Home |
Search |
Today's Posts |
#1
|
|||
|
|||
Pump RUNNING Indication
I want to be able to tell when my potable water pump is operating. With my
old pump, I simply put a remote light in series with the B+ supply to the pump. The new variable speed pump does not lend itself to this...I need to sense current, not voltage. I have researched magnetic reed switches but even a relatively large reed switch requires 70 to 80 ampere-turns to cycle. The new pump draws about 3 to 4 amps so there would be lots of turns around the reed switch. Any ideas? Thanks- Charlie |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Anyone know how an oil pump draws a prime? | Cruising | |||
March Pump Question | Cruising | |||
Problem water pump Yanmar 2GM *Redux* | Cruising | |||
Bilge Pump Switch | Cruising |