Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
posted to rec.boats
external usenet poster
 
First recorded activity by BoatBanter: Jun 2010
Posts: 568
Default French

In article ,
says...

...doors...

http://tinyurl.com/2ecnx3g


Installed! Whew!

Still have to paint trim, install screen doors.

Took just a tiny shim on one side to level left to right. Concrete floor
was perfectly flat. Built-in locks lined up perfectly, as did the deadbolt.


Pssst, spoofer, I took mechanical engineering courses, there is no such
thing as "perfectly flat". Especially a concrete floor.
  #2   Report Post  
posted to rec.boats
external usenet poster
 
First recorded activity by BoatBanter: Apr 2010
Posts: 3,578
Default French


"Secular Humanist" wrote in message
m...
...doors...

http://tinyurl.com/2ecnx3g


Installed! Whew!

Still have to paint trim, install screen doors.

Took just a tiny shim on one side to level left to right. Concrete floor
was perfectly flat. Built-in locks lined up perfectly, as did the
deadbolt.


Interesting... looks like they could have been wider? Or was there some
structural issue?


  #3   Report Post  
posted to rec.boats
external usenet poster
 
First recorded activity by BoatBanter: Aug 2010
Posts: 144
Default French

On 8/20/10 1:32 PM, nom=de=plume wrote:

"Secular Humanist" wrote in message
m...
...doors...

http://tinyurl.com/2ecnx3g


Installed! Whew!

Still have to paint trim, install screen doors.

Took just a tiny shim on one side to level left to right. Concrete
floor was perfectly flat. Built-in locks lined up perfectly, as did
the deadbolt.


Interesting... looks like they could have been wider? Or was there some
structural issue?




The 60" opening could have been made wider when the house was built. I
could have hired a good carpenter to make it wider during this latest
project, but the expense would have been substantial. Such a project is
way beyond my rudimentary carpentry skills.

The sliders were a problem, since the widest opening they would allow
was less than 30". But now, with these double opening doors, I can pull
both open at the same time.

Guess who sits on that little footstool... meow!
  #4   Report Post  
posted to rec.boats
external usenet poster
 
First recorded activity by BoatBanter: Jun 2010
Posts: 568
Default French

In article ,
says...

On 8/20/10 1:32 PM, nom=de=plume wrote:

"Secular Humanist" wrote in message
m...
...doors...

http://tinyurl.com/2ecnx3g


Installed! Whew!

Still have to paint trim, install screen doors.

Took just a tiny shim on one side to level left to right. Concrete
floor was perfectly flat. Built-in locks lined up perfectly, as did
the deadbolt.


Interesting... looks like they could have been wider? Or was there some
structural issue?




The 60" opening could have been made wider when the house was built. I
could have hired a good carpenter to make it wider during this latest
project, but the expense would have been substantial. Such a project is
way beyond my rudimentary carpentry skills.

The sliders were a problem, since the widest opening they would allow
was less than 30". But now, with these double opening doors, I can pull
both open at the same time.

Guess who sits on that little footstool... meow!


My bobcat sits there, spoofer.
  #5   Report Post  
posted to rec.boats
external usenet poster
 
First recorded activity by BoatBanter: Apr 2010
Posts: 1,865
Default French



"Secular Humanist" wrote in message
m...
On 8/20/10 1:32 PM, nom=de=plume wrote:

"Secular Humanist" wrote in message
m...
...doors...

http://tinyurl.com/2ecnx3g


Installed! Whew!

Still have to paint trim, install screen doors.

Took just a tiny shim on one side to level left to right. Concrete
floor was perfectly flat. Built-in locks lined up perfectly, as did
the deadbolt.


Interesting... looks like they could have been wider? Or was there some
structural issue?




The 60" opening could have been made wider when the house was built. I
could have hired a good carpenter to make it wider during this latest
project, but the expense would have been substantial. Such a project is
way beyond my rudimentary carpentry skills.

The sliders were a problem, since the widest opening they would allow was
less than 30". But now, with these double opening doors, I can pull both
open at the same time.

Guess who sits on that little footstool... meow!


When I built a new cape Cod style house back in 1975/76 I installed 5' wide
sliding doors.
It was plenty wide to pass through.... but some of the fat assed dopers
might struggle a bit.



  #6   Report Post  
posted to rec.boats
external usenet poster
 
First recorded activity by BoatBanter: Jun 2010
Posts: 568
Default French

In article ,
says...

"Secular Humanist" wrote in message
m...
On 8/20/10 1:32 PM, nom=de=plume wrote:

"Secular Humanist" wrote in message
m...
...doors...

http://tinyurl.com/2ecnx3g


Installed! Whew!

Still have to paint trim, install screen doors.

Took just a tiny shim on one side to level left to right. Concrete
floor was perfectly flat. Built-in locks lined up perfectly, as did
the deadbolt.


Interesting... looks like they could have been wider? Or was there some
structural issue?




The 60" opening could have been made wider when the house was built. I
could have hired a good carpenter to make it wider during this latest
project, but the expense would have been substantial. Such a project is
way beyond my rudimentary carpentry skills.

The sliders were a problem, since the widest opening they would allow was
less than 30". But now, with these double opening doors, I can pull both
open at the same time.

Guess who sits on that little footstool... meow!


When I built a new cape Cod style house back in 1975/76 I installed 5' wide
sliding doors.
It was plenty wide to pass through.... but some of the fat assed dopers
might struggle a bit.


Who are the "fat assed dopers?" Your son and his friends? And how come
it's taken you three years to paint your little house?
  #7   Report Post  
posted to rec.boats
external usenet poster
 
First recorded activity by BoatBanter: Jun 2010
Posts: 884
Default French

On 8/20/10 2:49 PM, YukonBound wrote:


"Secular Humanist" wrote in message
m...
On 8/20/10 1:32 PM, nom=de=plume wrote:

"Secular Humanist" wrote in message
m...
...doors...

http://tinyurl.com/2ecnx3g


Installed! Whew!

Still have to paint trim, install screen doors.

Took just a tiny shim on one side to level left to right. Concrete
floor was perfectly flat. Built-in locks lined up perfectly, as did
the deadbolt.


Interesting... looks like they could have been wider? Or was there some
structural issue?




The 60" opening could have been made wider when the house was built. I
could have hired a good carpenter to make it wider during this latest
project, but the expense would have been substantial. Such a project
is way beyond my rudimentary carpentry skills.

The sliders were a problem, since the widest opening they would allow
was less than 30". But now, with these double opening doors, I can
pull both open at the same time.

Guess who sits on that little footstool... meow!


When I built a new cape Cod style house back in 1975/76 I installed 5'
wide sliding doors.
It was plenty wide to pass through.... but some of the fat assed dopers
might struggle a bit.


I try my best not to discuss Fat Asses, and I wish you wouldn't, it just
gets the dopers into a feeding frenzy talking about the photo I took at
del Coronado

--
I'm the real Harry, and I post from a Mac, as virtually everyone knows.
If a post is attributed to me, and it isn't from a Mac, it's from an ID
spoofer who hasn't the balls to post with his own ID.
  #8   Report Post  
posted to rec.boats
external usenet poster
 
First recorded activity by BoatBanter: Aug 2010
Posts: 563
Default French

In article ,
says...

On 8/20/10 2:49 PM, YukonBound wrote:


"Secular Humanist" wrote in message
m...
On 8/20/10 1:32 PM, nom=de=plume wrote:

"Secular Humanist" wrote in message
m...
...doors...

http://tinyurl.com/2ecnx3g


Installed! Whew!

Still have to paint trim, install screen doors.

Took just a tiny shim on one side to level left to right. Concrete
floor was perfectly flat. Built-in locks lined up perfectly, as did
the deadbolt.


Interesting... looks like they could have been wider? Or was there some
structural issue?




The 60" opening could have been made wider when the house was built. I
could have hired a good carpenter to make it wider during this latest
project, but the expense would have been substantial. Such a project
is way beyond my rudimentary carpentry skills.

The sliders were a problem, since the widest opening they would allow
was less than 30". But now, with these double opening doors, I can
pull both open at the same time.

Guess who sits on that little footstool... meow!


When I built a new cape Cod style house back in 1975/76 I installed 5'
wide sliding doors.
It was plenty wide to pass through.... but some of the fat assed dopers
might struggle a bit.


I try my best not to discuss Fat Asses, and I wish you wouldn't, it just
gets the dopers into a feeding frenzy talking about the photo I took at
del Coronado


Spoofer alert! That photo I took just showed my hand. It was swollen
from water weight gain. It was that time of the month.
  #9   Report Post  
posted to rec.boats
external usenet poster
 
First recorded activity by BoatBanter: Aug 2010
Posts: 130
Default French

YukonBound wrote:


"Secular Humanist" wrote in message
m...
On 8/20/10 1:32 PM, nom=de=plume wrote:

"Secular Humanist" wrote in message
m...
...doors...

http://tinyurl.com/2ecnx3g


Installed! Whew!

Still have to paint trim, install screen doors.

Took just a tiny shim on one side to level left to right. Concrete
floor was perfectly flat. Built-in locks lined up perfectly, as did
the deadbolt.


Interesting... looks like they could have been wider? Or was there some
structural issue?




The 60" opening could have been made wider when the house was built.
I could have hired a good carpenter to make it wider during this
latest project, but the expense would have been substantial. Such a
project is way beyond my rudimentary carpentry skills.

The sliders were a problem, since the widest opening they would allow
was less than 30". But now, with these double opening doors, I can
pull both open at the same time.

Guess who sits on that little footstool... meow!


When I built a new cape Cod style house back in 1975/76 I installed 5'
wide sliding doors.
It was plenty wide to pass through.... but some of the fat assed
dopers might struggle a bit.

You couldn't build a bird house.
  #10   Report Post  
posted to rec.boats
external usenet poster
 
First recorded activity by BoatBanter: Nov 2009
Posts: 2,921
Default French

In article ,
says...

YukonBound wrote:


"Secular Humanist" wrote in message
m...
On 8/20/10 1:32 PM, nom=de=plume wrote:

"Secular Humanist" wrote in message
m...
...doors...

http://tinyurl.com/2ecnx3g


Installed! Whew!

Still have to paint trim, install screen doors.

Took just a tiny shim on one side to level left to right. Concrete
floor was perfectly flat. Built-in locks lined up perfectly, as did
the deadbolt.


Interesting... looks like they could have been wider? Or was there some
structural issue?




The 60" opening could have been made wider when the house was built.
I could have hired a good carpenter to make it wider during this
latest project, but the expense would have been substantial. Such a
project is way beyond my rudimentary carpentry skills.

The sliders were a problem, since the widest opening they would allow
was less than 30". But now, with these double opening doors, I can
pull both open at the same time.

Guess who sits on that little footstool... meow!


When I built a new cape Cod style house back in 1975/76 I installed 5'
wide sliding doors.
It was plenty wide to pass through.... but some of the fat assed
dopers might struggle a bit.

You couldn't build a bird house.


LOL... This is just too funny between Bonnie and Harry...

--
Rowdy Mouse Racing - We race for cheese!


Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is Off
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
new_Wb_58_Lewis R. French, a 130 year-old coasting schooner, built 1871 by the French bros., Christmas Cove, Me., Photographed on Eggemoggin Reach, Me._B. Mendlowitz_sqs squeegees Tall Ship Photos 0 September 21st 09 05:08 AM
The French are coming... Don White General 14 April 28th 07 01:45 PM
The French need Guns! Bob Crantz ASA 21 November 9th 05 01:00 PM
Damn French! John Cairns ASA 22 November 24th 04 09:08 PM
OT--The French...again! NOYB General 8 December 29th 03 11:21 PM


All times are GMT +1. The time now is 10:24 AM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 BoatBanter.com.
The comments are property of their posters.
 

About Us

"It's about Boats"

 

Copyright © 2017