Tried to install the new lights on my trailer only to find all the
wiring eaten up by corrosion and all the connectors on the trailer
corroded. None of it was tinned wire. This is OEM wiring in an EZ
Loader trailer so beware.
So, Does anybody sell wiring harnesses with marine tinned wire or
should I simply make my own?

On Mar 12, 5:37*pm, Frogwatch wrote:
Tried to install the new lights on my trailer only to find all the
wiring eaten up by corrosion and all the connectors on the trailer
corroded. *None of it was tinned wire. *This is OEM wiring in an EZ
Loader trailer so beware.
So, Does anybody sell wiring harnesses with marine tinned wire or
should I simply make my own?

Turns out Ancor sells 4 wire tinned flat cable for use in wirinng
harnesses.

On 3/12/11 6:00 PM, Frogwatch wrote:
On Mar 12, 5:37 pm, wrote:
Tried to install the new lights on my trailer only to find all the
wiring eaten up by corrosion and all the connectors on the trailer
corroded. None of it was tinned wire. This is OEM wiring in an EZ
Loader trailer so beware.
So, Does anybody sell wiring harnesses with marine tinned wire or
should I simply make my own?

Turns out Ancor sells 4 wire tinned flat cable for use in wirinng
harnesses.


This vendor claims it uses tinned wi

http://marineengineparts.com/shopsit...l/page177.html

In article a8ccf3c0-996e-4601-a0b3-22e55ecef387
@b13g2000prf.googlegroups.com, says...

Tried to install the new lights on my trailer only to find all the
wiring eaten up by corrosion and all the connectors on the trailer
corroded. None of it was tinned wire. This is OEM wiring in an EZ
Loader trailer so beware.
So, Does anybody sell wiring harnesses with marine tinned wire or
should I simply make my own?

I think you will have to make your own. I have never seen a production
one that didn't have that problem.. Like I said before, I just plan on
buying a cheap set every year and replacing them... Usually about $25-
35, the Walmart ones last just as long as West Marine ones.. All the
same ****...

On 3/12/11 6:37 PM, I_am_Tosk wrote:
In articlea8ccf3c0-996e-4601-a0b3-22e55ecef387
@b13g2000prf.googlegroups.com, says...

Tried to install the new lights on my trailer only to find all the
wiring eaten up by corrosion and all the connectors on the trailer
corroded. None of it was tinned wire. This is OEM wiring in an EZ
Loader trailer so beware.
So, Does anybody sell wiring harnesses with marine tinned wire or
should I simply make my own?

I think you will have to make your own. I have never seen a production
one that didn't have that problem.. Like I said before, I just plan on
buying a cheap set every year and replacing them... Usually about $25-
35, the Walmart ones last just as long as West Marine ones.. All the
same ****...


You buy a wiring harness for a trailer for a boat that sits rotting in
your yard, full of leaves and raccoon ****?

Harryk wrote:
On 3/12/11 6:37 PM, I_am_Tosk wrote:
In articlea8ccf3c0-996e-4601-a0b3-22e55ecef387
@b13g2000prf.googlegroups.com, says...

Tried to install the new lights on my trailer only to find all the
wiring eaten up by corrosion and all the connectors on the trailer
corroded. None of it was tinned wire. This is OEM wiring in an EZ
Loader trailer so beware.
So, Does anybody sell wiring harnesses with marine tinned wire or
should I simply make my own?

I think you will have to make your own. I have never seen a production
one that didn't have that problem.. Like I said before, I just plan on
buying a cheap set every year and replacing them... Usually about $25-
35, the Walmart ones last just as long as West Marine ones.. All the
same ****...


You buy a wiring harness for a trailer for a boat that sits rotting in
your yard, full of leaves and raccoon ****?
He has a boat. Why the hell are you here, WAFA?

On Mar 12, 9:36*pm, L G wrote:
Harryk wrote:
On 3/12/11 6:37 PM, I_am_Tosk wrote:
In articlea8ccf3c0-996e-4601-a0b3-22e55ecef387
@b13g2000prf.googlegroups.com, says...

Tried to install the new lights on my trailer only to find all the
wiring eaten up by corrosion and all the connectors on the trailer
corroded. *None of it was tinned wire. *This is OEM wiring in an EZ
Loader trailer so beware.
So, Does anybody sell wiring harnesses with marine tinned wire or
should I simply make my own?

I think you will have to make your own. I have never seen a production
one that didn't have that problem.. Like I said before, I just plan on
buying a cheap set every year and replacing them... Usually about $25-
35, the Walmart ones last just as long as West Marine ones.. All the
same ****...

You buy a wiring harness for a trailer for a boat that sits rotting in
your yard, full of leaves and raccoon ****?

He has a boat. *Why the hell are you here, WAFA?

Looks like its gonna be Ancor tinned trailer wire and the adhesive
lined supposedly salt waterproof heatshrink crimp connectors. The
weak point will continue to be the lights but at least I will know my
connections work.
This should not be rocket science. Why is is it so difficult to make
butt crimp connectors that are inserted in a snap cover filled with
silicon? I do have the type of wire nuts that are waterproof (and
expensive). They contain some gel stuff and am not sure they can be
re-used.

On 3/12/2011 11:35 PM, Frogwatch wrote:
On Mar 12, 9:36 pm, L wrote:
Harryk wrote:
On 3/12/11 6:37 PM, I_am_Tosk wrote:
In articlea8ccf3c0-996e-4601-a0b3-22e55ecef387
@b13g2000prf.googlegroups.com, says...

Tried to install the new lights on my trailer only to find all the
wiring eaten up by corrosion and all the connectors on the trailer
corroded. None of it was tinned wire. This is OEM wiring in an EZ
Loader trailer so beware.
So, Does anybody sell wiring harnesses with marine tinned wire or
should I simply make my own?

I think you will have to make your own. I have never seen a production
one that didn't have that problem.. Like I said before, I just plan on
buying a cheap set every year and replacing them... Usually about $25-
35, the Walmart ones last just as long as West Marine ones.. All the
same ****...

You buy a wiring harness for a trailer for a boat that sits rotting in
your yard, full of leaves and raccoon ****?

He has a boat. Why the hell are you here, WAFA?

Looks like its gonna be Ancor tinned trailer wire and the adhesive
lined supposedly salt waterproof heatshrink crimp connectors. The
weak point will continue to be the lights but at least I will know my
connections work.
This should not be rocket science. Why is is it so difficult to make
butt crimp connectors that are inserted in a snap cover filled with
silicon? I do have the type of wire nuts that are waterproof (and
expensive). They contain some gel stuff and am not sure they can be
re-used.

Smear the bulbs and sockets with dielectric grease. You might be tempted
to use the trailer frame as a ground, but the way various bulbs are
attached to the frame is the Achilles heal of the whole wiring setup.
When you get to a launch ramp, get in the habit of unplugging the
trailer wiring from the car and let the bulbs cool for a few minutes
before launching.

In article , payer3389
@mypacks.net says...

On 3/12/11 6:37 PM, I_am_Tosk wrote:
In articlea8ccf3c0-996e-4601-a0b3-22e55ecef387
@b13g2000prf.googlegroups.com, says...

Tried to install the new lights on my trailer only to find all the
wiring eaten up by corrosion and all the connectors on the trailer
corroded. None of it was tinned wire. This is OEM wiring in an EZ
Loader trailer so beware.
So, Does anybody sell wiring harnesses with marine tinned wire or
should I simply make my own?

I think you will have to make your own. I have never seen a production
one that didn't have that problem.. Like I said before, I just plan on
buying a cheap set every year and replacing them... Usually about $25-
35, the Walmart ones last just as long as West Marine ones.. All the
same ****...


You buy a wiring harness for a trailer for a boat that sits rotting in
your yard, full of leaves and raccoon ****?

At least he has one, Harry.

On Mar 12, 6:37*pm, I_am_Tosk wrote:
In article a8ccf3c0-996e-4601-a0b3-22e55ecef387
@b13g2000prf.googlegroups.com, says...



Tried to install the new lights on my trailer only to find all the
wiring eaten up by corrosion and all the connectors on the trailer
corroded. *None of it was tinned wire. *This is OEM wiring in an EZ
Loader trailer so beware.
So, Does anybody sell wiring harnesses with marine tinned wire or
should I simply make my own?

I think you will have to make your own. I have never seen a production
one that didn't have that problem.. Like I said before, I just plan on
buying a cheap set every year and replacing them... Usually about $25-
35, the Walmart ones last just as long as West Marine ones.. All the
same ****...

Here's another option:

http://www.amazon.com/gp/product/B00...F8&me=&seller=

When i bought my parts boat, the trailer was good but the lights were
rotten. I took one of these,and mounted them portable. i towed the
boat 135 mi at 55mph and the lights held in place . . I took them off
and put them back on the shelf. you might consider this seeing you
can remove them before launching and keep them out of the brine.