On Mar 29, 5:55 pm, "WBH" wrote:
"rlojmo" wrote in message

ups.com...
On Mar 29, 4:57 pm, "WBH" wrote:

"rlojmo" wrote in message

oups.com...
On Mar 28, 11:18 pm, "WBH" wrote: "rlojmo"
wrote in message

roups.com...
On Mar 28, 7:13 pm, "WBH" wrote: There is
an

option available for the Brookhouse NMEA multiplexer, that

allows testing of any NMEA data value and user-control of 4 signals
that
can switch a lights (leds), buzzers or relays.
The following is an excerpt from the documentation:

· Testing of NMEA parameter values and setting or clearing of
externally available control signals. The control signals can be used
for
warning lights, alarm buzzers or to drive relays to switch lights or
equipment on/off. There are 4 signals available. NMEA parameter
conditions
that can be tested a (Greater than), (Smaller than) and =
(Equal).

Signals can be turned on or

off if the condition is "true".

The complete document is

hehttp://www.brookhouseonline.com/pdf%...ering%20and%20..





.

If your Raymarine plotter is a C-series or E-series, you may want to
have
a
look at this:http://brookhouseonline.com/pdf%20files/Mux_AIS_C.pdf

Wout

"rlojmo" wrote in message

roups.com...

Does anyone have a commercial solution for getting an alram out of
the
raymaine chartplotters that can actually be heard. I know they sell
the seatlk to nema converter for this purpose, but I am told this
will
not sound an alrm for anchor dragging. I bought the shipmodul
multiplxer but unfortunately this does not have switched outputs. Is
there a nema alarm sentence from the raymarine char plotter?

Bob

How do I access the 4 signals, I thought it only had RS-232 for the
output/

No, Brookhouse mux outputs are RS232, RS422, 2nd RS422 @4800
(speedconversion of AIS-C and AIS models), USB (optional). If the
control
signal option is ordered, a separate 10" multi-core cable is brought out
the
mux enclosure with a led already connected to output 1 for practicing
the
*C
directive. It is intended for the more technically oriented.
You will find more he

http://www.brookhouseonline.com/pdf%...20controlled%2....

Wout

Thanks a lot for the information.

Unfortunately I ordered mine from Captn Jack's, I didn't know about
the signal option. Any chance I could solder those wires on myself?

Bob

Are you sure you have a Brookhouse multiplexer? You started this thread
saying you had a Miniplex.
Wout

What I have is shown at the link below:

http://www.capjack.com/category/Mari...iplexors/Minip...

Bob

That's clearly not a Brookhouse mux.
I've given you the links for Brookhouse.
The standard Brookhouse mux is $149.00
The control signal option is $25.00
If you need BT, a simple 4800bps plug-in module is available for $45.00. For
BT with many configurable options and baudrates, use an AIRCABLE module for
$69.00 (order direct from aircable).
Wout

Sorry I thought it was. Thanks for your help.

Bob

Wout,

I have the Brookstone multiplexer with usb wiring. Is the control signal
option retrofittable?

Ansley Sawyer

"Ansley W. Sawyer" wrote in message
...
| Wout,
|
| I have the Brookstone multiplexer with usb wiring. Is the control signal
| option retrofittable?
|
| Ansley Sawyer
|
Ansley,
If you purchased your multiplexer recently (during the last year), the
answer is yes.
Wout
|