OT- Absolutely amazing radio controlled B-29
 

John H wrote:
On Tue, 18 Jan 2011 05:38:19 -0800 (PST), wrote:


On Jan 18, 6:08 am, wrote:

On Jan 17, 9:21 pm, wrote:




On Jan 17, 8:12 am, wrote:


On Jan 16, 5:47 pm, wrote:


A B29 model powered by 4 chainsaw engines... Complete with a mid-air
launch of an X1 rocket! Here's where a lot of work pays off.


http://users.skynet.be/fa926657/files/B29.wmv


I've seen that thing fly twice, and watched him crash it once. After
the X1 landed, he spun the B29 down from way up high, where he'd been
circling while the X1 did it's thing. Then he flew down the runway
doing slow rolls, and during one of the rolls the outer third of one
of the wings folded up. That was several years ago, and I understand
it's been crashed and rebuilt more than once since.


The original B29 was built by a guy who didn't get a chance to finish
it before he passed away. The family gave it to Mac Hodges, and he
finished it and began flying it at RC events.


BTW... those aren't exactly "chainsaw" motors. They are purpose-built
for RC aircraft use. The current B29 has four DA-100 motors that are
twin cylinder, 100cc and cost $1000 each. Yes, with all the motors,
radio gear, and airframe it's probably $6000 - 7000 in the air. Just
the props can be over $100 each.


Here's the motor used: http://www.desertaircraft.com/engine...hp?Page=DA-100


I passed on the info as I recieved it.


Thanks for the correction.

It was not meant in any mean-spirited way.


Deffinately understood.

How would you know unless

you were into R/C? Besides, many R/C planes acrually *do* use
converted chainsaw motors... they just aren't as light and powerful as
something like the DA motor, but are a whole lot cheaper! And gas&oil
mix is far less expensive than the glow fuel that the traditional R/C
motors use.


no I haven't been into the model air plane stuff since I was a kid.
Some where around either my brothers place or here, we've got a box of
04 cox and wen-mac engines left over for destroyed string fliers.

we never could afford to get into RC

I've thought about it, as I used to do a lot of u-control modelling. But a
friend who is into it has had a rough time finding a place to fly around here.
He's got to drive a long ways to find a place that allows RC flying. It used to
be that almost all the military bases had an RC club. Don't know what happened
to them. Nowadays, if it doesn't have a touch screen and show videos, the kids
aren't much interested.

I've got some n-gauge railroad stuff. Trying to get the grandkids interested.
Nope.

I was also into model rockets as a kid. We also used those rocket
motors for lego cars and boats. They weren't usually successful!

OT- Absolutely amazing radio controlled B-29
 

On Jan 18, 7:00*pm, L G wrote:
Jack. wrote:
On Jan 17, 9:21 pm, *wrote:

On Jan 17, 8:12 am, *wrote:

On Jan 16, 5:47 pm, *wrote:

A B29 model powered by 4 chainsaw engines... Complete with a mid-air
launch of an X1 rocket! * Here's where a lot of work pays off.

http://users.skynet.be/fa926657/files/B29.wmv

I've seen that thing fly twice, and watched him crash it once. *After
the X1 landed, he spun the B29 down from way up high, where he'd been
circling while the X1 did it's thing. *Then he flew down the runway
doing slow rolls, and during one of the rolls the outer third of one
of the wings folded up. *That was several years ago, and I understand
it's been crashed and rebuilt more than once since.

The original B29 was built by a guy who didn't get a chance to finish
it before he passed away. *The family gave it to Mac Hodges, and he
finished it and began flying it at RC events.

BTW... those aren't exactly "chainsaw" motors. *They are purpose-built
for RC aircraft use. *The current B29 has four DA-100 motors that are
twin cylinder, 100cc and cost $1000 each. *Yes, with all the motors,
radio gear, and airframe it's probably $6000 - 7000 in the air. *Just
the props can be over $100 each.

Here's the motor used: *http://www.desertaircraft.com/engine...hp?Page=DA-100

I passed on the info as I recieved it.

Thanks for the correction.

It was not meant in any mean-spirited way. *How would you know unless
you were into R/C? *Besides, many R/C planes acrually *do* use
converted chainsaw motors... they just aren't as light and powerful as
something like the DA motor, but are a whole lot cheaper! *And gas&oil
mix is far less expensive than the glow fuel that the traditional R/C
motors use.

I made a boat powered with a weed eater motor when I was a kid. *It was
a lot of fun!

Theres' several vids on u-tube that show 'em. That is kinda cool. I'd
thought of it also, but eh, too many other projects.

OT- Absolutely amazing radio controlled B-29
 

On Jan 18, 9:58*pm, Tim wrote:
On Jan 18, 7:00*pm, L G wrote:





Jack. wrote:
On Jan 17, 9:21 pm, *wrote:

On Jan 17, 8:12 am, *wrote:

On Jan 16, 5:47 pm, *wrote:

A B29 model powered by 4 chainsaw engines... Complete with a mid-air
launch of an X1 rocket! * Here's where a lot of work pays off.

http://users.skynet.be/fa926657/files/B29.wmv

I've seen that thing fly twice, and watched him crash it once. *After
the X1 landed, he spun the B29 down from way up high, where he'd been
circling while the X1 did it's thing. *Then he flew down the runway
doing slow rolls, and during one of the rolls the outer third of one
of the wings folded up. *That was several years ago, and I understand
it's been crashed and rebuilt more than once since.

The original B29 was built by a guy who didn't get a chance to finish
it before he passed away. *The family gave it to Mac Hodges, and he
finished it and began flying it at RC events.

BTW... those aren't exactly "chainsaw" motors. *They are purpose-built
for RC aircraft use. *The current B29 has four DA-100 motors that are
twin cylinder, 100cc and cost $1000 each. *Yes, with all the motors,
radio gear, and airframe it's probably $6000 - 7000 in the air. *Just
the props can be over $100 each.

Here's the motor used: *http://www.desertaircraft.com/engine...hp?Page=DA-100

I passed on the info as I recieved it.

Thanks for the correction.

It was not meant in any mean-spirited way. *How would you know unless
you were into R/C? *Besides, many R/C planes acrually *do* use
converted chainsaw motors... they just aren't as light and powerful as
something like the DA motor, but are a whole lot cheaper! *And gas&oil
mix is far less expensive than the glow fuel that the traditional R/C
motors use.

I made a boat powered with a weed eater motor when I was a kid. *It was
a lot of fun!

Theres' several vids on u-tube that show 'em. *That is kinda cool. I'd
thought of it also, but eh, too many other projects.

I saw some R/C boats at Perry, GA at a R/C swap meet and show they
have there every year. There are groups that race them, and some of
them will do 70+ mph. There was a guy that was selling one a few
years back that was a twin-engine model, and it had been clocked over
100mph.

I looked into it thinking it woiuld be fun when we're out on the
lake. Up in a quiet cove, fire up and toss out an R/C boat and let
'er rip! They do make smaller electric powered ones that would be OK
and the costs are reasonable, but one of those gas powered fast ones
can approach $1000 real quick.

OT- Absolutely amazing radio controlled B-29
 

On 1/19/11 6:38 AM, Jack. wrote:
On Jan 18, 9:58 pm, wrote:
On Jan 18, 7:00 pm, L wrote:





Jack. wrote:
On Jan 17, 9:21 pm, wrote:

On Jan 17, 8:12 am, wrote:

On Jan 16, 5:47 pm, wrote:

A B29 model powered by 4 chainsaw engines... Complete with a mid-air
launch of an X1 rocket! Here's where a lot of work pays off.

http://users.skynet.be/fa926657/files/B29.wmv

I've seen that thing fly twice, and watched him crash it once. After
the X1 landed, he spun the B29 down from way up high, where he'd been
circling while the X1 did it's thing. Then he flew down the runway
doing slow rolls, and during one of the rolls the outer third of one
of the wings folded up. That was several years ago, and I understand
it's been crashed and rebuilt more than once since.

The original B29 was built by a guy who didn't get a chance to finish
it before he passed away. The family gave it to Mac Hodges, and he
finished it and began flying it at RC events.

BTW... those aren't exactly "chainsaw" motors. They are purpose-built
for RC aircraft use. The current B29 has four DA-100 motors that are
twin cylinder, 100cc and cost $1000 each. Yes, with all the motors,
radio gear, and airframe it's probably $6000 - 7000 in the air. Just
the props can be over $100 each.

Here's the motor used: http://www.desertaircraft.com/engine...hp?Page=DA-100

I passed on the info as I recieved it.

Thanks for the correction.

It was not meant in any mean-spirited way. How would you know unless
you were into R/C? Besides, many R/C planes acrually *do* use
converted chainsaw motors... they just aren't as light and powerful as
something like the DA motor, but are a whole lot cheaper! And gas&oil
mix is far less expensive than the glow fuel that the traditional R/C
motors use.

I made a boat powered with a weed eater motor when I was a kid. It was
a lot of fun!

Theres' several vids on u-tube that show 'em. That is kinda cool. I'd
thought of it also, but eh, too many other projects.

I saw some R/C boats at Perry, GA at a R/C swap meet and show they
have there every year. There are groups that race them, and some of
them will do 70+ mph. There was a guy that was selling one a few
years back that was a twin-engine model, and it had been clocked over
100mph.

I looked into it thinking it woiuld be fun when we're out on the
lake. Up in a quiet cove, fire up and toss out an R/C boat and let
'er rip! They do make smaller electric powered ones that would be OK
and the costs are reasonable, but one of those gas powered fast ones
can approach $1000 real quick.


Thus fulfilling the prime rule of boating...POAT...peel off another
thousand.

OT- Absolutely amazing radio controlled B-29
 

On Jan 18, 6:24*pm, Tim wrote:
On Jan 18, 11:31*am, Spoofer wrote:





In article 14c0f104-3d19-4390-a395-452dc49299b4
@e4g2000vbg.googlegroups.com, says...

On Jan 18, 8:43*am, Harryk wrote:
On 1/18/11 8:38 AM, Tim wrote:

On Jan 18, 6:08 am, *wrote:
On Jan 17, 9:21 pm, *wrote:

On Jan 17, 8:12 am, *wrote:

On Jan 16, 5:47 pm, *wrote:

A B29 model powered by 4 chainsaw engines... Complete with a mid-air
launch of an X1 rocket! * Here's where a lot of work pays off.

http://users.skynet.be/fa926657/files/B29.wmv

I've seen that thing fly twice, and watched him crash it once. *After
the X1 landed, he spun the B29 down from way up high, where he'd been
circling while the X1 did it's thing. *Then he flew down the runway
doing slow rolls, and during one of the rolls the outer third of one
of the wings folded up. *That was several years ago, and I understand
it's been crashed and rebuilt more than once since.

The original B29 was built by a guy who didn't get a chance to finish
it before he passed away. *The family gave it to Mac Hodges, and he
finished it and began flying it at RC events.

BTW... those aren't exactly "chainsaw" motors. *They are purpose-built
for RC aircraft use. *The current B29 has four DA-100 motors that are
twin cylinder, 100cc and cost $1000 each. *Yes, with all the motors,
radio gear, and airframe it's probably $6000 - 7000 in the air.. *Just
the props can be over $100 each.

Here's the motor used: *http://www.desertaircraft.com/engine...hp?Page=DA-100

I passed on the info as I recieved it.

Thanks for the correction.

It was not meant in any mean-spirited way.

Deffinately understood.

How would you know unless
you were into R/C? *Besides, many R/C planes acrually *do* use
converted chainsaw motors... they just aren't as light and powerful as
something like the DA motor, but are a whole lot cheaper! *And gas&oil
mix is far less expensive than the glow fuel that the traditional R/C
motors use.

no I haven't been into the model air plane stuff since I was a kid.
Some where around either my brothers place or here, we've got a box of
04 cox and wen-mac engines left over for destroyed string fliers.

Don't through away those old motors. *Some are collectable, although
they aren't really worth much.

we never could afford to get into RC

The radio gear was expensive and finicky back then, but is amazingly
cheap and bulletproof now. *I was in the same boat as a kid.

The one time I got my U-Control balsa and tissue model airplane in the
air I got so dizzy I puked. This was when I was 12 or 13. Were there RC
flying models in those days? I don't remember them.

I flew a lot of U/C back in the day. *I started with the little string
line 0.049 Cox motor planes, and graduated up to stainless steel lines
on 50" wingspan stunters with Fox and McCoy motors at just under 0.50
(yes, 1/2 cubic inch) motors. *I still have a couple and fly them
occasionally. *The R/C guys just watch and shake their heads. *:-

There was R/C back in the timeframe I beleive you're talking about,
but it was experimental and rare. *Guys had to build their own
transmitter and receiver equipment in the beginning, and the control
was crude. *It took the transistor becoming common and cheap in the
'60s to have multi-channel, proportional control equipment, and it was
very expensive.

Now you can buy a nice 6 channel R/C transmitter and receiver with 4
control servos, rechargeable TX and RX batteries, and a charger for
around $200.

There were actually crude R/C planes in WW2. They used them for target
practice in the Navy for one.

Yes, My dad (Army) shot at a few with .50 cal. *He said they were
really hard to hit. *He described it as a monoplane that took off from
a skid (no landing gear) that was equiped with a single 2-cycle, twin
opposing cylinder rnotor, yet it had two counter-rotating props.

he also said that when it hit the ground it would come apart easily so
it wouldn't sustain a lot of damage on impact and could be re-
assembled fairly well on the spot and put back into practice.

now if by chance you shot it up and it crashed, there were also spare
parts to re-assemble it w/little effort.

I looked around for pics of one, but you either had planes with the
single prop, or you got pictures of the engine with dual fans.

I read an article some years ago about some R/C guys that had done a
proof of concept for the military of a R/C reconnaissance plane. It
have video and other sensors, could take off and land on a short
runway, and worked great. Oh, and it was about $2000 a copy.

The military took the idea and handed it over to one of the big
military contractors. What they got back was a very expensive plane
that had to be launched from a catapult, retrieved by flying it into a
net, it broke something on every retreival, and was ultimately a flop.

Sometimes the KISS principle is best.

OT- Absolutely amazing radio controlled B-29
 

On 1/19/11 10:06 AM, I am Tosk wrote:
In article11995c49-2fb8-42dc-adcb-5612d0548db6@
32g2000yqz.googlegroups.com, says...

On Jan 18, 9:58 pm, wrote:
On Jan 18, 7:00 pm, L wrote:





Jack. wrote:
On Jan 17, 9:21 pm, wrote:

On Jan 17, 8:12 am, wrote:

On Jan 16, 5:47 pm, wrote:

A B29 model powered by 4 chainsaw engines... Complete with a mid-air
launch of an X1 rocket! Here's where a lot of work pays off.

http://users.skynet.be/fa926657/files/B29.wmv

I've seen that thing fly twice, and watched him crash it once. After
the X1 landed, he spun the B29 down from way up high, where he'd been
circling while the X1 did it's thing. Then he flew down the runway
doing slow rolls, and during one of the rolls the outer third of one
of the wings folded up. That was several years ago, and I understand
it's been crashed and rebuilt more than once since.

The original B29 was built by a guy who didn't get a chance to finish
it before he passed away. The family gave it to Mac Hodges, and he
finished it and began flying it at RC events.

BTW... those aren't exactly "chainsaw" motors. They are purpose-built
for RC aircraft use. The current B29 has four DA-100 motors that are
twin cylinder, 100cc and cost $1000 each. Yes, with all the motors,
radio gear, and airframe it's probably $6000 - 7000 in the air. Just
the props can be over $100 each.

Here's the motor used: http://www.desertaircraft.com/engine...hp?Page=DA-100

I passed on the info as I recieved it.

Thanks for the correction.

It was not meant in any mean-spirited way. How would you know unless
you were into R/C? Besides, many R/C planes acrually *do* use
converted chainsaw motors... they just aren't as light and powerful as
something like the DA motor, but are a whole lot cheaper! And gas&oil
mix is far less expensive than the glow fuel that the traditional R/C
motors use.

I made a boat powered with a weed eater motor when I was a kid. It was
a lot of fun!

Theres' several vids on u-tube that show 'em. That is kinda cool. I'd
thought of it also, but eh, too many other projects.

I saw some R/C boats at Perry, GA at a R/C swap meet and show they
have there every year. There are groups that race them, and some of
them will do 70+ mph. There was a guy that was selling one a few
years back that was a twin-engine model, and it had been clocked over
100mph.

I looked into it thinking it woiuld be fun when we're out on the
lake. Up in a quiet cove, fire up and toss out an R/C boat and let
'er rip! They do make smaller electric powered ones that would be OK
and the costs are reasonable, but one of those gas powered fast ones
can approach $1000 real quick.

There was one on a small lake down the shore a few years ago. Although
it was legal, the noise was terrible. The locals literally drove the guy
off by threatening to do **** to his car and stuff...


If they did that, would they be tossed on the stairs at the local police
station?

OT- Absolutely amazing radio controlled B-29
 

"Harryk" wrote in message
...
On 1/19/11 10:06 AM, I am Tosk wrote:
In article11995c49-2fb8-42dc-adcb-5612d0548db6@
32g2000yqz.googlegroups.com, says...

On Jan 18, 9:58 pm, wrote:
On Jan 18, 7:00 pm, L wrote:





Jack. wrote:
On Jan 17, 9:21 pm, wrote:

On Jan 17, 8:12 am, wrote:

On Jan 16, 5:47 pm, wrote:

A B29 model powered by 4 chainsaw engines... Complete with a
mid-air
launch of an X1 rocket! Here's where a lot of work pays off.

http://users.skynet.be/fa926657/files/B29.wmv

I've seen that thing fly twice, and watched him crash it once.
After
the X1 landed, he spun the B29 down from way up high, where he'd
been
circling while the X1 did it's thing. Then he flew down the runway
doing slow rolls, and during one of the rolls the outer third of
one
of the wings folded up. That was several years ago, and I
understand
it's been crashed and rebuilt more than once since.

The original B29 was built by a guy who didn't get a chance to
finish
it before he passed away. The family gave it to Mac Hodges, and he
finished it and began flying it at RC events.

BTW... those aren't exactly "chainsaw" motors. They are
purpose-built
for RC aircraft use. The current B29 has four DA-100 motors that
are
twin cylinder, 100cc and cost $1000 each. Yes, with all the
motors,
radio gear, and airframe it's probably $6000 - 7000 in the air.
Just
the props can be over $100 each.

Here's the motor used:
http://www.desertaircraft.com/engine...hp?Page=DA-100

I passed on the info as I recieved it.

Thanks for the correction.

It was not meant in any mean-spirited way. How would you know unless
you were into R/C? Besides, many R/C planes acrually *do* use
converted chainsaw motors... they just aren't as light and powerful
as
something like the DA motor, but are a whole lot cheaper! And
gas&oil
mix is far less expensive than the glow fuel that the traditional R/C
motors use.

I made a boat powered with a weed eater motor when I was a kid. It
was
a lot of fun!

Theres' several vids on u-tube that show 'em. That is kinda cool. I'd
thought of it also, but eh, too many other projects.

I saw some R/C boats at Perry, GA at a R/C swap meet and show they
have there every year. There are groups that race them, and some of
them will do 70+ mph. There was a guy that was selling one a few
years back that was a twin-engine model, and it had been clocked over
100mph.

I looked into it thinking it woiuld be fun when we're out on the
lake. Up in a quiet cove, fire up and toss out an R/C boat and let
'er rip! They do make smaller electric powered ones that would be OK
and the costs are reasonable, but one of those gas powered fast ones
can approach $1000 real quick.

There was one on a small lake down the shore a few years ago. Although
it was legal, the noise was terrible. The locals literally drove the guy
off by threatening to do **** to his car and stuff...


If they did that, would they be tossed on the stairs at the local police
station?

I think you'd have to get real stupid and challenge the cops before that
would happen.
Most people smarten up once in custody.

OT- Absolutely amazing radio controlled B-29
 

In article ,
says...

"Harryk" wrote in message
...
On 1/19/11 10:06 AM, I am Tosk wrote:
In article11995c49-2fb8-42dc-adcb-5612d0548db6@
32g2000yqz.googlegroups.com, says...

On Jan 18, 9:58 pm, wrote:
On Jan 18, 7:00 pm, L wrote:





Jack. wrote:
On Jan 17, 9:21 pm, wrote:

On Jan 17, 8:12 am, wrote:

On Jan 16, 5:47 pm, wrote:

A B29 model powered by 4 chainsaw engines... Complete with a
mid-air
launch of an X1 rocket! Here's where a lot of work pays off.

http://users.skynet.be/fa926657/files/B29.wmv

I've seen that thing fly twice, and watched him crash it once.
After
the X1 landed, he spun the B29 down from way up high, where he'd
been
circling while the X1 did it's thing. Then he flew down the runway
doing slow rolls, and during one of the rolls the outer third of
one
of the wings folded up. That was several years ago, and I
understand
it's been crashed and rebuilt more than once since.

The original B29 was built by a guy who didn't get a chance to
finish
it before he passed away. The family gave it to Mac Hodges, and he
finished it and began flying it at RC events.

BTW... those aren't exactly "chainsaw" motors. They are
purpose-built
for RC aircraft use. The current B29 has four DA-100 motors that
are
twin cylinder, 100cc and cost $1000 each. Yes, with all the
motors,
radio gear, and airframe it's probably $6000 - 7000 in the air.
Just
the props can be over $100 each.

Here's the motor used:
http://www.desertaircraft.com/engine...hp?Page=DA-100

I passed on the info as I recieved it.

Thanks for the correction.

It was not meant in any mean-spirited way. How would you know unless
you were into R/C? Besides, many R/C planes acrually *do* use
converted chainsaw motors... they just aren't as light and powerful
as
something like the DA motor, but are a whole lot cheaper! And
gas&oil
mix is far less expensive than the glow fuel that the traditional R/C
motors use.

I made a boat powered with a weed eater motor when I was a kid. It
was
a lot of fun!

Theres' several vids on u-tube that show 'em. That is kinda cool. I'd
thought of it also, but eh, too many other projects.

I saw some R/C boats at Perry, GA at a R/C swap meet and show they
have there every year. There are groups that race them, and some of
them will do 70+ mph. There was a guy that was selling one a few
years back that was a twin-engine model, and it had been clocked over
100mph.

I looked into it thinking it woiuld be fun when we're out on the
lake. Up in a quiet cove, fire up and toss out an R/C boat and let
'er rip! They do make smaller electric powered ones that would be OK
and the costs are reasonable, but one of those gas powered fast ones
can approach $1000 real quick.

There was one on a small lake down the shore a few years ago. Although
it was legal, the noise was terrible. The locals literally drove the guy
off by threatening to do **** to his car and stuff...


If they did that, would they be tossed on the stairs at the local police
station?

I think you'd have to get real stupid and challenge the cops before that
would happen.
Most people smarten up once in custody.

Another stupid reply from Don just to stick his nose up Harry's ass.

OT- Absolutely amazing radio controlled B-29
 

"Spoofer" wrote in message
...
In article ,
says...

"Spoofer" wrote in message
...
In article ,
says...

"Harryk" wrote in message
...
On 1/19/11 10:06 AM, I am Tosk wrote:
In article11995c49-2fb8-42dc-adcb-5612d0548db6@
32g2000yqz.googlegroups.com, says...

On Jan 18, 9:58 pm, wrote:
On Jan 18, 7:00 pm, L wrote:





Jack. wrote:
On Jan 17, 9:21 pm, wrote:

On Jan 17, 8:12 am, wrote:

On Jan 16, 5:47 pm, wrote:

A B29 model powered by 4 chainsaw engines... Complete with a
mid-air
launch of an X1 rocket! Here's where a lot of work pays
off.

http://users.skynet.be/fa926657/files/B29.wmv

I've seen that thing fly twice, and watched him crash it
once.
After
the X1 landed, he spun the B29 down from way up high, where
he'd
been
circling while the X1 did it's thing. Then he flew down the
runway
doing slow rolls, and during one of the rolls the outer third
of
one
of the wings folded up. That was several years ago, and I
understand
it's been crashed and rebuilt more than once since.

The original B29 was built by a guy who didn't get a chance
to
finish
it before he passed away. The family gave it to Mac Hodges,
and
he
finished it and began flying it at RC events.

BTW... those aren't exactly "chainsaw" motors. They are
purpose-built
for RC aircraft use. The current B29 has four DA-100 motors
that
are
twin cylinder, 100cc and cost $1000 each. Yes, with all the
motors,
radio gear, and airframe it's probably $6000 - 7000 in the
air.
Just
the props can be over $100 each.

Here's the motor used:
http://www.desertaircraft.com/engine...hp?Page=DA-100

I passed on the info as I recieved it.

Thanks for the correction.

It was not meant in any mean-spirited way. How would you know
unless
you were into R/C? Besides, many R/C planes acrually *do* use
converted chainsaw motors... they just aren't as light and
powerful
as
something like the DA motor, but are a whole lot cheaper! And
gas&oil
mix is far less expensive than the glow fuel that the
traditional
R/C
motors use.

I made a boat powered with a weed eater motor when I was a kid.
It
was
a lot of fun!

Theres' several vids on u-tube that show 'em. That is kinda
cool.
I'd
thought of it also, but eh, too many other projects.

I saw some R/C boats at Perry, GA at a R/C swap meet and show they
have there every year. There are groups that race them, and some
of
them will do 70+ mph. There was a guy that was selling one a few
years back that was a twin-engine model, and it had been clocked
over
100mph.

I looked into it thinking it woiuld be fun when we're out on the
lake. Up in a quiet cove, fire up and toss out an R/C boat and
let
'er rip! They do make smaller electric powered ones that would be
OK
and the costs are reasonable, but one of those gas powered fast
ones
can approach $1000 real quick.

There was one on a small lake down the shore a few years ago.
Although
it was legal, the noise was terrible. The locals literally drove
the
guy
off by threatening to do **** to his car and stuff...


If they did that, would they be tossed on the stairs at the local
police
station?

I think you'd have to get real stupid and challenge the cops before
that
would happen.
Most people smarten up once in custody.

Another stupid reply from Don just to stick his nose up Harry's ass.

Kevin... that male buttock fetish of yours is creeping out again.

Third time's a charm, who is Kevin? And what does that person have to do
with me?

Stop it Kevin.
Your current bunch of buddies outed you a few years ago.
Everyone knows about Snellville GA and your less than stellar performance at
the engineering company in Tucker Ga.

OT- Absolutely amazing radio controlled B-29
 

In article ,
says...

"Spoofer" wrote in message
...
In article ,
says...

"Spoofer" wrote in message
...
In article ,
says...

"Harryk" wrote in message
...
On 1/19/11 10:06 AM, I am Tosk wrote:
In article11995c49-2fb8-42dc-adcb-5612d0548db6@
32g2000yqz.googlegroups.com, says...

On Jan 18, 9:58 pm, wrote:
On Jan 18, 7:00 pm, L wrote:





Jack. wrote:
On Jan 17, 9:21 pm, wrote:

On Jan 17, 8:12 am, wrote:

On Jan 16, 5:47 pm, wrote:

A B29 model powered by 4 chainsaw engines... Complete with a
mid-air
launch of an X1 rocket! Here's where a lot of work pays
off.

http://users.skynet.be/fa926657/files/B29.wmv

I've seen that thing fly twice, and watched him crash it
once.
After
the X1 landed, he spun the B29 down from way up high, where
he'd
been
circling while the X1 did it's thing. Then he flew down the
runway
doing slow rolls, and during one of the rolls the outer third
of
one
of the wings folded up. That was several years ago, and I
understand
it's been crashed and rebuilt more than once since.

The original B29 was built by a guy who didn't get a chance
to
finish
it before he passed away. The family gave it to Mac Hodges,
and
he
finished it and began flying it at RC events.

BTW... those aren't exactly "chainsaw" motors. They are
purpose-built
for RC aircraft use. The current B29 has four DA-100 motors
that
are
twin cylinder, 100cc and cost $1000 each. Yes, with all the
motors,
radio gear, and airframe it's probably $6000 - 7000 in the
air.
Just
the props can be over $100 each.

Here's the motor used:
http://www.desertaircraft.com/engine...hp?Page=DA-100

I passed on the info as I recieved it.

Thanks for the correction.

It was not meant in any mean-spirited way. How would you know
unless
you were into R/C? Besides, many R/C planes acrually *do* use
converted chainsaw motors... they just aren't as light and
powerful
as
something like the DA motor, but are a whole lot cheaper! And
gas&oil
mix is far less expensive than the glow fuel that the
traditional
R/C
motors use.

I made a boat powered with a weed eater motor when I was a kid.
It
was
a lot of fun!

Theres' several vids on u-tube that show 'em. That is kinda
cool.
I'd
thought of it also, but eh, too many other projects.

I saw some R/C boats at Perry, GA at a R/C swap meet and show they
have there every year. There are groups that race them, and some
of
them will do 70+ mph. There was a guy that was selling one a few
years back that was a twin-engine model, and it had been clocked
over
100mph.

I looked into it thinking it woiuld be fun when we're out on the
lake. Up in a quiet cove, fire up and toss out an R/C boat and
let
'er rip! They do make smaller electric powered ones that would be
OK
and the costs are reasonable, but one of those gas powered fast
ones
can approach $1000 real quick.

There was one on a small lake down the shore a few years ago.
Although
it was legal, the noise was terrible. The locals literally drove
the
guy
off by threatening to do **** to his car and stuff...


If they did that, would they be tossed on the stairs at the local
police
station?

I think you'd have to get real stupid and challenge the cops before
that
would happen.
Most people smarten up once in custody.

Another stupid reply from Don just to stick his nose up Harry's ass.

Kevin... that male buttock fetish of yours is creeping out again.

Third time's a charm, who is Kevin? And what does that person have to do
with me?

Stop it Kevin.
Your current bunch of buddies outed you a few years ago.
Everyone knows about Snellville GA and your less than stellar performance at
the engineering company in Tucker Ga.

If you don't know my name, say so. Just quit calling me someone I'm not.
What the **** do *I* have to do with ANYBODY from Snellville, or Tucker
Georgia? You are proving yourself a fool. Slammer has gone off his meds
and is acting just like you! You think everyone's someone named Kevin,
and slammer thinks everyone is loogy!! Good pair!