Home |
Search |
Today's Posts |
#7
posted to rec.boats.electronics
|
|||
|
|||
antenna coupler question
On 12 Jun 2006 15:32:00 -0700, "Terry K" wrote:
Of course, if you have only one antenna, to be used for a navigation and other reciever and for a transmitter on the same band, you would not want tx power sent to the rx. The presence of a tx key line in the cable is a dead givaway. When the tx is keyed, the loran is disconnected by a sharing relay. This is old tech, right? Terry K Since Loran-C operates on 100 KHz, it is highly unlikely that the antenna would be shared with any transmitter. -- Peter Bennett, VE7CEI peterbb4 (at) interchange.ubc.ca new newsgroup users info : http://vancouver-webpages.com/nnq GPS and NMEA info: http://vancouver-webpages.com/peter Vancouver Power Squadron: http://vancouver.powersquadron.ca |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
loran antenna coupler question | Electronics | |||
help with loran coupler needed | Electronics | |||
loran antenna coupler question | Electronics | |||
universal loran ant coupler unit question | Electronics |