I need to replace the flexible lines leading between the exhaust
manifold ports and the exhaust ports on the boat. IIRC these are
about 6" in diameter or so. Anyone know where I can order this stuff?
Might have to cut it to length.

"bpuharic" wrote in message
...
I need to replace the flexible lines leading between the exhaust
manifold ports and the exhaust ports on the boat. IIRC these are
about 6" in diameter or so. Anyone know where I can order this stuff?
Might have to cut it to length.

Unless it is a diesel, they are most likely 3.5" or 4". Measure the inside
of the hose, or the outside of the manifold outlet. It may say the number
on the outside of the hose. West Marine carries it and you will have to cut
to length, or order it the correct length. Be prepared for sticker shock.
Called exhaust hose.

On Wed, 3 Mar 2010 20:29:31 -0800, "Bill McKee"
wrote:


"bpuharic" wrote in message
.. .
I need to replace the flexible lines leading between the exhaust
manifold ports and the exhaust ports on the boat. IIRC these are
about 6" in diameter or so. Anyone know where I can order this stuff?
Might have to cut it to length.

Unless it is a diesel, they are most likely 3.5" or 4". Measure the inside
of the hose, or the outside of the manifold outlet. It may say the number
on the outside of the hose. West Marine carries it and you will have to cut
to length, or order it the correct length. Be prepared for sticker shock.
Called exhaust hose.

thanks much...yeah, sticker shock is always common with a boat.

On Mar 3, 7:33�pm, bpuharic wrote:
I need to replace the flexible lines leading between the exhaust
manifold ports and the exhaust ports on the boat. �IIRC these are
about 6" in diameter or so. Anyone know where I can order this stuff?
Might have to cut it to length.

If you need help for this stuff than you need to supply some better
info...what motor, I/O or inboard, what hull, what year, FWC or no....
GOOGLE can be your friend. Talk to folks at your marina. Buy a shop
manual, you're gonna need it, trust me on that.
Mike

Mike wrote:
On Mar 3, 7:33�pm, bpuharic wrote:
I need to replace the flexible lines leading between the exhaust
manifold ports and the exhaust ports on the boat. �IIRC these are
about 6" in diameter or so. Anyone know where I can order this stuff?
Might have to cut it to length.

If you need help for this stuff than you need to supply some better
info...what motor, I/O or inboard, what hull, what year, FWC or no....
GOOGLE can be your friend. Talk to folks at your marina. Buy a shop
manual, you're gonna need it, trust me on that.
Mike

It's pretty generic stuff Mike. Most marine exhaust parts houses can
sell you some. It should be sold by the inch, not foot. pricey stuff.