Meindert Sprang wrote:


What I have been wondering about is this: why is the text wide and
fixed? I agree with you that large pictures and drawings *need* to be
that large. But simple text, should in my opinion 'flow' between the
margings of the column.

I took a look at the code of your site and found that you define the
columns to fixed sizes. This is ok for a menu but a nuisance for the
body text. I have a similar setup, but only the menu column has a
fixed width. The width attribute for the body text is omitted and
therefore the text flows nice in whatever screen witdh it is viewed
on.

Just a suggestion for easier reading.... ;-)

I'm not exactly sure how to do that. I use NetObjects Fusion because it
is a lot more powerful than most web page editors and fairly easy to use
but I have not really tried to get into it very far. It is hard enough
to find time to write up the text much less try to learn more tricks.

--
Glenn Ashmore

I'm building a 45' cutter in strip/composite. Watch my progress (or lack
there of) at: http://www.rutuonline.com
Shameless Commercial Division: http://www.spade-anchor-us.com

"Glenn Ashmore" wrote in message
news:h5EMb.814$Mb7.456@lakeread04...

I'm not exactly sure how to do that. I use NetObjects Fusion because it
is a lot more powerful than most web page editors and fairly easy to use
but I have not really tried to get into it very far. It is hard enough
to find time to write up the text much less try to learn more tricks.

Mmm, don't know that software. I'm on the other side of the spectrum, using
Arachnophilia. Meaning I'm writing the html 'barefooted' with the occasional
help of a buttont that spits out an empty table or other html structure. I
even fiddled around with 'home-brew' style sheets....
Too much of an engineer, I guess.... ;-)

Meindert

"Glenn Ashmore" wrote in message
news:h5EMb.814$Mb7.456@lakeread04...

I'm not exactly sure how to do that. I use NetObjects Fusion because it
is a lot more powerful than most web page editors and fairly easy to use
but I have not really tried to get into it very far. It is hard enough
to find time to write up the text much less try to learn more tricks.

Mmm, don't know that software. I'm on the other side of the spectrum, using
Arachnophilia. Meaning I'm writing the html 'barefooted' with the occasional
help of a buttont that spits out an empty table or other html structure. I
even fiddled around with 'home-brew' style sheets....
Too much of an engineer, I guess.... ;-)

Meindert