Home |
Search |
Today's Posts |
|
#1
![]() |
|||
|
|||
![]()
Jsp wrote:
My Furuno GPS can be connected to a PC by a serial cable. The wiring diagram can be viewed on the GPS itself. But: my laptop doesn't have a serial port. Is there a way to make a USB-cable instead? (And to have some chartplotting program recognize this)? What you need is called a serial to USB adapter or converter. You can find them at places like CompUSA, Fryes, Circuit City, Best Buy, Staples, etc. The ones made by Belkin seem to be widely acceptable, I have never found a serial input (including a number of GPS NMEA inputs) that would not work with the one I have. It is a short (10" or so) cable with a USB plug on one end and a small housing with a DB9P connector (looks just like your missing serial port socket) on the other. The Belkin I have (model F5U109) also has three LEDs (RX, TX, LINK) to indicate status of the serial connection and traffic flow. If you are into shopping around for one, try eBay. There are hundreds of them for sale there every day. A search for "serial usb" will turn up a bunch. Jack -- Jack Erbes in Ellsworth, Maine, USA - jackerbes at adelphia dot net (also receiving email at jacker at midmaine.com) |
#2
![]() |
|||
|
|||
![]()
What you need is called a serial to USB adapter or converter.
I got mine at the Radio Shack........ Leanne |
#3
![]() |
|||
|
|||
![]()
Leanne wrote:
What you need is called a serial to USB adapter or converter. I got mine at the Radio Shack........ Leanne Thanks all. I'll try out your suggestions. As I am Dutch, I'll look for equivalents of the shops and site over here. Jsp |
#4
![]() |
|||
|
|||
![]()
Check out www.keyspan.com
"Jsp" wrote in message ... Leanne wrote: What you need is called a serial to USB adapter or converter. I got mine at the Radio Shack........ Leanne Thanks all. I'll try out your suggestions. As I am Dutch, I'll look for equivalents of the shops and site over here. Jsp |
#5
![]() |
|||
|
|||
![]()
Doug Dotson wrote:
Check out www.keyspan.com "Jsp" wrote in message ... Leanne wrote: What you need is called a serial to USB adapter or converter. That's exactly what I need. It never even occured to me that a thing like this exists. I saw one on the site mentioned above that provides one RS232 serial interface. So I presume this also makes the OS and the chartplotting program "think" the computer now has a COM-port, which is needed for the setup of the connection with the GPS? Thanks again. Jsp |
#6
![]() |
|||
|
|||
![]()
Jsp wrote:
Doug Dotson wrote: Check out www.keyspan.com "Jsp" wrote in message ... Leanne wrote: What you need is called a serial to USB adapter or converter. That's exactly what I need. It never even occured to me that a thing like this exists. I saw one on the site mentioned above that provides one RS232 serial interface. So I presume this also makes the OS and the chartplotting program "think" the computer now has a COM-port, which is needed for the setup of the connection with the GPS? Thanks again. Jsp They come with driver software and have to be installed, only takes a few minutes. Make sure the one you buy is compatible with your operating system (WinXP, ME, 98 etc.) Ebay usually has loads of them. The converter is USB to serial, NOT serial to USB as mentioned above! -- Digital Photo-charts fo all UK areas. Remove 'nospam' to reply. |
#7
![]() |
|||
|
|||
![]() "Dennis Pogson" wrote in message ... Jsp wrote: Doug Dotson wrote: Check out www.keyspan.com "Jsp" wrote in message ... Leanne wrote: What you need is called a serial to USB adapter or converter. That's exactly what I need. It never even occured to me that a thing like this exists. I saw one on the site mentioned above that provides one RS232 serial interface. So I presume this also makes the OS and the chartplotting program "think" the computer now has a COM-port, which is needed for the setup of the connection with the GPS? Thanks again. Jsp They come with driver software and have to be installed, only takes a few minutes. Make sure the one you buy is compatible with your operating system (WinXP, ME, 98 etc.) Ebay usually has loads of them. The converter is USB to serial, NOT serial to USB as mentioned above! Depends upon your point of view. -- Digital Photo-charts fo all UK areas. Remove 'nospam' to reply. |
#8
![]() |
|||
|
|||
![]()
On Sat, 07 May 2005 11:31:37 GMT, "Dennis Pogson"
wrote: They come with driver software and have to be installed, only takes a few minutes. Make sure the one you buy is compatible with your operating system (WinXP, ME, 98 etc.) Ebay usually has loads of them. The converter is USB to serial, NOT serial to USB as mentioned above! I would consider these converters to be USB-serial (that is, they convert both ways.) -- Peter Bennett, VE7CEI peterbb4 (at) interchange.ubc.ca new newsgroup users info : http://vancouver-webpages.com/nnq GPS and NMEA info: http://vancouver-webpages.com/peter Vancouver Power Squadron: http://vancouver.powersquadron.ca |
#9
![]() |
|||
|
|||
![]()
Jsp wrote:
I saw one on the site mentioned above that provides one RS232 serial interface. So I presume this also makes the OS and the chartplotting program "think" the computer now has a COM-port, which is needed for the setup of the connection with the GPS? A Windows OS will Plug & Play the serial to USB adapter. You may need to provide a driver the first time, that is normally supplied on a CD with the adapter. If you need to know the COM port number, you can then find that listed in the Device Manager under COM and LPT ports. The port will usually be identified with the adapter or maybe the IC that does the A/D conversion. Jack -- Jack Erbes in Ellsworth, Maine, USA - jackerbes at adelphia dot net (also receiving email at jacker at midmaine.com) |
#10
![]() |
|||
|
|||
![]()
On Sat, 07 May 2005 07:57:54 -0400, Jack Erbes
wrote: If you need to know the COM port number, you can then find that listed in the Device Manager under COM and LPT ports. The port will usually be identified with the adapter or maybe the IC that does the A/D conversion. Jack On my computer, the USB/serial adaptor will appear as a different COM port, depending on which of the three USB ports it is plugged into. -- Peter Bennett, VE7CEI peterbb4 (at) interchange.ubc.ca new newsgroup users info : http://vancouver-webpages.com/nnq GPS and NMEA info: http://vancouver-webpages.com/peter Vancouver Power Squadron: http://vancouver.powersquadron.ca |
Reply |
|
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
how to connect notebook on a 12V DC | Electronics | |||
how2 connect a "day" fuel tank to engine ? | Cruising | |||
Before you connect new NMEA and blow your network.... | Cruising | |||
Before you connect new NMEA and blow your network.... | Electronics | |||
Ignorant Dupes | ASA |