Home |
Search |
Today's Posts |
|
#1
![]()
posted to rec.boats
|
|||
|
|||
![]()
On 8/24/2012 3:30 PM, X ` Man wrote:
On 8/24/12 2:47 PM, iBoaterer wrote: In article , dump-on- says... http://tinyurl.com/bvpfh9t I recall saying I would post a photo of our not mu-ku-lar power plant (aka Genny the Generator) one of these days. Here's a photo of it shortly after it was delivered but before it was hooked up. It runs a lot in the house, but not everything at the same time! ![]() Does that fire up automatically when power goes out? If so does the power have to be out for several minutes before it kicks on? Reason I ask is that around here, sometimes a line gets knocked down or some such, and the power goes out for maybe ten seconds while everything resets, so I wonder how the genny handles that. You can set the genny to fire up automatically after a power outage, or you can set it to fire up manually. We also have momentary power glitches from the utility company from time to time. Typically, if they last at least 15 seconds, the transfer switch transfers the supplying of power to the generator and after the power from the utility comes back on, the transfer switch switches power supply back to the utility. As you might suspect, this can get a bit silly if there are a series of glitches from the utility, which sometimes happens. If you want to avoid that, there is an on-off-auto switch on the genny, and a main breaker, and a switch inside the transfer box. If you want, you can set the backup so it only comes on manually. It's a minor pain in the ass to do this. I wrote up a cheat sheet and had it laminated so I would have the steps in proper order. Usually if I am around during the day, everything is on manual. Compared to a larger portable genny on wheels, these are more complex and, unfortunately, a lot more expensive but...they are a lot quieter than the portables, and they burn propane or natural gas rather than gasoline. Those are real advantages. Also, it would take a really large portable unit on wheels to start up our heat pumps. Do you have a "guy" come by to handle all the switcharoo and transfer stuff for you? Seems like it could get complicated. |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|