LinkBack Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
  #14   Report Post  
basskisser
 
Posts: n/a
Default Dry compression test Ok -wet not so good. Rebuild???

(Steven Shelikoff) wrote in message ...
On 17 Sep 2003 04:44:35 -0700,
(basskisser) wrote:

(Steven Shelikoff) wrote in message ...
On 11 Sep 2003 04:15:23 -0700,
(basskisser) wrote:

"Lawrence James" wrote in message ink.net...
If the compression goes up when you put a little oil in the cylinder it
means the rings are leaking. Too much oil could change the compression some
I suppose. Make sure you crank each cylinder until the gauge stops rising.

According to Shelikoff, and his boy wonder, JoeTechnician, leaking
rings is normal, and acceptable.
Really, they think that all four stroke engines should burn oil,
getting past rings.

I see that you're STILL trying to prove that you're too stupid to
understand the difference between "none", "a little bit" and "too much".


If SOME got by the rings, then how in the world would compression
increase? I'll tell you how. The oil actually makes a better seal than
dry.


Good. At least now you realize that the rings/cylinder interface isn't
dry and has some oil between. Part of that oil layer gets burned during
combustion.

Steve


So, let's see, a wet compression test tells us that the rings are
worn, if the compression comes up from wet to dry. WORN, as in needs
to be rebuilt. Now, if the test stays the same, decent compression wet
or dry, the rings and or cylinder wall are good. So, using your above
analogy, if the rings are getting oil by them, they are bad. If the
ring to cylinder fit is good, the compression doesn't change from wet
to dry. SO, please explain how this could possibly be.
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is Off
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
How to find a good used fiberglass boat? Trace General 6 September 20th 03 12:57 PM
115 hp Evinrude, no compression in one cyl. Clams Canino General 1 August 20th 03 03:42 PM
Good weekend, except for one little cover problem. Calif Bill General 0 July 30th 03 05:18 AM
Odd noise and compression drop Scott Schaus General 7 July 11th 03 06:08 AM


All times are GMT +1. The time now is 06:29 PM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 BoatBanter.com.
The comments are property of their posters.
 

About Us

"It's about Boats"

 

Copyright © 2017