Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
D. B. Rea
 
Posts: n/a
Default where to install footbraces?

I just bought a used Old Town Egret recreational touring kayak. I also
acquired a set of Yakima footbraces, also used. Anybody have any hints on
where in the boat to install them, or should I just go with the old "that
looks about right" rule?
If there's a website about this situation, I haven't had any luck finding
it. Any help would be appreciated.

TIA-

Dan Rea
when the spambegone you have my email address
  #2   Report Post  
Matt Langenfeld
 
Posts: n/a
Default where to install footbraces?

Mark the furtherst point where you think you'll ever need them, then
give it another inch!

--
Matt Langenfeld
JEM Watercraft
jemwatercraft.com

D. B. Rea wrote:
I just bought a used Old Town Egret recreational touring kayak. I also
acquired a set of Yakima footbraces, also used. Anybody have any hints on
where in the boat to install them, or should I just go with the old "that
looks about right" rule?
If there's a website about this situation, I haven't had any luck finding
it. Any help would be appreciated.

TIA-

Dan Rea
when the spambegone you have my email address



  #3   Report Post  
John Fereira
 
Posts: n/a
Default where to install footbraces?

"D. B. Rea" wrote in
:

I just bought a used Old Town Egret recreational touring kayak. I also
acquired a set of Yakima footbraces, also used. Anybody have any hints
on where in the boat to install them, or should I just go with the old
"that looks about right" rule?


I have built two boats and installed footpegs in both using the "looks about
right method". Since the footbraces are adjustable I set them up such that
when I'm sitting in the kayak they're near the middle of the fore/aft
adjustment. That way, both taller and shorter paddlers could use the kayaks
if I sold them. I also set the foot pegs such that the ball of my foot is
resting on the peg when my foot is in a comfortable position.

Put on some clothes and footware similar to what you'll use when you're
actually paddling, get some duct tape and tape the pegs into place where it
looks right, then sit in the boat to make sure it feels right.

Just to make sure...

When you're sitting in the boat, move your butt up against the back rest,
sit with your upper body erect and slightly forward. Your knees should be
bent and your legs splayed and (if possible with the Egret) your knees just
touching the underside of the deck. Your feet should be bent slightly
forward to touch the pegs.
Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is Off
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Install Yakima railrider tracks on 2001 Honda Odyssey LX ? [email protected] General 1 February 20th 04 08:52 PM
Ad: Sterndrive Engineering Publishes Alpha One Install Guide Sterndrive Engineering General 9 January 22nd 04 05:15 PM
Computer Install on 24' Power Boat Jim Pook Electronics 4 October 28th 03 05:08 AM
Refrigeration Hunter 35.5 install Ron Cruising 5 October 25th 03 10:08 PM


All times are GMT +1. The time now is 08:27 PM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 BoatBanter.com.
The comments are property of their posters.
 

About Us

"It's about Boats"

 

Copyright © 2017