LinkBack Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
  #5   Report Post  
Klaus
 
Posts: n/a
Default Circuit for strobe (UK)



Dennis Pogson wrote:


I have an old 12 volt strobe from RS Components, the electrical supplies
company and the ref. no. is 565-440. It happens to be orange, but I would
think the glass is interchangeable.

Try http://rswww.com/

Remove "nospam" from return address.


I used this 12V strobe from RS. Took the flash tube out and mounted it inside
the clear anchor light so that it did not obstruct the light bulb already in
there.
The electronics from the strobe were re housed in a PVC tube with end caps and
the lot was fitted just under the anchor light inside the mast. 3 wires led
down from this, common , anchor light , strobe. Since there would never be both
lights on a single common wire was sufficient and a 3 core mains cable could be
used to run inside the mast.
Klaus



 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is Off
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Mercruiser Alpha 1 - 3.0 Liter Starter Circuit Problem rmoxtenn General 1 June 13th 04 04:36 PM
Need help with electronics circuit Norm Freedman Cruising 14 March 3rd 04 06:52 PM
Apelco Fishfinder/Plotter 530 - Circuit Diagram Greg Electronics 0 November 29th 03 09:45 AM
AC/DC Circuit Breakers Larry Cruising 0 July 31st 03 01:20 AM


All times are GMT +1. The time now is 06:45 AM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 BoatBanter.com.
The comments are property of their posters.
 

About Us

"It's about Boats"

 

Copyright © 2017