Home |
Search |
Today's Posts |
#1
![]() |
|||
|
|||
![]() I had never paddled a kayak when I got the opportunity to try paddling some courtesy of local sporting goods stores who were giving free demonstrations at a local public beach. Over three evenings I paddled 14 dfferent kayaks. They were all what I'd call general puropse kayaks. There were none for white water or long trips. I found it easy to paddle a kayak the first time. You have to wedge yourself in by bracing your feet on peddals and in decked kayaks your knees under the deck. Then its just a matter of swinging the double bladed paddle as if you were swimming. I've done a lot of swimming so it came naturally. I was able to paddle at full power right from the start. All the kayaks save one were fast and efficent for their size. The theory of hull resistance has been pretty well worked out. There are computer programs you can buy which will do the computations and print out the numbers for the hull shape. The one bad kayak I paddled was noisy and left trubultent water in its wake. The others all went through the water cleanly. Some of the longer boats didn't manouver very well. Some had to an extra piece on the back, either a skeg or a rudder, to help them go straight or to turn. These were supposed to be raised an lowered by a thin line but many didn't work well. Some stuck. One had no stopper on the line which dropped in the water and trailed behind. I had to to twist around and fish it out with the paddle. That took a few attempts. On all but one the line was held in a small hook or cleat which was not easy to use. You can't turn fast with the skeg or rudder down. If you want to turn fast you first have to raise the skeg or rudder with the line, then use the paddle and body to turn the boat. That's pretty slow. One of the boats with a rudder must have had sand in the works. It was hard to push the peddals to turn the rudder. I could feel the grit grinding in the works. There must not be a computer program for the best way to build a lightweight but strong and rigid kayak because there was a lot of variation in the longer decked kayaks. The sexier boats with fine entries and flat bottoms were the least rigid. The bottoms flexed up and down. Some boats had a piece of pipe from one end to the other to make them rigid. Another had a brace between the top and bottom which you had to put your legs around. Others had ridges on the inside. The boats with rounder bottoms and rounder decks were more rigid and had less extra bracing. All of the boats were light for their size. The longest was 15 feet. Any I tried to lift I could do so with one hand. There was a lot of variation in comfort and convenience among the kayaks. After a while my preference was for a roomy cockpit in a boat wide enough I could twist around in and look back, or get something out of the rear compartment if the boat had one. One boat was so narrow I tipped it over trying to get in. Another was so wide I couldn't brace my feet and knees on the inside. In one my knees were braced on the side of the kneecaps. That was very uncomfortable. I think getting a kayak is like getting a suit of clothes. Fit is important. One thing I would look for is a seat high enough to support the back. Only two or three of the 14 kayaks had a seat which provided good support above the hips. Some of the kayaks were sit on top models and others were sit inside models. My overall impression was that the sit on top kayaks were the most successful designs for performance and comfort. They were also lower priced because they are simpler to make. They come right out of the mold ready for sale, only requiring sufficient labour cost to screw on handles at the ends. However, the sit on top models offered no protection from wind, waves, or sun. None had waterproof storage. In fact they are so wet I would wear a bathing suit. One had drain holes which let in water. I would avoid paddling in questionable water. They would be fun to use at the beach. My preference would be for a kayak which had a dry place to keep a camera and some food. I like to drive out in the country and spend the day exploring local waters. One evening there was wind and small waves with whitecaps. I had fun bashing through the waves. All of the kayaks I paddled let in spray and became wet. During the three evenings I tried paddling kayaks I never got into a dry one. We all seemed to get water into the kayaks even when there was no wind or waves. Perhaps that was because most of the people trying out the demonstration kayaks were inexperineced novices liek myself. It was like sitting in a shower stall. I'd wear a bathing suit or use a spray skirt. I wonder how hot it would be in a kayak with a spray skirt without any ventilation. So far my personal preference in one of these kayaks would be a long wide one with a rounded bottom, roomy cockpit, high seat, dry storage accessable afloat, and no skeg or rudder. These weeknight demonstrations continue throughout the summer so I hope to try more boats. -- ------------------------------------------------------------------------------ William R Watt National Capital FreeNet Ottawa's free community network homepage: www.ncf.ca/~ag384/top.htm warning: non-freenet email must have "notspam" in subject or it's returned |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
FS: Used Tatoosh kayak from EasyRider, in Seattle | Marketplace | |||
Texas Kayak Builders Bash -- May 22, 2004 | Boat Building | |||
Wrist Pain After Sea Kayak Paddling? | General | |||
FS: Ocean Kayak Cabo with wheel (New Jersey Area) | General | |||
FS: Current Designs Solstice ST Sea Kayak (Toronto, Canada) | General |