Are you familiar with the hull design, Herring? Have you ever seen one
of these Mac26's out of the water? Did you examine the bottom?
Didn't think so.
When you pull up the daggerboard or whatever they call it, what you have
is a narrow, round-chined, pretty much radius bottomed boat that becomes
what some might call "tippy."
Stick to winterizing your outboard's cylinders with WD-40 or whatever
you thought you should use.
I have seen a MAc26 both in and out of the water and have toured one
although I have never sailed one. I'd like to charter one sometime.
I would buy an old one, re-do the rigging with slightly heavier stuff
and then add about 150 lbs of lead into the board.
Not only do I think it is a good design but I think it represents the
future of sailing. Just because tradition says so, there is no reason
why a sailboat has to be heavy and slow. Yes, she is a powerboat with
auxiliary sails but that is the point. A MAc26 would be the perfect
boat to explore the Abacos in the bahamas because with her board up
she draws about 1' and can go into the shallows. Board down with
ballast she can sail and not use expensive fuel.
A Mac 26 is made at least as well as a Hunter and maybe better. The
Mac26 I examined appeared to be made better than a new Catalina 25.
Would I take her offshore? Unmodified on a good day, sure. Modified
with some extra ballast, I'd sail one from Fl to the bahamas.
The average Mac 26 owner probably sails under more conditions and
places than the average conventional heavy weight boat because she is
ttrailerable and truly easy to set up.
You have to remember, Harry is afraid of EVERYTHING!