Home |
Search |
Today's Posts |
|
#1
|
|||
|
|||
NMEA mutiplexer
hello
there a company called marine electronic supplies (MES) and i think there in southampton, but i moght be wrong. they do a box called an nema splitter, feed a gps in and you can get anywhere from 2 to lots and lots of outputs, think they start around £200, regards Meindert Sprang wrote: "Gabriel Latrémouille" wrote in message . cable.rogers.com... Has anyone connected several NMEA devices together? Here is what I am planning. GPS NMEA output to 1-PC-serial port for navigation software 2-radar to display next waypoint on radar multiple NMEA capable instruments to - PC for display within navigation software Any comments suggestions appreciated You can do that with our multiplexers. You can connect up to four instruments (outputs) to four inputs on the multiplexer. The RS-232 or USB output from the multiplexer feeds the combined NMEA data to your computer. At the same time, the combined NMEA data is available on two NMEA outputs on the multiplexer, one of which can be connected to your radar. Meindert www.shipmodul.com |
#2
|
|||
|
|||
NMEA mutiplexer
"Birdog" wrote in message
... hello there a company called marine electronic supplies (MES) and i think there in southampton, but i moght be wrong. they do a box called an nema splitter, feed a gps in and you can get anywhere from 2 to lots and lots of outputs, think they start around £200, But you cannot use a splitter to combine the outputs of different instruments together to one. That can only be achived by a multiplexer. Meindert |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Before you connect new NMEA and blow your network.... | Cruising | |||
Before you connect new NMEA and blow your network.... | Electronics | |||
NMEA Noise in SSB | Electronics | |||
Transmitting different versions of NMEA data | Electronics | |||
[ANN] NMEA data over IP networks, freeware program | Electronics |