Home |
Search |
Today's Posts |
#6
![]() |
|||
|
|||
![]()
c) But, as I am receiving NMEA from the depth sounder, could I mix
this info with the NMEA from my VHF radio in the COM1 to receive the "Position Reports", assuming that my new radio has NMEA in/out? You can not simply "mix" the outputs of two NMEA talkers - you need to use an NMEA multiplexer to combine them. how much do these things cost? I found one once and it was about USD 500 ![]() |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Problem Solved: Map 276C AP NMEA Interface | Electronics | |||
Problem Solved: Map 276C AP NMEA Interface | Cruising | |||
Garmin 276C Question | General | |||
GpsMap 276C NMEA Interface Problem | Electronics | |||
FS: Garmin GPSMAP 176C GPS Package | Electronics |