On 12 Jun 2006 15:32:00 -0700, "Terry K" wrote:

Of course, if you have only one antenna, to be used for a navigation
and other reciever and for a transmitter on the same band, you would
not want tx power sent to the rx.

The presence of a tx key line in the cable is a dead givaway. When the
tx is keyed, the loran is disconnected by a sharing relay.

This is old tech, right?

Terry K

Since Loran-C operates on 100 KHz, it is highly unlikely that the
antenna would be shared with any transmitter.




--
Peter Bennett, VE7CEI
peterbb4 (at) interchange.ubc.ca
new newsgroup users info : http://vancouver-webpages.com/nnq
GPS and NMEA info: http://vancouver-webpages.com/peter
Vancouver Power Squadron: http://vancouver.powersquadron.ca