| Home |
| Search |
| Today's Posts |
|
|
|
#1
|
|||
|
|||
|
Hi,
I am in the market shopping for a canoe. I don't know if I should buy a aluminum one or a royalex one. Please help. David Las Vegas |
|
#2
|
|||
|
|||
|
Either's fine
Padeen "David" wrote in message news:lDPeb.5370$La.3168@fed1read02... Hi, I am in the market shopping for a canoe. I don't know if I should buy a aluminum one or a royalex one. Please help. David Las Vegas |
|
#3
|
|||
|
|||
|
David asked:
I am in the market shopping for a canoe. I don't know if I should buy a aluminum one or a royalex one. Aluminum: Advantages: can usually find a used one fairly cheaply Keel makes them track fairly straight Are practically indestructible Disadvantages: Heavy Keel makes them somewhat harder to turn Keel can get hung up on rocks in a shallow river Noisy Aluminum transfers cold from water Did I mention heavy? ABS Advantages: Somewhat lighter Quieter Fairly rugged Maneuvers more easily Surface is easier to kneel on Disadvantages More expensive Doesn't wear as well as aluminum More difficult to keep on a straight line Hull subject to dings from rocks (although MUCH more sturdy than fiberglass) I personally prefer ABS but If I were in the market for an aluminum boat , I would look for a used Grummen (sp). They are fairly common and are pretty bulletproof. HTH Mike |
|
#4
|
|||
|
|||
|
Mtkkburk wrote:
Disadvantages: Heavy Keel makes them somewhat harder to turn Keel can get hung up on rocks in a shallow river Noisy Aluminum transfers cold from water Did I mention heavy? Add also that any portion of the aluminum hull will tend to stick like glue to any rock, regardless of how you come into contact with it. A trip down a bony river can become a series of body-wrenching jerking halts, many of them difficult to free up - except the ones where you have a sudden and unwanted turn with possible safety issues if the current is stronger than your paddling/poling. ABS or Royalex are my preferred materials, mostly for the reasons others here have stated. Did anyone mention aluminum is *very* noisy in any sort of chop? For fishing &/or wildlife viewing, this is a heavy disadvantage. It's been my experience that the assistance in tracking from a keel is far outweighed by the increased difficulty in maneuvering, especially moving water, as well as increased draft in shallower places, especially bony places. (I've owned keels & keelless; I'll never have another keel.) Yours in the north Maine woods, Pete Hilton (Reg. Me. Guide) aka The Ent -- If the assumptions are wrong, the conclusions aren't likely to be very good. R. E. Machol |
|
#5
|
|||
|
|||
|
I don't know if I should buy a
aluminum one or a royalex one. In additon to the good advice preceding this, note: 1. Keels reduce the degree to which a canoe sideslips in a wind. They also keep you from sideslipping on purpose in a current. 2. ABS eventually degrades if exposed too long to UV. Aluminum canoes will thus last longer if you store them in the open sun. |
| Reply |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| FS: Canoe in Baltimore Maryland | Marketplace | |||
| Need books, articles, website to design a canoe (concrete) | Boat Building | |||
| Looking to purchase my first canoe for a lake | General | |||
| Canoe & Kayak Scams Kills 1,000 Americans | General | |||
| Lost canoe Fayette Station | General | |||