TRailer wiring harness
 

In article , payer3389
@mypacks.net says...

On 3/12/11 6:37 PM, I_am_Tosk wrote:
In articlea8ccf3c0-996e-4601-a0b3-22e55ecef387
@b13g2000prf.googlegroups.com, says...

Tried to install the new lights on my trailer only to find all the
wiring eaten up by corrosion and all the connectors on the trailer
corroded. None of it was tinned wire. This is OEM wiring in an EZ
Loader trailer so beware.
So, Does anybody sell wiring harnesses with marine tinned wire or
should I simply make my own?

I think you will have to make your own. I have never seen a production
one that didn't have that problem.. Like I said before, I just plan on
buying a cheap set every year and replacing them... Usually about $25-
35, the Walmart ones last just as long as West Marine ones.. All the
same ****...


You buy a wiring harness for a trailer for a boat that sits rotting in
your yard, full of leaves and raccoon ****?

At least he has one, Harry.

TRailer wiring harness
 

On Sun, 13 Mar 2011 10:25:00 -0400, Wayne.B
wrote:

On Sun, 13 Mar 2011 10:14:28 -0400, Gene
wrote:

So, Does anybody sell wiring harnesses with marine tinned wire or
should I simply make my own?

Just make your own with quality wire and adhesive shrink fit
connectors. Silicone grease is your friend.....

Do you put silicone grease directly on the wire before making the
crimp?

I think he was talking about the wire pull?

TRailer wiring harness
 

On Mar 12, 6:37*pm, I_am_Tosk wrote:
In article a8ccf3c0-996e-4601-a0b3-22e55ecef387
@b13g2000prf.googlegroups.com, says...



Tried to install the new lights on my trailer only to find all the
wiring eaten up by corrosion and all the connectors on the trailer
corroded. *None of it was tinned wire. *This is OEM wiring in an EZ
Loader trailer so beware.
So, Does anybody sell wiring harnesses with marine tinned wire or
should I simply make my own?

I think you will have to make your own. I have never seen a production
one that didn't have that problem.. Like I said before, I just plan on
buying a cheap set every year and replacing them... Usually about $25-
35, the Walmart ones last just as long as West Marine ones.. All the
same ****...

Here's another option:

http://www.amazon.com/gp/product/B00...F8&me=&seller=

When i bought my parts boat, the trailer was good but the lights were
rotten. I took one of these,and mounted them portable. i towed the
boat 135 mi at 55mph and the lights held in place . . I took them off
and put them back on the shelf. you might consider this seeing you
can remove them before launching and keep them out of the brine.

TRailer wiring harness
 

On Sun, 13 Mar 2011 14:31:33 -0400, Gene
wrote:

On Sun, 13 Mar 2011 09:33:23 -0700, jps wrote:

On Sun, 13 Mar 2011 10:25:00 -0400, Wayne.B
wrote:

On Sun, 13 Mar 2011 10:14:28 -0400, Gene
wrote:

So, Does anybody sell wiring harnesses with marine tinned wire or
should I simply make my own?

Just make your own with quality wire and adhesive shrink fit
connectors. Silicone grease is your friend.....

Do you put silicone grease directly on the wire before making the
crimp?

I think he was talking about the wire pull?

Most wire pulls don't involve passing it through conduit.... but if
that is the case, use a proper wire pulling lubricant....

So, what are you using the silicone grease for? Are you talking about
a conductive silicone grease?

TRailer wiring harness
 

On Sun, 13 Mar 2011 14:48:51 -0400, Gene
wrote:

On Sun, 13 Mar 2011 11:35:05 -0700, jps wrote:

On Sun, 13 Mar 2011 14:31:33 -0400, Gene
wrote:

On Sun, 13 Mar 2011 09:33:23 -0700, jps wrote:

On Sun, 13 Mar 2011 10:25:00 -0400, Wayne.B
wrote:

On Sun, 13 Mar 2011 10:14:28 -0400, Gene
wrote:

So, Does anybody sell wiring harnesses with marine tinned wire or
should I simply make my own?

Just make your own with quality wire and adhesive shrink fit
connectors. Silicone grease is your friend.....

Do you put silicone grease directly on the wire before making the
crimp?

I think he was talking about the wire pull?

Most wire pulls don't involve passing it through conduit.... but if
that is the case, use a proper wire pulling lubricant....

So, what are you using the silicone grease for? Are you talking about
a conductive silicone grease?

Silicone grease is, by definition, NOT conductive.... it is a good
thermal conductor and will help keep moisture out of electrical
junctions....

So, you're applying it around the junction as a moisture barrier, not
in it, correct?

TRailer wiring harness
 

On 3/13/2011 10:14 AM, Gene wrote:
On Sat, 12 Mar 2011 14:37:56 -0800 (PST), Frogwatch
wrote:

Tried to install the new lights on my trailer only to find all the
wiring eaten up by corrosion and all the connectors on the trailer
corroded. None of it was tinned wire. This is OEM wiring in an EZ
Loader trailer so beware.
So, Does anybody sell wiring harnesses with marine tinned wire or
should I simply make my own?

Just make your own with quality wire and adhesive shrink fit
connectors. Silicone grease is your friend.....






The Ancor products previously mentioned can be had for a reasonable
price.

TRailer wiring harness
 

On Mon, 14 Mar 2011 01:40:33 -0400, wrote:

On Sun, 13 Mar 2011 13:32:41 -0700, jps wrote:

On Sun, 13 Mar 2011 14:48:51 -0400, Gene
wrote:

On Sun, 13 Mar 2011 11:35:05 -0700, jps wrote:

On Sun, 13 Mar 2011 14:31:33 -0400, Gene
wrote:

On Sun, 13 Mar 2011 09:33:23 -0700, jps wrote:

On Sun, 13 Mar 2011 10:25:00 -0400, Wayne.B
wrote:

On Sun, 13 Mar 2011 10:14:28 -0400, Gene
wrote:

So, Does anybody sell wiring harnesses with marine tinned wire or
should I simply make my own?

Just make your own with quality wire and adhesive shrink fit
connectors. Silicone grease is your friend.....

Do you put silicone grease directly on the wire before making the
crimp?

I think he was talking about the wire pull?

Most wire pulls don't involve passing it through conduit.... but if
that is the case, use a proper wire pulling lubricant....

So, what are you using the silicone grease for? Are you talking about
a conductive silicone grease?

Silicone grease is, by definition, NOT conductive.... it is a good
thermal conductor and will help keep moisture out of electrical
junctions....

So, you're applying it around the junction as a moisture barrier, not
in it, correct?

It is pretty common to have the silicone gel right in the connector
with underground splices. The mechanical pressure will squeeze it out
of the actual joint but leave the rest of the connector flooded with
silicone.

That's cool. With all the weather we get here, I think it's a good
idea for all crimps. I use silicone grease on the seals of my car top
to keep it from squeeking and have used it to reassemble ceramic
faucet parts. Good stuff.

TRailer wiring harness
 

On Mon, 14 Mar 2011 01:40:33 -0400, wrote:

It is pretty common to have the silicone gel right in the connector
with underground splices. The mechanical pressure will squeeze it out
of the actual joint but leave the rest of the connector flooded with
silicone.

It is also useful for prelubricating new water pump impellers, a trick
learned from my diesel mechanic. It helps with insertion and also
prevents dry start wear and tear.

TRailer wiring harness
 

On 3/14/2011 10:23 AM, Wayne.B wrote:
On Mon, 14 Mar 2011 01:40:33 -0400, wrote:

It is pretty common to have the silicone gel right in the connector
with underground splices. The mechanical pressure will squeeze it out
of the actual joint but leave the rest of the connector flooded with
silicone.

It is also useful for prelubricating new water pump impellers, a trick
learned from my diesel mechanic. It helps with insertion and also
prevents dry start wear and tear.


Apply the dielectric grease after making the mechanical connection to
insure getting a good connection.

TRailer wiring harness
 

In article , says...

On 3/14/2011 10:23 AM, Wayne.B wrote:
On Mon, 14 Mar 2011 01:40:33 -0400, wrote:

It is pretty common to have the silicone gel right in the connector
with underground splices. The mechanical pressure will squeeze it out
of the actual joint but leave the rest of the connector flooded with
silicone.

It is also useful for prelubricating new water pump impellers, a trick
learned from my diesel mechanic. It helps with insertion and also
prevents dry start wear and tear.


Apply the dielectric grease after making the mechanical connection to
insure getting a good connection.

Has anybody tried any of that liquid electrical tape? I just noticed a
bottle in my electrical box the other day. It seems it could be a real
mess in tight places, but not as bad as trying to wrap tape in close
areas.