Great Artwork - Suitable for framing...
 

On 7/9/10 5:24 PM, Harold' wrote:
wrote in message
...

wrote in message
...

wrote in message
...
On Fri, 9 Jul 2010 00:11:14 -0700,
wrote:

You should really get to a good orthopedic guy or neurologist and get
that knee jerk of yours checked out. Just because Wayne B is out
trolling again doesn't mean that you need to be first on the hook.

You should really find time to invest in a brain. You're a jerk, a
racist,
and a liar.

Well John, she's at the boat, guess you'll have to gaff her now.

I thought this was a catch and release sport. Don't use the gaff unless
you are planning to make a meal of the carcass.


In that case, when do they let you out of the booby hatch?


Booby hatch?




An institution for the mentally ill.

You have two big state mental hospitals north of where you are right now...

Northeast Florida State Hospital in Macclenney...
Florida State Hospital in Chattahoochie...

Great Artwork - Suitable for framing...
 

"nom=de=plume" wrote in message
...

"Wayne.B" wrote in message
...
On Fri, 9 Jul 2010 00:10:22 -0700, "nom=de=plume"
wrote:

"Wayne.B" wrote in message
...
On Thu, 8 Jul 2010 17:01:12 -0700, "nom=de=plume"
wrote:

As to my suggestion... planning in advance, attach a send line

Usually called a trip line.

Ok a trip line. Add a pulley and a line that is long enough.

Add a pulley, aka, block where ?



Here you go... obviously this is not to scale, but I think you'll get the
idea. More than one fender could be lowered, and in the drawing, the
anchor marker is already on board.

http://img706.imageshack.us/img706/7...rretrieval.png

All you have to do is to have the marker attached to a line that already
goes through a block at the anchor. You could even leave it as a light
line, then if there's a problem, tie a heavier line to the lighter line
and pull it through to the point where you could attach a fender.

Another option (not sure if it's really workable) would be to have a CO2
cartridge ready at the anchor... you pull the float line, and pop! My
inflatable vest claims 36 lbs. of lift... something like that..., but I
still think the multiple fender option would work better.


All you have to do is figger a way to keep the anchor from spinnin on the
way down, for obvious reasons,

Great Artwork - Suitable for framing...
 

"Harold'" wrote in message
...

"nom=de=plume" wrote in message
...

"Wayne.B" wrote in message
...
On Fri, 9 Jul 2010 00:10:22 -0700, "nom=de=plume"
wrote:

"Wayne.B" wrote in message
m...
On Thu, 8 Jul 2010 17:01:12 -0700, "nom=de=plume"
wrote:

As to my suggestion... planning in advance, attach a send line

Usually called a trip line.

Ok a trip line. Add a pulley and a line that is long enough.

Add a pulley, aka, block where ?



Here you go... obviously this is not to scale, but I think you'll get the
idea. More than one fender could be lowered, and in the drawing, the
anchor marker is already on board.

http://img706.imageshack.us/img706/7...rretrieval.png

All you have to do is to have the marker attached to a line that already
goes through a block at the anchor. You could even leave it as a light
line, then if there's a problem, tie a heavier line to the lighter line
and pull it through to the point where you could attach a fender.

Another option (not sure if it's really workable) would be to have a CO2
cartridge ready at the anchor... you pull the float line, and pop! My
inflatable vest claims 36 lbs. of lift... something like that..., but I
still think the multiple fender option would work better.


All you have to do is figger a way to keep the anchor from spinnin on the
way down, for obvious reasons,


Spinning?? What's that got to do with retrieval? The fender wouldn't be
attached until you need it. Are you stupid or what.

Great Artwork - Suitable for framing...
 

"Harold'" wrote in message
...

"nom=de=plume" wrote in message
...

"Harold" wrote in message
...

"Wayne.B" wrote in message
...
On Fri, 9 Jul 2010 00:11:14 -0700, "nom=de=plume"
wrote:

You should really get to a good orthopedic guy or neurologist and get
that knee jerk of yours checked out. Just because Wayne B is out
trolling again doesn't mean that you need to be first on the hook.

You should really find time to invest in a brain. You're a jerk, a
racist,
and a liar.

Well John, she's at the boat, guess you'll have to gaff her now.

I thought this was a catch and release sport. Don't use the gaff unless
you are planning to make a meal of the carcass.


In that case, when do they let you out of the booby hatch?


Booby hatch?


http://www.google.com/search?hl=en&d...S&ved=0CBIQkAE

Great Artwork - Suitable for framing...
 

"Harry " wrote in message
...
On 7/9/10 5:24 PM, Harold' wrote:
wrote in message
...

wrote in message
...

wrote in message
...
On Fri, 9 Jul 2010 00:11:14 -0700,
wrote:

You should really get to a good orthopedic guy or neurologist and
get
that knee jerk of yours checked out. Just because Wayne B is out
trolling again doesn't mean that you need to be first on the hook.

You should really find time to invest in a brain. You're a jerk, a
racist,
and a liar.

Well John, she's at the boat, guess you'll have to gaff her now.

I thought this was a catch and release sport. Don't use the gaff unless
you are planning to make a meal of the carcass.


In that case, when do they let you out of the booby hatch?


Booby hatch?




An institution for the mentally ill.

You have two big state mental hospitals north of where you are right
now...

Northeast Florida State Hospital in Macclenney...
Florida State Hospital in Chattahoochie...

I think he's probably familiar with that type of institution... from the
inside.

Great Artwork - Suitable for framing...
 

On Fri, 9 Jul 2010 11:36:28 -0700, "nom=de=plume"
wrote:


"Wayne.B" wrote in message
.. .
On Fri, 9 Jul 2010 00:11:14 -0700, "nom=de=plume"
wrote:

You should really get to a good orthopedic guy or neurologist and get
that knee jerk of yours checked out. Just because Wayne B is out
trolling again doesn't mean that you need to be first on the hook.

You should really find time to invest in a brain. You're a jerk, a racist,
and a liar.

Well John, she's at the boat, guess you'll have to gaff her now.


Well, you sure aren't sounding like the adult some people thought you
were...


Sorry if I have failed to meet your expectations in some way. Adults
are allowed to have a sense of humor you know, and there is plenty of
humor here in some of these exchanges.

Great Artwork - Suitable for framing...
 

"nom=de=plume" wrote in message
...

"Harold'" wrote in message
...

"nom=de=plume" wrote in message
...

"Wayne.B" wrote in message
...
On Fri, 9 Jul 2010 00:10:22 -0700, "nom=de=plume"
wrote:

"Wayne.B" wrote in message
om...
On Thu, 8 Jul 2010 17:01:12 -0700, "nom=de=plume"

wrote:

As to my suggestion... planning in advance, attach a send line

Usually called a trip line.

Ok a trip line. Add a pulley and a line that is long enough.

Add a pulley, aka, block where ?



Here you go... obviously this is not to scale, but I think you'll get
the idea. More than one fender could be lowered, and in the drawing, the
anchor marker is already on board.

http://img706.imageshack.us/img706/7...rretrieval.png

All you have to do is to have the marker attached to a line that already
goes through a block at the anchor. You could even leave it as a light
line, then if there's a problem, tie a heavier line to the lighter line
and pull it through to the point where you could attach a fender.

Another option (not sure if it's really workable) would be to have a CO2
cartridge ready at the anchor... you pull the float line, and pop! My
inflatable vest claims 36 lbs. of lift... something like that..., but I
still think the multiple fender option would work better.


All you have to do is figger a way to keep the anchor from spinnin on the
way down, for obvious reasons,


Spinning?? What's that got to do with retrieval? The fender wouldn't be
attached until you need it. Are you stupid or what.


Actually it's you that's stupid. The trip line could and probably would get
twisted around the rode rendering the whole getup useless as tits on a bull.
Get it now dummy.

Great Artwork - Suitable for framing...
 

On Fri, 09 Jul 2010 18:09:20 -0400, Wayne.B
wrote:

On Fri, 9 Jul 2010 11:36:28 -0700, "nom=de=plume"
wrote:


"Wayne.B" wrote in message
. ..
On Fri, 9 Jul 2010 00:11:14 -0700, "nom=de=plume"
wrote:

You should really get to a good orthopedic guy or neurologist and get
that knee jerk of yours checked out. Just because Wayne B is out
trolling again doesn't mean that you need to be first on the hook.

You should really find time to invest in a brain. You're a jerk, a racist,
and a liar.

Well John, she's at the boat, guess you'll have to gaff her now.


Well, you sure aren't sounding like the adult some people thought you
were...


Sorry if I have failed to meet your expectations in some way. Adults
are allowed to have a sense of humor you know, and there is plenty of
humor here in some of these exchanges.

She's not figured that out yet.
--
John H

All decisions are the result of binary thinking.

Great Artwork - Suitable for framing...
 

"nom=de=plume" wrote in message
...

"Harold'" wrote in message
...

"nom=de=plume" wrote in message
...

"Harold" wrote in message
...

"Wayne.B" wrote in message
...
On Fri, 9 Jul 2010 00:11:14 -0700, "nom=de=plume"
wrote:

You should really get to a good orthopedic guy or neurologist and
get
that knee jerk of yours checked out. Just because Wayne B is out
trolling again doesn't mean that you need to be first on the hook.

You should really find time to invest in a brain. You're a jerk, a
racist,
and a liar.

Well John, she's at the boat, guess you'll have to gaff her now.

I thought this was a catch and release sport. Don't use the gaff unless
you are planning to make a meal of the carcass.


In that case, when do they let you out of the booby hatch?


Booby hatch?


http://www.google.com/search?hl=en&d...S&ved=0CBIQkAE


Do you think I can't google, you frikkin moron?

Great Artwork - Suitable for framing...
 

"Harold'" wrote in message
...

"nom=de=plume" wrote in message
...

"Harold'" wrote in message
...

"nom=de=plume" wrote in message
...

"Wayne.B" wrote in message
...
On Fri, 9 Jul 2010 00:10:22 -0700, "nom=de=plume"
wrote:

"Wayne.B" wrote in message
news:jsuc36dnph8qu25fm8273ca0jl6b9i9459@4ax. com...
On Thu, 8 Jul 2010 17:01:12 -0700, "nom=de=plume"

wrote:

As to my suggestion... planning in advance, attach a send line

Usually called a trip line.

Ok a trip line. Add a pulley and a line that is long enough.

Add a pulley, aka, block where ?



Here you go... obviously this is not to scale, but I think you'll get
the idea. More than one fender could be lowered, and in the drawing,
the anchor marker is already on board.

http://img706.imageshack.us/img706/7...rretrieval.png

All you have to do is to have the marker attached to a line that
already goes through a block at the anchor. You could even leave it as
a light line, then if there's a problem, tie a heavier line to the
lighter line and pull it through to the point where you could attach a
fender.

Another option (not sure if it's really workable) would be to have a
CO2 cartridge ready at the anchor... you pull the float line, and pop!
My inflatable vest claims 36 lbs. of lift... something like that...,
but I still think the multiple fender option would work better.


All you have to do is figger a way to keep the anchor from spinnin on
the way down, for obvious reasons,


Spinning?? What's that got to do with retrieval? The fender wouldn't be
attached until you need it. Are you stupid or what.


Actually it's you that's stupid. The trip line could and probably would
get twisted around the rode rendering the whole getup useless as tits on a
bull. Get it now dummy.


What are you talking about??? Are you now claiming that a buoy line marking
your anchor position is going to make the anchor spin?

Looks like you're the one who's got the tits on a bull.

Yes, you're a dummy.

Great Artwork - Suitable for framing...
 

"Harold'" wrote in message
...

"nom=de=plume" wrote in message
...

"Harold'" wrote in message
...

"nom=de=plume" wrote in message
...

"Harold" wrote in message
...

"Wayne.B" wrote in message
...
On Fri, 9 Jul 2010 00:11:14 -0700, "nom=de=plume"

wrote:

You should really get to a good orthopedic guy or neurologist and
get
that knee jerk of yours checked out. Just because Wayne B is out
trolling again doesn't mean that you need to be first on the hook.

You should really find time to invest in a brain. You're a jerk, a
racist,
and a liar.

Well John, she's at the boat, guess you'll have to gaff her now.

I thought this was a catch and release sport. Don't use the gaff
unless you are planning to make a meal of the carcass.


In that case, when do they let you out of the booby hatch?


Booby hatch?


http://www.google.com/search?hl=en&d...S&ved=0CBIQkAE


Do you think I can't google, you frikkin moron?


No.

Great Artwork - Suitable for framing...
 

"Wayne.B" wrote in message
...
On Fri, 9 Jul 2010 11:36:28 -0700, "nom=de=plume"
wrote:


"Wayne.B" wrote in message
. ..
On Fri, 9 Jul 2010 00:11:14 -0700, "nom=de=plume"
wrote:

You should really get to a good orthopedic guy or neurologist and get
that knee jerk of yours checked out. Just because Wayne B is out
trolling again doesn't mean that you need to be first on the hook.

You should really find time to invest in a brain. You're a jerk, a
racist,
and a liar.

Well John, she's at the boat, guess you'll have to gaff her now.


Well, you sure aren't sounding like the adult some people thought you
were...


Sorry if I have failed to meet your expectations in some way. Adults
are allowed to have a sense of humor you know, and there is plenty of
humor here in some of these exchanges.


Not with John the liar. You're the one who chastised me for not allowing
John's racism/lies to go unanswered.

Great Artwork - Suitable for framing...
 

"John H" wrote in message
...
On Fri, 09 Jul 2010 18:09:20 -0400, Wayne.B

wrote:

On Fri, 9 Jul 2010 11:36:28 -0700, "nom=de=plume"
wrote:


"Wayne.B" wrote in message
...
On Fri, 9 Jul 2010 00:11:14 -0700, "nom=de=plume"
wrote:

You should really get to a good orthopedic guy or neurologist and get
that knee jerk of yours checked out. Just because Wayne B is out
trolling again doesn't mean that you need to be first on the hook.

You should really find time to invest in a brain. You're a jerk, a
racist,
and a liar.

Well John, she's at the boat, guess you'll have to gaff her now.


Well, you sure aren't sounding like the adult some people thought you
were...


Sorry if I have failed to meet your expectations in some way. Adults
are allowed to have a sense of humor you know, and there is plenty of
humor here in some of these exchanges.

She's not figured that out yet.
--
John H

All decisions are the result of binary thinking.

You haven't figured out most of anything yet.

Doubtful you ever will.

Great Artwork - Suitable for framing...
 

On Fri, 9 Jul 2010 16:16:39 -0700, "nom=de=plume"
wrote:

Not with John the liar. You're the one who chastised me for not allowing
John's racism/lies to go unanswered.

John is trolling.

Great Artwork - Suitable for framing...
 

"nom=de=plume" wrote in message
...

"Harold'" wrote in message
...

"nom=de=plume" wrote in message
...

"Harold'" wrote in message
...

"nom=de=plume" wrote in message
...

"Wayne.B" wrote in message
...
On Fri, 9 Jul 2010 00:10:22 -0700, "nom=de=plume"

wrote:

"Wayne.B" wrote in message
news:jsuc36dnph8qu25fm8273ca0jl6b9i9459@4ax .com...
On Thu, 8 Jul 2010 17:01:12 -0700, "nom=de=plume"

wrote:

As to my suggestion... planning in advance, attach a send line

Usually called a trip line.

Ok a trip line. Add a pulley and a line that is long enough.

Add a pulley, aka, block where ?



Here you go... obviously this is not to scale, but I think you'll get
the idea. More than one fender could be lowered, and in the drawing,
the anchor marker is already on board.

http://img706.imageshack.us/img706/7...rretrieval.png

All you have to do is to have the marker attached to a line that
already goes through a block at the anchor. You could even leave it as
a light line, then if there's a problem, tie a heavier line to the
lighter line and pull it through to the point where you could attach a
fender.

Another option (not sure if it's really workable) would be to have a
CO2 cartridge ready at the anchor... you pull the float line, and pop!
My inflatable vest claims 36 lbs. of lift... something like that...,
but I still think the multiple fender option would work better.


All you have to do is figger a way to keep the anchor from spinnin on
the way down, for obvious reasons,


Spinning?? What's that got to do with retrieval? The fender wouldn't be
attached until you need it. Are you stupid or what.


Actually it's you that's stupid. The trip line could and probably would
get twisted around the rode rendering the whole getup useless as tits on
a bull. Get it now dummy.


What are you talking about??? Are you now claiming that a buoy line
marking your anchor position is going to make the anchor spin?

Looks like you're the one who's got the tits on a bull.

Yes, you're a dummy.



Didn't see any bouy line or bouy in your drawing. I see a fender, a block,
and a trip line attached to the crown of an anchor. What gives with that
contraption ? I'm mystified.

Great Artwork - Suitable for framing...
 

On Fri, 09 Jul 2010 20:58:33 -0400, Wayne.B
wrote:

On Fri, 9 Jul 2010 16:16:39 -0700, "nom=de=plume"
wrote:

Not with John the liar. You're the one who chastised me for not allowing
John's racism/lies to go unanswered.

John is trolling.

No, today it was just bottom fishing. Don't know if I want to start trolling
yet. Probably will though.
--
John H

All decisions are the result of binary thinking.

Great Artwork - Suitable for framing...
 

"Harold'" wrote in message
...

"nom=de=plume" wrote in message
...

"Harold'" wrote in message
...

"nom=de=plume" wrote in message
...

"Harold'" wrote in message
...

"nom=de=plume" wrote in message
...

"Wayne.B" wrote in message
...
On Fri, 9 Jul 2010 00:10:22 -0700, "nom=de=plume"

wrote:

"Wayne.B" wrote in message
news:jsuc36dnph8qu25fm8273ca0jl6b9i9459@4a x.com...
On Thu, 8 Jul 2010 17:01:12 -0700, "nom=de=plume"

wrote:

As to my suggestion... planning in advance, attach a send line

Usually called a trip line.

Ok a trip line. Add a pulley and a line that is long enough.

Add a pulley, aka, block where ?



Here you go... obviously this is not to scale, but I think you'll get
the idea. More than one fender could be lowered, and in the drawing,
the anchor marker is already on board.

http://img706.imageshack.us/img706/7...rretrieval.png

All you have to do is to have the marker attached to a line that
already goes through a block at the anchor. You could even leave it
as a light line, then if there's a problem, tie a heavier line to the
lighter line and pull it through to the point where you could attach
a fender.

Another option (not sure if it's really workable) would be to have a
CO2 cartridge ready at the anchor... you pull the float line, and
pop! My inflatable vest claims 36 lbs. of lift... something like
that..., but I still think the multiple fender option would work
better.


All you have to do is figger a way to keep the anchor from spinnin on
the way down, for obvious reasons,


Spinning?? What's that got to do with retrieval? The fender wouldn't be
attached until you need it. Are you stupid or what.


Actually it's you that's stupid. The trip line could and probably would
get twisted around the rode rendering the whole getup useless as tits on
a bull. Get it now dummy.


What are you talking about??? Are you now claiming that a buoy line
marking your anchor position is going to make the anchor spin?

Looks like you're the one who's got the tits on a bull.

Yes, you're a dummy.



Didn't see any bouy line or bouy in your drawing. I see a fender, a block,
and a trip line attached to the crown of an anchor. What gives with that
contraption ? I'm mystified.


Well, look again. Next time read the text also.

Great Artwork - Suitable for framing...
 

"Wayne.B" wrote in message
...
On Fri, 9 Jul 2010 16:16:39 -0700, "nom=de=plume"
wrote:

Not with John the liar. You're the one who chastised me for not allowing
John's racism/lies to go unanswered.

John is trolling.


And, he's a liar/racist.

Great Artwork - Suitable for framing...
 

"nom=de=plume" wrote in message
...

"Harold'" wrote in message
...

"nom=de=plume" wrote in message
...

"Harold'" wrote in message
...

"nom=de=plume" wrote in message
...

"Harold'" wrote in message
...

"nom=de=plume" wrote in message
...

"Wayne.B" wrote in message
...
On Fri, 9 Jul 2010 00:10:22 -0700, "nom=de=plume"

wrote:

"Wayne.B" wrote in message
news:jsuc36dnph8qu25fm8273ca0jl6b9i9459@4 ax.com...
On Thu, 8 Jul 2010 17:01:12 -0700, "nom=de=plume"

wrote:

As to my suggestion... planning in advance, attach a send line

Usually called a trip line.

Ok a trip line. Add a pulley and a line that is long enough.

Add a pulley, aka, block where ?



Here you go... obviously this is not to scale, but I think you'll
get the idea. More than one fender could be lowered, and in the
drawing, the anchor marker is already on board.

http://img706.imageshack.us/img706/7...rretrieval.png

All you have to do is to have the marker attached to a line that
already goes through a block at the anchor. You could even leave it
as a light line, then if there's a problem, tie a heavier line to
the lighter line and pull it through to the point where you could
attach a fender.

Another option (not sure if it's really workable) would be to have a
CO2 cartridge ready at the anchor... you pull the float line, and
pop! My inflatable vest claims 36 lbs. of lift... something like
that..., but I still think the multiple fender option would work
better.


All you have to do is figger a way to keep the anchor from spinnin on
the way down, for obvious reasons,


Spinning?? What's that got to do with retrieval? The fender wouldn't
be attached until you need it. Are you stupid or what.


Actually it's you that's stupid. The trip line could and probably would
get twisted around the rode rendering the whole getup useless as tits
on a bull. Get it now dummy.


What are you talking about??? Are you now claiming that a buoy line
marking your anchor position is going to make the anchor spin?

Looks like you're the one who's got the tits on a bull.

Yes, you're a dummy.



Didn't see any bouy line or bouy in your drawing. I see a fender, a
block, and a trip line attached to the crown of an anchor. What gives
with that contraption ? I'm mystified.


Well, look again. Next time read the text also.

Don't need to look again. Bouy lines (markers) are dropped to mark the
location of abandoned ground tackle. Don't see that in your drawing.
Aparently you didn't comprehend what you googled on the subject. At any rate
you don't have the imagination to dream up a plausable fix to your
hypothetical situation.
You are simply a young, imature gasbag who would turn any conversation into
an arguement.

Great Artwork - Suitable for framing...
 

"nom=de=plume" wrote in message
...

"Wayne.B" wrote in message
...
On Fri, 9 Jul 2010 16:16:39 -0700, "nom=de=plume"
wrote:

Not with John the liar. You're the one who chastised me for not allowing
John's racism/lies to go unanswered.

John is trolling.


And, he's a liar/racist.


Got proof?

Great Artwork - Suitable for framing...
 

"Harold'" wrote in message
...

"nom=de=plume" wrote in message
...

"Harold'" wrote in message
...

"nom=de=plume" wrote in message
...

"Harold'" wrote in message
...

"nom=de=plume" wrote in message
...

"Harold'" wrote in message
...

"nom=de=plume" wrote in message
...

"Wayne.B" wrote in message
...
On Fri, 9 Jul 2010 00:10:22 -0700, "nom=de=plume"

wrote:

"Wayne.B" wrote in message
news:jsuc36dnph8qu25fm8273ca0jl6b9i9459@ 4ax.com...
On Thu, 8 Jul 2010 17:01:12 -0700, "nom=de=plume"

wrote:

As to my suggestion... planning in advance, attach a send line

Usually called a trip line.

Ok a trip line. Add a pulley and a line that is long enough.

Add a pulley, aka, block where ?



Here you go... obviously this is not to scale, but I think you'll
get the idea. More than one fender could be lowered, and in the
drawing, the anchor marker is already on board.

http://img706.imageshack.us/img706/7...rretrieval.png

All you have to do is to have the marker attached to a line that
already goes through a block at the anchor. You could even leave it
as a light line, then if there's a problem, tie a heavier line to
the lighter line and pull it through to the point where you could
attach a fender.

Another option (not sure if it's really workable) would be to have
a CO2 cartridge ready at the anchor... you pull the float line, and
pop! My inflatable vest claims 36 lbs. of lift... something like
that..., but I still think the multiple fender option would work
better.


All you have to do is figger a way to keep the anchor from spinnin
on the way down, for obvious reasons,


Spinning?? What's that got to do with retrieval? The fender wouldn't
be attached until you need it. Are you stupid or what.


Actually it's you that's stupid. The trip line could and probably
would get twisted around the rode rendering the whole getup useless as
tits on a bull. Get it now dummy.


What are you talking about??? Are you now claiming that a buoy line
marking your anchor position is going to make the anchor spin?

Looks like you're the one who's got the tits on a bull.

Yes, you're a dummy.



Didn't see any bouy line or bouy in your drawing. I see a fender, a
block, and a trip line attached to the crown of an anchor. What gives
with that contraption ? I'm mystified.


Well, look again. Next time read the text also.

Don't need to look again. Bouy lines (markers) are dropped to mark the
location of abandoned ground tackle. Don't see that in your drawing.
Aparently you didn't comprehend what you googled on the subject. At any
rate you don't have the imagination to dream up a plausable fix to your
hypothetical situation.
You are simply a young, imature gasbag who would turn any conversation
into an arguement.


You're a moron. You don't need to read it again, because it flew right over
your mostly empty head.

You're the moron who started arguing. So, keep at it. Maybe it'll make you
look more like a man in your own eyes.

Great Artwork - Suitable for framing...
 

"Harold'" wrote in message
...

"nom=de=plume" wrote in message
...

"Wayne.B" wrote in message
...
On Fri, 9 Jul 2010 16:16:39 -0700, "nom=de=plume"
wrote:

Not with John the liar. You're the one who chastised me for not allowing
John's racism/lies to go unanswered.

John is trolling.


And, he's a liar/racist.


Got proof?


Yes. You're a moron.

Great Artwork - Suitable for framing...
 

John H wrote:
On Jul 8, 7:55 pm, wrote:

nom=de=plume wrote:


"John wrote in message
...

....and I understand this is one of the most popular pictures south
of our
border.


http://tinyurl.com/26rgt84
--
John H


All decisions are the result of binary thinking.


Yup.. you're a racist.

Anti-illegal immigration (the law in the US) is not racism. You are
transparent, dumb, and certainly not a lawyer.

She's not figured that out yet.

She never will...

Great Artwork - Suitable for framing...
 

YukonBound wrote:


"Harry" wrote in message
...
In article ,
says...

"Harry" wrote in message
...
In article ,
says...

On 7/8/10 5:13 PM, Wayne.B wrote:
On Thu, 8 Jul 2010 11:50:46 -0700,

wrote:

Yup.. you're a racist.

You should really get to a good orthopedic guy or neurologist
and get
that knee jerk of yours checked out. Just because John is out
trolling again doesn't mean that you need to be first on the hook.


W'hine...netcopper.

Spoofer alert! I certainly wouldn't call anyone a netcop, what
with my
special little buddy Don being the newsgroup typo nazi.

Well, learn proper grammar and how to spell. You'll have no trouble
from
me, Kevin.

WTF is Kevin, little buddy?

Kevin Noble would be you...a 54 year old engineering technician who
works in Tucker Ga.
Do you need your work number...or can you still remember it?
Stalking, Donnie? Is your life that boring? Does it make you feel
better about the fact that you have a dysfunctional family?

Great Artwork - Suitable for framing...
 

Wayne.B wrote:
On Fri, 9 Jul 2010 11:36:28 -0700,
wrote:


wrote in message
...

On Fri, 9 Jul 2010 00:11:14 -0700,
wrote:


You should really get to a good orthopedic guy or neurologist and get
that knee jerk of yours checked out. Just because Wayne B is out
trolling again doesn't mean that you need to be first on the hook.

You should really find time to invest in a brain. You're a jerk, a racist,
and a liar.

Well John, she's at the boat, guess you'll have to gaff her now.


Well, you sure aren't sounding like the adult some people thought you
were...


Sorry if I have failed to meet your expectations in some way. Adults
are allowed to have a sense of humor you know, and there is plenty of
humor here in some of these exchanges.


Don't waste your time on "her".

Great Artwork - Suitable for framing...
 

On 7/15/10 8:42 PM, Larry wrote:
YukonBound wrote:


"Harry" wrote in message
...
In article ,
says...

"Harry" wrote in message
...
In article ,
says...

On 7/8/10 5:13 PM, Wayne.B wrote:
On Thu, 8 Jul 2010 11:50:46 -0700,

wrote:

Yup.. you're a racist.

You should really get to a good orthopedic guy or neurologist
and get
that knee jerk of yours checked out. Just because John is out
trolling again doesn't mean that you need to be first on the hook.


W'hine...netcopper.

Spoofer alert! I certainly wouldn't call anyone a netcop, what
with my
special little buddy Don being the newsgroup typo nazi.

Well, learn proper grammar and how to spell. You'll have no trouble
from
me, Kevin.

WTF is Kevin, little buddy?

Kevin Noble would be you...a 54 year old engineering technician who
works in Tucker Ga.
Do you need your work number...or can you still remember it?
Stalking, Donnie? Is your life that boring? Does it make you feel better
about the fact that you have a dysfunctional family?


Dysfunctional? Going from Dan to Bob to Larry to Larry G, with a few
other handles I've forgotten...now that's dysfunctional.

Great Artwork - Suitable for framing...
 

On 7/15/10 8:46 PM, Larry wrote:
Wayne.B wrote:
On Fri, 9 Jul 2010 11:36:28 -0700,
wrote:

wrote in message
...
On Fri, 9 Jul 2010 00:11:14 -0700,
wrote:

You should really get to a good orthopedic guy or neurologist and get
that knee jerk of yours checked out. Just because Wayne B is out
trolling again doesn't mean that you need to be first on the hook.
You should really find time to invest in a brain. You're a jerk, a
racist,
and a liar.
Well John, she's at the boat, guess you'll have to gaff her now.

Well, you sure aren't sounding like the adult some people thought you
were...

Sorry if I have failed to meet your expectations in some way. Adults
are allowed to have a sense of humor you know, and there is plenty of
humor here in some of these exchanges.

Don't waste your time on "her".


Yeah...you're surely a much easier date.

Great Artwork - Suitable for framing...
 

"Harry " wrote in message
m...
On 7/15/10 8:42 PM, Larry wrote:
YukonBound wrote:


"Harry" wrote in message
...
In article ,
says...

"Harry" wrote in message
...
In article ,
says...

On 7/8/10 5:13 PM, Wayne.B wrote:
On Thu, 8 Jul 2010 11:50:46 -0700,

wrote:

Yup.. you're a racist.

You should really get to a good orthopedic guy or neurologist
and get
that knee jerk of yours checked out. Just because John is out
trolling again doesn't mean that you need to be first on the
hook.


W'hine...netcopper.

Spoofer alert! I certainly wouldn't call anyone a netcop, what
with my
special little buddy Don being the newsgroup typo nazi.

Well, learn proper grammar and how to spell. You'll have no trouble
from
me, Kevin.

WTF is Kevin, little buddy?

Kevin Noble would be you...a 54 year old engineering technician who
works in Tucker Ga.
Do you need your work number...or can you still remember it?
Stalking, Donnie? Is your life that boring? Does it make you feel better
about the fact that you have a dysfunctional family?


Dysfunctional? Going from Dan to Bob to Larry to Larry G, with a few other
handles I've forgotten...now that's dysfunctional.


Just plain weird!

Great Artwork - Suitable for framing...
 

"Harry " wrote in message
m...
On 7/15/10 8:46 PM, Larry wrote:
Wayne.B wrote:
On Fri, 9 Jul 2010 11:36:28 -0700,
wrote:

wrote in message
...
On Fri, 9 Jul 2010 00:11:14 -0700,
wrote:

You should really get to a good orthopedic guy or neurologist and
get
that knee jerk of yours checked out. Just because Wayne B is out
trolling again doesn't mean that you need to be first on the hook.
You should really find time to invest in a brain. You're a jerk, a
racist,
and a liar.
Well John, she's at the boat, guess you'll have to gaff her now.

Well, you sure aren't sounding like the adult some people thought you
were...

Sorry if I have failed to meet your expectations in some way. Adults
are allowed to have a sense of humor you know, and there is plenty of
humor here in some of these exchanges.

Don't waste your time on "her".


Yeah...you're surely a much easier date.

~~ Snerk ~~
Ditzy Dan trolling for a date with D'Wayne? Which one would be the man of
the house?

Great Artwork - Suitable for framing...
 

"Larry" wrote in message
...
John H wrote:
On Jul 8, 7:55 pm, wrote:

nom=de=plume wrote:


"John wrote in message
...

....and I understand this is one of the most popular pictures south
of our
border.


http://tinyurl.com/26rgt84
--
John H


All decisions are the result of binary thinking.


Yup.. you're a racist.

Anti-illegal immigration (the law in the US) is not racism. You are
transparent, dumb, and certainly not a lawyer.

She's not figured that out yet.

She never will...

You're a moron. Haven't I said that before? Oh, and John's a liar.

Great Artwork - Suitable for framing...
 

--
"Political correctness is a doctrine, fostered by a delusional, illogical
minority, and rabidly promoted by an unscrupulous mainstream media, which
holds forth the proposition that it is entirely possible to pick up a turd
by the clean end."

"YukonBound" wrote in message
...


"Harry ?" wrote in message
m...
On 7/15/10 8:46 PM, Larry wrote:
Wayne.B wrote:
On Fri, 9 Jul 2010 11:36:28 -0700,
wrote:

wrote in message
...
On Fri, 9 Jul 2010 00:11:14 -0700,
wrote:

You should really get to a good orthopedic guy or neurologist and
get
that knee jerk of yours checked out. Just because Wayne B is out
trolling again doesn't mean that you need to be first on the hook.
You should really find time to invest in a brain. You're a jerk, a
racist,
and a liar.
Well John, she's at the boat, guess you'll have to gaff her now.

Well, you sure aren't sounding like the adult some people thought you
were...

Sorry if I have failed to meet your expectations in some way. Adults
are allowed to have a sense of humor you know, and there is plenty of
humor here in some of these exchanges.

Don't waste your time on "her".


Yeah...you're surely a much easier date.

~~ Snerk ~~
Ditzy Dan trolling for a date with D'Wayne? Which one would be the man
of the house?
Says the rent boy who licks Harry's balls.

Great Artwork - Suitable for framing...
 

In article ,
says...

On 7/15/10 8:42 PM, Larry wrote:
YukonBound wrote:


"Harry" wrote in message
...
In article ,
says...

"Harry" wrote in message
...
In article ,
says...

On 7/8/10 5:13 PM, Wayne.B wrote:
On Thu, 8 Jul 2010 11:50:46 -0700,

wrote:

Yup.. you're a racist.

You should really get to a good orthopedic guy or neurologist
and get
that knee jerk of yours checked out. Just because John is out
trolling again doesn't mean that you need to be first on the hook.


W'hine...netcopper.

Spoofer alert! I certainly wouldn't call anyone a netcop, what
with my
special little buddy Don being the newsgroup typo nazi.

Well, learn proper grammar and how to spell. You'll have no trouble
from
me, Kevin.

WTF is Kevin, little buddy?

Kevin Noble would be you...a 54 year old engineering technician who
works in Tucker Ga.
Do you need your work number...or can you still remember it?
Stalking, Donnie? Is your life that boring? Does it make you feel better
about the fact that you have a dysfunctional family?


Dysfunctional? Going from Dan to Bob to Larry to Larry G, with a few
other handles I've forgotten...now that's dysfunctional.

Or H the K, or Harry?, or HK......

Great Artwork - Suitable for framing...
 

--
"Political correctness is a doctrine, fostered by a delusional, illogical
minority, and rabidly promoted by an unscrupulous mainstream media, which
holds forth the proposition that it is entirely possible to pick up a turd
by the clean end."

"YukonBound" wrote in message
...
In article ,
says...

On 7/15/10 8:42 PM, Larry wrote:
YukonBound wrote:


"Harry" wrote in message
...
In article ,
says...

"Harry" wrote in message
...
In article ,
says...

On 7/8/10 5:13 PM, Wayne.B wrote:
On Thu, 8 Jul 2010 11:50:46 -0700,

wrote:

Yup.. you're a racist.

You should really get to a good orthopedic guy or neurologist
and get
that knee jerk of yours checked out. Just because John is out
trolling again doesn't mean that you need to be first on the
hook.


W'hine...netcopper.

Spoofer alert! I certainly wouldn't call anyone a netcop, what
with my
special little buddy Don being the newsgroup typo nazi.

Well, learn proper grammar and how to spell. You'll have no trouble
from
me, Kevin.

WTF is Kevin, little buddy?

Kevin Noble would be you...a 54 year old engineering technician who
works in Tucker Ga.
Do you need your work number...or can you still remember it?
Stalking, Donnie? Is your life that boring? Does it make you feel
better
about the fact that you have a dysfunctional family?


Dysfunctional? Going from Dan to Bob to Larry to Larry G, with a few
other handles I've forgotten...now that's dysfunctional.

Or H the K, or Harry?, or HK......

Thought you were supposed to be his buddie.

Great Artwork - Suitable for framing...
 

"Harold" wrote in message
...


--
"Political correctness is a doctrine, fostered by a delusional, illogical
minority, and rabidly promoted by an unscrupulous mainstream media, which
holds forth the proposition that it is entirely possible to pick up a turd
by the clean end."

"YukonBound" wrote in message
...
In article ,
says...

On 7/15/10 8:42 PM, Larry wrote:
YukonBound wrote:


"Harry" wrote in message
...
In article ,
says...

"Harry" wrote in message
...
In article ,
says...

On 7/8/10 5:13 PM, Wayne.B wrote:
On Thu, 8 Jul 2010 11:50:46 -0700,

wrote:

Yup.. you're a racist.

You should really get to a good orthopedic guy or neurologist
and get
that knee jerk of yours checked out. Just because John is out
trolling again doesn't mean that you need to be first on the
hook.


W'hine...netcopper.

Spoofer alert! I certainly wouldn't call anyone a netcop, what
with my
special little buddy Don being the newsgroup typo nazi.

Well, learn proper grammar and how to spell. You'll have no trouble
from
me, Kevin.

WTF is Kevin, little buddy?

Kevin Noble would be you...a 54 year old engineering technician who
works in Tucker Ga.
Do you need your work number...or can you still remember it?
Stalking, Donnie? Is your life that boring? Does it make you feel
better
about the fact that you have a dysfunctional family?


Dysfunctional? Going from Dan to Bob to Larry to Larry G, with a few
other handles I've forgotten...now that's dysfunctional.

Or H the K, or Harry?, or HK......

Thought you were supposed to be his buddie.

Kevin doesn't have any buddies....well, maybe The Freak.

Great Artwork - Suitable for framing...
 

In article ,
says...

"Harold" wrote in message
...


--
"Political correctness is a doctrine, fostered by a delusional, illogical
minority, and rabidly promoted by an unscrupulous mainstream media, which
holds forth the proposition that it is entirely possible to pick up a turd
by the clean end."

"YukonBound" wrote in message
...
In article ,
says...

On 7/15/10 8:42 PM, Larry wrote:
YukonBound wrote:


"Harry" wrote in message
...
In article ,
says...

"Harry" wrote in message
...
In article ,
says...

On 7/8/10 5:13 PM, Wayne.B wrote:
On Thu, 8 Jul 2010 11:50:46 -0700,

wrote:

Yup.. you're a racist.

You should really get to a good orthopedic guy or neurologist
and get
that knee jerk of yours checked out. Just because John is out
trolling again doesn't mean that you need to be first on the
hook.


W'hine...netcopper.

Spoofer alert! I certainly wouldn't call anyone a netcop, what
with my
special little buddy Don being the newsgroup typo nazi.

Well, learn proper grammar and how to spell. You'll have no trouble
from
me, Kevin.

WTF is Kevin, little buddy?

Kevin Noble would be you...a 54 year old engineering technician who
works in Tucker Ga.
Do you need your work number...or can you still remember it?
Stalking, Donnie? Is your life that boring? Does it make you feel
better
about the fact that you have a dysfunctional family?


Dysfunctional? Going from Dan to Bob to Larry to Larry G, with a few
other handles I've forgotten...now that's dysfunctional.

Or H the K, or Harry?, or HK......

Thought you were supposed to be his buddie.

Kevin doesn't have any buddies....well, maybe The Freak.

Again, spoofer, I'm Don from Halifax. If you want my address and phone
number to verify, just ask.

Great Artwork - Suitable for framing...
 

"YukonBound" wrote in message
...
In article ,
says...

"Harold" wrote in message
...


--
"Political correctness is a doctrine, fostered by a delusional,
illogical
minority, and rabidly promoted by an unscrupulous mainstream media,
which
holds forth the proposition that it is entirely possible to pick up a
turd
by the clean end."

"YukonBound" wrote in message
...
In article ,
says...

On 7/15/10 8:42 PM, Larry wrote:
YukonBound wrote:


"Harry" wrote in message
...
In article ,
says...

"Harry" wrote in message
...
In article ,
says...

On 7/8/10 5:13 PM, Wayne.B wrote:
On Thu, 8 Jul 2010 11:50:46 -0700,

wrote:

Yup.. you're a racist.

You should really get to a good orthopedic guy or
neurologist
and get
that knee jerk of yours checked out. Just because John is
out
trolling again doesn't mean that you need to be first on
the
hook.


W'hine...netcopper.

Spoofer alert! I certainly wouldn't call anyone a netcop, what
with my
special little buddy Don being the newsgroup typo nazi.

Well, learn proper grammar and how to spell. You'll have no
trouble
from
me, Kevin.

WTF is Kevin, little buddy?

Kevin Noble would be you...a 54 year old engineering technician
who
works in Tucker Ga.
Do you need your work number...or can you still remember it?
Stalking, Donnie? Is your life that boring? Does it make you feel
better
about the fact that you have a dysfunctional family?


Dysfunctional? Going from Dan to Bob to Larry to Larry G, with a few
other handles I've forgotten...now that's dysfunctional.

Or H the K, or Harry?, or HK......

Thought you were supposed to be his buddie.

Kevin doesn't have any buddies....well, maybe The Freak.

Again, spoofer, I'm Don from Halifax. If you want my address and phone
number to verify, just ask.

Verify this, SpooferBoy!

Great Artwork - Suitable for framing...
 

In article ,
says...

"YukonBound" wrote in message
...
In article ,
says...

"Harold" wrote in message
...


--
"Political correctness is a doctrine, fostered by a delusional,
illogical
minority, and rabidly promoted by an unscrupulous mainstream media,
which
holds forth the proposition that it is entirely possible to pick up a
turd
by the clean end."

"YukonBound" wrote in message
...
In article ,
says...

On 7/15/10 8:42 PM, Larry wrote:
YukonBound wrote:


"Harry" wrote in message
...
In article ,
says...

"Harry" wrote in message
...
In article ,
says...

On 7/8/10 5:13 PM, Wayne.B wrote:
On Thu, 8 Jul 2010 11:50:46 -0700,

wrote:

Yup.. you're a racist.

You should really get to a good orthopedic guy or
neurologist
and get
that knee jerk of yours checked out. Just because John is
out
trolling again doesn't mean that you need to be first on
the
hook.


W'hine...netcopper.

Spoofer alert! I certainly wouldn't call anyone a netcop, what
with my
special little buddy Don being the newsgroup typo nazi.

Well, learn proper grammar and how to spell. You'll have no
trouble
from
me, Kevin.

WTF is Kevin, little buddy?

Kevin Noble would be you...a 54 year old engineering technician
who
works in Tucker Ga.
Do you need your work number...or can you still remember it?
Stalking, Donnie? Is your life that boring? Does it make you feel
better
about the fact that you have a dysfunctional family?


Dysfunctional? Going from Dan to Bob to Larry to Larry G, with a few
other handles I've forgotten...now that's dysfunctional.

Or H the K, or Harry?, or HK......

Thought you were supposed to be his buddie.

Kevin doesn't have any buddies....well, maybe The Freak.

Again, spoofer, I'm Don from Halifax. If you want my address and phone
number to verify, just ask.

Verify this, SpooferBoy!

Nice try amateur spoofer. You sound just about as dumb as me, the real
YukonBound.

Great Artwork - Suitable for framing...
 

Harry  wrote:
On 7/15/10 8:42 PM, Larry wrote:
YukonBound wrote:


"Harry" wrote in message
...
In article ,
says...

"Harry" wrote in message
...
In article ,
says...

On 7/8/10 5:13 PM, Wayne.B wrote:
On Thu, 8 Jul 2010 11:50:46 -0700,

wrote:

Yup.. you're a racist.

You should really get to a good orthopedic guy or neurologist
and get
that knee jerk of yours checked out. Just because John is out
trolling again doesn't mean that you need to be first on the
hook.


W'hine...netcopper.

Spoofer alert! I certainly wouldn't call anyone a netcop, what
with my
special little buddy Don being the newsgroup typo nazi.

Well, learn proper grammar and how to spell. You'll have no trouble
from
me, Kevin.

WTF is Kevin, little buddy?

Kevin Noble would be you...a 54 year old engineering technician who
works in Tucker Ga.
Do you need your work number...or can you still remember it?
Stalking, Donnie? Is your life that boring? Does it make you feel better
about the fact that you have a dysfunctional family?


Dysfunctional? Going from Dan to Bob to Larry to Larry G, with a few
other handles I've forgotten...now that's dysfunctional.

Again...I've always been Larry G.