| Home |
| Search |
| Today's Posts |
|
|
|
#1
|
|||
|
|||
where to tap into Hot water YANMAR 18HP?
If you can break into the cooling loop ' between' the engine and the
exhaust manifold - on some engines this is not possible but on some the connection is by a small rubber hose. Otherwise the next best place is just before the injection port to the water lift muffler. |
|
#2
|
|||
|
|||
|
where to tap into Hot water YANMAR 18HP?
on a fresh water cooled engine?
rick On Wed, 31 Mar 2004 03:31:51 GMT, Rich Hampel wrote: If you can break into the cooling loop ' between' the engine and the exhaust manifold - on some engines this is not possible but on some the connection is by a small rubber hose. Otherwise the next best place is just before the injection port to the water lift muffler. |
|
#3
|
|||
|
|||
|
where to tap into Hot water YANMAR 18HP?
on a fresh water cooled engine?
rick On Wed, 31 Mar 2004 03:31:51 GMT, Rich Hampel wrote: If you can break into the cooling loop ' between' the engine and the exhaust manifold - on some engines this is not possible but on some the connection is by a small rubber hose. Otherwise the next best place is just before the injection port to the water lift muffler. |
| Reply |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Problem water pump Yanmar 2GM *Redux* | Cruising | |||
| Yanmar 3GM raw water cooled? | Cruising | |||
| Where to find ramp stories? | General | |||
| Hot Water Dispenser | Cruising | |||
Hybrid Mode
