| Home |
| Search |
| Today's Posts |
|
#20
posted to rec.boats.cruising
|
|||
|
|||
|
On Tue, 12 Aug 2008 16:58:36 -0700, in message
lutions "Capt. JG" wrote: "Dave" wrote in message .. . On Tue, 12 Aug 2008 12:02:14 -0700, "Capt. JG" said: Well, basically, if the line should come off the cleat, then the sail will unfurl and flog itself to death. I generally cleat off both sheets fairly tight. Then as Roger says, if I'm expecting a storm or will be gone for a long time I'll add a separate tie around the sail. I do, but not around the winch. You need to keep in mind that the fairly hefty sheets are in opposition to a fairly light furling line, so I wouldn't over tighten. I cleat the furling line, then tension the sheets around the winch by hand. Using a winch handle could overstress things, but hand tight on a winch is the same as hand tight to a cleat. I don't think I have any line on board that I could overload by hand. Ryk |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Furler Systems | ASA | |||
| Q: Where do I secure the jib line? | General | |||
| CDI Furler expereince | Cruising | |||
| Headsail for Furler? | ASA | |||
| wtb used furler | Electronics | |||