Need a NMEA pinout on a Micrologic Mariner, if anyone has one.

rb wrote:

Need a NMEA pinout on a Micrologic Mariner, if anyone has one.



I have the owners manual for a Micrologic ML-8000 Loran I am still
using. No idea of the similarities. This manual has the rear panel
view, with pin/wire descriptions including NMEA 0183 Serial Data Tx/Rx
wires. There is a short blub on NMEA Autopilot connections and pins,
and then a whole section on NMEA 0183 format specifications such as
"autopilot format, time to go format, velocity, etc. with field 1-x for
each.

No idea if this is helpful or not. Can contact via email, by removing
the on my email address, Stoneman