Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
Dick Locke
 
Posts: n/a
Default 230 V transfer switch?


I'm looking for a 230v 50 amp double pole transfer switch so I can
switch my boat between 115v 30 amp and 230v 50 amp shore power. Any
ideas for a small one? There's a switch on the boat already that
switches between the 230v generator and 230v shore power but I can't
spot the manufacturer's name...

In case you're curious, I brought a Florida boat to SF bay where 230 v
marinas are scarce. It has a 230v ac refrigerator which I do need to
run at the dock and some aircons that I don't need here. My thought is
to put a 4kva 115230 volt transformer on board, and remember not to
try to run aircons from the 115 shore power. The marina could rewire
for a fee but if I do it on board it costs about the same and I can
take it with me.
  #2   Report Post  
Graham Stephen
 
Posts: n/a
Default 230 V transfer switch?

Warning: I am in Europe and have managed to cook various US sourced items
by subjecting them to
twice the voltage that they expected. It required no thought to achieve!
Pride damaged more that the pocket!

Graham


"Dick Locke" wrote in message
...

I'm looking for a 230v 50 amp double pole transfer switch so I can
switch my boat between 115v 30 amp and 230v 50 amp shore power. Any
ideas for a small one? There's a switch on the boat already that
switches between the 230v generator and 230v shore power but I can't
spot the manufacturer's name...

In case you're curious, I brought a Florida boat to SF bay where 230 v
marinas are scarce. It has a 230v ac refrigerator which I do need to
run at the dock and some aircons that I don't need here. My thought is
to put a 4kva 115230 volt transformer on board, and remember not to
try to run aircons from the 115 shore power. The marina could rewire
for a fee but if I do it on board it costs about the same and I can
take it with me.



  #3   Report Post  
Dick Locke
 
Posts: n/a
Default 230 V transfer switch?

On Thu, 10 Jul 2003 19:21:07 +0100, "Graham Stephen"
wrote:

Warning: I am in Europe and have managed to cook various US sourced items
by subjecting them to
twice the voltage that they expected. It required no thought to achieve!
Pride damaged more that the pocket!

Graham


I have that in mind, if not under control. The boat was originally
owned by a European living in Hong Kong and then Ireland, so it has
220 volt outlets and appliances throughout. The first American to own
it put in a small stepdown transformer and 115 v outlets and
unfortunately a 115 v Heart for battery charging.

Now, being a Tayana, I found additional American-style 115 outlets
buried in the cabnetry that are actually wired to 12v dc...go figure.
  #4   Report Post  
Vito
 
Posts: n/a
Default 230 V transfer switch?

Dick Locke wrote:

"Graham Stephen wrote:

Warning: I am in Europe and have managed to cook various US sourced items...


I have that in mind, if not under control. The boat was originally
owned by a European living in Hong Kong and then Ireland, so it has
220 volt outlets and appliances throughout. The first American to own
it put in a small stepdown transformer and 115 v outlets and
unfortunately a 115 v Heart for battery charging.

Now, being a Tayana, I found additional American-style 115 outlets
buried in the cabnetry that are actually wired to 12v dc...go figure.


It could be worse. I dunno about marinas but in U.S. RVs and many
campgrounds the "50 Amp" service is NOT really 220 volts, but simply two
110V circuits using 220V plugs and jacks to handle the current.
Typically one of these circuits runs the #2 air conditioner and the
other one the rest of the "house". Thus it doesnt matter if the shore
jack is really 220, or simply the same 110 in parallel, cuz the RV's two
110v-to-neutral circuits are not connected in any way except sharing a
common neutral lead. However, in your application ..???

If your boat really uses 220, vs two seperate 110v circuits, I'd verify
each shorepower jack before hooking up to it.

Meanwhile I'll watch for smoke on the horizon (c:

Howard
Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is Off
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
78 Merc 200: How to wire mercury kill switch?? John Davison General 4 June 18th 04 12:39 AM
Shift cable and kill switch adjusting Ree-Yees General 12 June 1st 04 04:41 PM
Bilge pump switch - again L. M. Rappaport Cruising 3 October 30th 03 08:12 PM
Bilge Pump Switch Ron Thornton Boat Building 3 October 28th 03 12:42 AM
"Neutral safety switch" location gatt General 1 July 16th 03 04:39 AM


All times are GMT +1. The time now is 04:45 AM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 BoatBanter.com.
The comments are property of their posters.
 

About Us

"It's about Boats"

 

Copyright © 2017