Home |
Search |
Today's Posts |
#18
![]()
posted to rec.boats
|
|||
|
|||
![]()
On Sat, 12 Dec 2009 22:34:39 -0800, Eddie
wrote: On Sat, 12 Dec 2009 23:55:59 -0500, Rob wrote: Eddie wrote: I have a Regal, dry weight around 8,200lbs. It sits on a three-axle trailer, weight approx. 1,500 lbs. I have six so-so tires and will have the boat sitting on a cement pad for the next 6 mo. or so doing some major and minor work on it. I'm thinking that with all that weight on the tires that if they lose air I may have a hard time putting air in them where it sits. I suppose I could call AAA and ask for a truck that has an air compressor. So my question is, could I put a couple of floor jacks to help support the weight of the boat and trailer? I've seen where cars that are stored for a long time have something to remove the weight under the car. Has anyone done this? I'm thinking that I'd need minimum four with each having a 2-ton capacity. I'd have to figure out a way to lift the boat up to slide the jacks under it. Any comments or suggestions appreciated. Eddie It can't hurt to keep then from developing a flat spot. They also sell covers to keep the sun from deteriorating the rubber. I see RV with these frequently. A good floor jack and some stacked 4X4 wood blocks (or jack stands) will do the job. Rob Rob, think there's a floor jack out there that will lift 10k pounds? I know the pros have 'em, but I was thinking of either borrowing from a neighbor, or buying one at Kragen's. Wonder which is cheaper to buy, 4X4 wood or jack stands? As for the tire covers, good idea, I have them for my TT. Online from WalMart. Will get some as soon as I find out the tire size. Thanks! Eddie A regular 2 1/2 ton cheapo floor jack will have no problem lifting a corner. You could even pick up a cheap bottle jack to lift an axle. You just want the weight off the tires. Won't take much. Might be cheaper to rent a jack if you have no other use for it. You just want to lift enough to get a stand under the axle. Better jack and put the stand at the right spot too, or you could do damage. If you have 4'x4's laying around, use them. Good jackstands are better, since they have a smaller footprint and can adjust to an inch or two instead of 4. Likely won't have to lift as high. Personally, I wouldn't worry about the tires getting a flat spot in that short a time. You could pick up a 12v compressor to top them off if they start losing air. I don't like them, but they work. Slow. 20 bucks or so. Easiest path I see. Or a portable air tank you fill up at a gas station if you can't get your car near the trailer to use the 12v compressor. Don't know what you mean by "so-so" tires. To me, tires are either "good" or should be replaced. Not the place to cut corners. --Vic |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Light boat, heavy air | ASA | |||
How long do boat trailer tires typically last? | General | |||
Old tires as boat fenders | ASA | |||
FS: Heavy duty trailer tires on galv wheels in NJ | Marketplace |