a dowel
through the
side of the pipe before or after setting the mortar??

Um, how about non-shrink grout.......


Just be sure to rough the surface of the pvc so the goo will form a
mechanical bond..

No need, non shrink actually expands somewhat, and has bonding
agents to
adhere even to smooth steel.


Thank you mr, engineer... but in the real world....

You stupid little twit!!! In the "real world" non-shrink mortar has
bonding agents to adhere to smooth surfaces. But, I know you are insane
and stupid so you won't listen. Would you like me to show you? If so,
then will you shut up?


Yeah, you are right.. Let's not spend the time to put a screw in there,
because "on paper" it will never fail.. LOL..

WTF would a screw do if it's going to shrink,


Holy crap, you are hopeless...



You're about the right height for a target stand. How much would you
charge to stand and hold a target?


That would be employment, and he's too lazy for that.
  #59   Report Post  
posted to rec.boats
external usenet poster
 
First recorded activity by BoatBanter: Sep 2011
Posts: 7,588
Default Target Stand

In article ,
says...

On 2/9/2013 4:20 PM, ESAD wrote:
On 2/9/13 4:17 PM, JustWaitAFrekinMinute wrote:
On 2/9/2013 3:33 PM, iBoaterer wrote:
In article ,

says...

On 2/9/2013 11:33 AM, iBoaterer wrote:
In article ,

says...

On 2/9/2013 10:06 AM, iBoaterer wrote:
In article ,

says...

On 2/9/2013 9:46 AM, iBoaterer wrote:
In article ,

says...

On 2/8/2013 8:38 PM, Salmonbait wrote:
On Fri, 08 Feb 2013 20:26:36 -0500, JustWaitAFrekinMinute
wrote:

On 2/8/2013 8:19 PM, BAR wrote:
In article ,
says...

Anyone have a better idea than this for a target stand to
take to the range?

Unassembled:
http://www.theboxotruth.com/images/e24-1.jpg

Assembled:
http://www.theboxotruth.com/images/e24-5.jpg

Looks like a pretty good target stand. You can fill the
bottom with
sande or water to keep it in place when there is a bit of
wind.


If he fills sections of tube with something solid, or seals
the ends of
a couple of the base tubes with sand inside, he can break it
down and
carry it in his bag without filling and un-filling the base...

That's the plan. Small bag of mortar mix ought to work well.
I'll just fill the bottom 'feet', but
leave them unglued so I can disassemble them easily.


Salmonbait

--
'Name-calling'...the liberals' answer to a lost argument!

You know you live in a Country run by idiots if... You have to
have your
parents signature to go on a school field trip but not to get
an abortion.


The only issue I see is getting the mortar plugs to not shrink
when
setting and fall out.. Might have to put a screw or a dowel
through the
side of the pipe before or after setting the mortar??

Um, how about non-shrink grout.......


Just be sure to rough the surface of the pvc so the goo will form a
mechanical bond..

No need, non shrink actually expands somewhat, and has bonding
agents to
adhere even to smooth steel.


Thank you mr, engineer... but in the real world....

You stupid little twit!!! In the "real world" non-shrink mortar has
bonding agents to adhere to smooth surfaces. But, I know you are
insane
and stupid so you won't listen. Would you like me to show you? If so,
then will you shut up?


Yeah, you are right.. Let's not spend the time to put a screw in there,
because "on paper" it will never fail.. LOL..

WTF would a screw do if it's going to shrink,

Holy crap, you are hopeless...



You're about the right height for a target stand. How much would you
charge to stand and hold a target?


Suppose we could just keep your wife on her back and rest it on her
chins...??


How low can you go, scum?
Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is Off
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Clear food is the target MICHAEL JONES General 0 June 15th 12 05:45 AM
Clear food is the target MICHAEL JONES General 11 June 15th 12 01:01 AM
Target practice from the boat Frogwatch[_2_] General 7 November 16th 08 04:20 AM


All times are GMT +1. The time now is 11:51 PM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 BoatBanter.com.
The comments are property of their posters.
 

About Us

"It's about Boats"

 

Copyright © 2017