I have an ICOM VHF, model IC-M502, new this past spring, and two
weekends ago, I noticed it was not transmitting properly.

I was "rafting up" with a friend in his boat, and while we were
negotiating the boat hookup, I tried to stay in touch with the VHF. He
could not hear anything at all when I transmitted at the one watt
setting, but could hear me with some signal breakup at the 25 watt
setting. We tried several channels; same results.

It's not the antenna or its fitting, as far as we can tell, because we
hooked up a spare VHF and it did fine.

The friend believes there may be some problem in the M502's mike. My VHF
radio electronics knowledge is minimal. I am going to send the radio
back to ICOM for a look-see and repairs, but I'd like a better
indication from the experts here as to what might be the problem.

Any ideas?

Thanks!



--
Email sent to is never read, unless it is in
response to an issue that interests me.