LinkBack Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
  #4   Report Post  
posted to rec.boats.electronics
Ed
 
Posts: n/a
Default depth indication questions

I have a $2000 unit and a $1200 unit on my sportfish with expensive
transducers, etc. They work OK at 20Kts but not over 200ft deep unless
I am going about 8Kts then it will read to 600ft..

I have a cheap humminbird piranha on my 40 kt jet dingy and it will read
to 50 ft plus at 40 kts. It is mounted INSIDE just like the other
poster suggested. I like it so much I bought another one for my little
whaler!!!





Larry wrote:
"Rob L." wrote in
newsQJjg.37697$A8.11468@clgrps12:


I have some questions about depth finders and fish finders. I am
looking at basically just seeing how deep the water is while im at
speed (old 16' volvo penta unit so not extremely fast) pulling skiers
and tubes. Will a fish finder do this reliably or do i need a
dedicated depth finder? I can get a good deal on a piranha max 20 and
was wondering if this unit could do the job. Some have told me that
this unit wouldnt work if I was going at any rate of speed but I
figured I would try here where the experts on this topic seem to be
located. I would also like the use of the fish finder for my
infrequent fishing trips but the depth indication is more what im
looking for in our shallow lakes up here.
Any comments or suggestions of a direction to go is very greatly
appreciated.





I had a Lowrance fish finder depth sounder in a 1997 Sea Rayder F16
jetboat going over 50 mph. At that speed, it could see the bottom in
60' of water from its INSIDE-THE-HULL transducer epoxied to the inside of
the bilge forward of the jet pump intake just offcenter of the keel. The
external transducer dragging in the water under jet power caused the boat
to steer towards the offcenter transducer's drag, making the boat loop
dangerously if it lost power suddenly.

The Lowrance got water in the display once about a year after I installed
it. Lowrance just gave me a new one....great service. Of course, I
bought it new.

Speed doesn't keep them from seeing the bottom....BUBBLES AND NOISE do.
If it's trying to see through the cavitation bubbles under the hull and
mechanical noise from the engine/drive, range drops quite badly. It will
not see through a cored hull like a Boston Whaler, either, because the
core absorbs the sound energy. Solid plastic or that chopper gun crap
they try to pass off as fiberglass these days seems to work well.

Hope this helped you.


 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is Off
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
depth finder losing bottom [email protected] Electronics 3 June 1st 06 06:31 AM
Grant's Tomb Questions... RCE General 1 February 23rd 06 01:31 AM
Grant's Tomb Questions... William Bruce General 0 February 23rd 06 12:29 AM
Grant's Tomb Questions... JimH General 0 February 22nd 06 10:36 PM
Grant's Tomb Questions... Doug Kanter General 1 February 22nd 06 06:23 PM


All times are GMT +1. The time now is 04:57 AM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 BoatBanter.com.
The comments are property of their posters.
 

About Us

"It's about Boats"

 

Copyright © 2017