On 8/12/2012 12:01 PM, iBoaterer wrote:
In article , dump-on-
says...

Here you go, moron...right from HP itself:

http://tinyurl.com/9q6bvz4

"Do not feed a sheet of labels through the printer more than once. The
adhesive backing is designed for one pass through the printer."

You stupid old fool! You do realize that's for a LAZER printer, correct?
Do you not have an ink jet that you claimed was for photos? Also, do you
realize that plain old paper jams also? Do you not want to put paper in
your lazer printer for fear of a jam that involves nothing more than
taking the toner pack out, removing the jam, and going on? Also, if you
read below, the adhesive should be stable to 200 degrees, the
temperature of the fuser, therefore why would the labels come off? You
need to learn to think instead of google.

Amazing. HP stated that If you decide to use label sheets, one of the
characteristics they should have is adhesive stability to 200f.

Are your labels safe to use, fool?

Oh! I would strongly recommend you don't use an inkjet to male labels
unles you are prepared to cover them with clear waterproof tape.

On Aug 12, 1:28*pm, Meyer wrote:
On 8/12/2012 12:01 PM, iBoaterer wrote:







In article , dump-on-
says...

Here you go, moron...right from HP itself:

http://tinyurl.com/9q6bvz4

"Do not feed a sheet of labels through the printer more than once. The
adhesive backing is designed for one pass through the printer."

You stupid old fool! You do realize that's for a LAZER printer, correct?
Do you not have an ink jet that you claimed was for photos? Also, do you
realize that plain old paper jams also? Do you not want to put paper in
your lazer printer for fear of a jam that involves nothing more than
taking the toner pack out, removing the jam, and going on? Also, if you
read below, the adhesive should be stable to 200 degrees, the
temperature of the fuser, therefore why would the labels come off? You
need to learn to think instead of google.

Amazing. HP stated that If you decide to use label sheets, one of the
characteristics they should have is adhesive stability to 200f.

Are your labels safe to use, fool?

Oh! I would strongly recommend you don't use an inkjet to male labels
unles you are prepared to cover them with clear waterproof tape.

Huh....how does one "male labels"?

On 8/12/2012 12:44 PM, North Star wrote:
On Aug 12, 1:28 pm, Meyer wrote:
On 8/12/2012 12:01 PM, iBoaterer wrote:







In article , dump-on-
says...

Here you go, moron...right from HP itself:

http://tinyurl.com/9q6bvz4

"Do not feed a sheet of labels through the printer more than once. The
adhesive backing is designed for one pass through the printer."

You stupid old fool! You do realize that's for a LAZER printer, correct?
Do you not have an ink jet that you claimed was for photos? Also, do you
realize that plain old paper jams also? Do you not want to put paper in
your lazer printer for fear of a jam that involves nothing more than
taking the toner pack out, removing the jam, and going on? Also, if you
read below, the adhesive should be stable to 200 degrees, the
temperature of the fuser, therefore why would the labels come off? You
need to learn to think instead of google.

Amazing. HP stated that If you decide to use label sheets, one of the
characteristics they should have is adhesive stability to 200f.

Are your labels safe to use, fool?

Oh! I would strongly recommend you don't use an inkjet to male labels
unles you are prepared to cover them with clear waterproof tape.

Huh....how does one "male labels"?

On a "lazer"printer. You missed that one dummy.

On 8/12/2012 1:01 PM, Meyer wrote:
On 8/12/2012 12:44 PM, North Star wrote:
On Aug 12, 1:28 pm, Meyer wrote:
On 8/12/2012 12:01 PM, iBoaterer wrote:







In article , dump-on-
says...

Here you go, moron...right from HP itself:

http://tinyurl.com/9q6bvz4

"Do not feed a sheet of labels through the printer more than once. The
adhesive backing is designed for one pass through the printer."

You stupid old fool! You do realize that's for a LAZER printer,
correct?
Do you not have an ink jet that you claimed was for photos? Also, do
you
realize that plain old paper jams also? Do you not want to put paper in
your lazer printer for fear of a jam that involves nothing more than
taking the toner pack out, removing the jam, and going on? Also, if you
read below, the adhesive should be stable to 200 degrees, the
temperature of the fuser, therefore why would the labels come off? You
need to learn to think instead of google.

Amazing. HP stated that If you decide to use label sheets, one of the
characteristics they should have is adhesive stability to 200f.

Are your labels safe to use, fool?

Oh! I would strongly recommend you don't use an inkjet to male labels
unles you are prepared to cover them with clear waterproof tape.

Huh....how does one "male labels"?

On a "lazer"printer. You missed that one dummy.

Was bonnie really so stupid he couldn't figure out what he meant??? What
a dope..

On Aug 12, 7:14*pm, JustWait wrote:
On 8/12/2012 1:01 PM, Meyer wrote:





On 8/12/2012 12:44 PM, North Star wrote:
On Aug 12, 1:28 pm, Meyer wrote:
On 8/12/2012 12:01 PM, iBoaterer wrote:

In article , dump-on-
says...

Here you go, moron...right from HP itself:

http://tinyurl.com/9q6bvz4

"Do not feed a sheet of labels through the printer more than once. The
adhesive backing is designed for one pass through the printer."

You stupid old fool! You do realize that's for a LAZER printer,
correct?
Do you not have an ink jet that you claimed was for photos? Also, do
you
realize that plain old paper jams also? Do you not want to put paper in
your lazer printer for fear of a jam that involves nothing more than
taking the toner pack out, removing the jam, and going on? Also, if you
read below, the adhesive should be stable to 200 degrees, the
temperature of the fuser, therefore why would the labels come off? You
need to learn to think instead of google.

Amazing. HP stated that If you decide to use label sheets, one of the
characteristics they should have is adhesive stability to 200f.

Are your labels safe to use, fool?

Oh! I would strongly recommend you don't use an inkjet to male labels
unles you are prepared to cover them with clear waterproof tape.

Huh....how does one "male labels"?

On a "lazer"printer. You missed that one dummy.

Was bonnie really so stupid he couldn't figure out what he meant??? What
a dope..

How's that new job selling t-shirts going? Don't dispair, at least
you're gainfully employed for the first time in a few years.

On 8/12/12 8:31 PM, North Star wrote:
On Aug 12, 7:14 pm, JustWait wrote:
On 8/12/2012 1:01 PM, Meyer wrote:





On 8/12/2012 12:44 PM, North Star wrote:
On Aug 12, 1:28 pm, Meyer wrote:
On 8/12/2012 12:01 PM, iBoaterer wrote:

In article , dump-on-
says...

Here you go, moron...right from HP itself:

http://tinyurl.com/9q6bvz4

"Do not feed a sheet of labels through the printer more than once. The
adhesive backing is designed for one pass through the printer."

You stupid old fool! You do realize that's for a LAZER printer,
correct?
Do you not have an ink jet that you claimed was for photos? Also, do
you
realize that plain old paper jams also? Do you not want to put paper in
your lazer printer for fear of a jam that involves nothing more than
taking the toner pack out, removing the jam, and going on? Also, if you
read below, the adhesive should be stable to 200 degrees, the
temperature of the fuser, therefore why would the labels come off? You
need to learn to think instead of google.

Amazing. HP stated that If you decide to use label sheets, one of the
characteristics they should have is adhesive stability to 200f.

Are your labels safe to use, fool?

Oh! I would strongly recommend you don't use an inkjet to male labels
unles you are prepared to cover them with clear waterproof tape.

Huh....how does one "male labels"?

On a "lazer"printer. You missed that one dummy.

Was bonnie really so stupid he couldn't figure out what he meant??? What
a dope..

How's that new job selling t-shirts going? Don't dispair, at least
you're gainfully employed for the first time in a few years.


Doubtful.

--
I'm a liberal because the militant fundamentalist ignorant
science-denying religious xenophobic corporate oligarchy of modern
Republican conservatism just doesn't work for me or my country.

On Aug 12, 10:01*pm, X ` Man dump-on-conservati...@anywhere-you-
can.com wrote:
On 8/12/12 8:31 PM, North Star wrote:









On Aug 12, 7:14 pm, JustWait wrote:
On 8/12/2012 1:01 PM, Meyer wrote:

On 8/12/2012 12:44 PM, North Star wrote:
On Aug 12, 1:28 pm, Meyer wrote:
On 8/12/2012 12:01 PM, iBoaterer wrote:

In article , dump-on-
says...

Here you go, moron...right from HP itself:

http://tinyurl.com/9q6bvz4

"Do not feed a sheet of labels through the printer more than once.. The
adhesive backing is designed for one pass through the printer."

You stupid old fool! You do realize that's for a LAZER printer,
correct?
Do you not have an ink jet that you claimed was for photos? Also, do
you
realize that plain old paper jams also? Do you not want to put paper in
your lazer printer for fear of a jam that involves nothing more than
taking the toner pack out, removing the jam, and going on? Also, if you
read below, the adhesive should be stable to 200 degrees, the
temperature of the fuser, therefore why would the labels come off? You
need to learn to think instead of google.

Amazing. HP stated that If you decide to use label sheets, one of the
characteristics they should have is adhesive stability to 200f.

Are your labels safe to use, fool?

Oh! I would strongly recommend you don't use an inkjet to male labels
unles you are prepared to cover them with clear waterproof tape.

Huh....how does one "male labels"?

On a "lazer"printer. You missed that one dummy.

Was bonnie really so stupid he couldn't figure out what he meant??? What
a dope..

How's that new job selling t-shirts going? *Don't dispair, at least
you're gainfully employed for the first time in a few years.

Doubtful.

--
I'm a liberal because the militant fundamentalist ignorant
science-denying religious xenophobic corporate oligarchy of modern
Republican conservatism just doesn't work for me or my country.

Now that you mention it......we only have his word that he is employed
and he's a well known pathological liar.