Home |
Search |
Today's Posts |
|
#1
![]()
posted to rec.boats.cruising
|
|||
|
|||
![]()
On 2008-08-20 16:30:25 -0400, " said:
On Aug 12, 12:01 pm, "Roger Long" wrote: "Edgar" wrote Why do you think you need to do more? Because I've seen the mess when a sail has come unrolled at the dock and also on a mooring. I depend on the wraps normally but put a sail tie on for heavy weather or when leaving the boat for a long period. ... A sister "ship" (boat) of ours was lost when the upper section of jib unfurled and caused them to drag anchor. That sounds like a different problem, which I've also seen: The sail not being furled tightly enough and a squall coming through. Their clew was still tightly wrapped/kept, but the sail unfurled like a sardine can. I take the jib off when I'm not going to go sailing for a couple of days. It lasts a lot longer and would have to crawl back on deck and get itself out of its bag to do any harm. I don't understand why folks leave the jibs bent on when they are away from the boat or expecting heavy weather. For me, the convenience of being able to have the sail out and drawing 15 minutes after we've entered the parking lot outweighs the expense of once-a-decade sacrificial cloth. -- Jere Lull Xan-à-Deux -- Tanzer 28 #4 out of Tolchester, MD Xan's pages: http://web.mac.com/jerelull/iWeb/Xan/ Our BVI trips & tips: http://homepage.mac.com/jerelull/BVI/ |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Furler Systems | ASA | |||
Q: Where do I secure the jib line? | General | |||
CDI Furler expereince | Cruising | |||
Headsail for Furler? | ASA | |||
wtb used furler | Electronics |