LinkBack Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
  #8   Report Post  
posted to rec.boats.electronics,rec.boats.cruising
external usenet poster
 
First recorded activity by BoatBanter: Jun 2007
Posts: 28
Default AIS hardware and software

Meindert Sprang wrote:
"Dick Locke" wrote in message
...
There seem to be two price points..single channel, serial only for
about $190 from Milltech or dual channel USB capable from Safe Passage
for around $800. I'm thinking single channel is adequate but I my sole
serial port is occupied by the GPS and I've had problems in the past
with the serial/usb adapters. Anyone know of a single channel USB
output receiver?


You could use a MiniPlex-Lite, a small NMEA multiplexer with a USB interface
and one high speed input for your AIS receiver next to two normal NMEA
inputs (GPS, etc). And it comes without the typical problems found with
serial/usb adapters. This box simply works.

Meindert
www.shipmodul.com


Meindert,

No flame intended, really! What are the typical problems with USB hubs?
Thanks!
--

Larry
rapp at lmr dot com
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is Off
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
I am fixing up a Saroca 15' and all the hardware for the boom and mast are rusted. Any ideas on how to get the best deal on hardware. I am also new to sailing and setting up a sailboat. Can anyone suggest a place to get information on hardware set-up miketraceyhan General 2 October 7th 09 02:09 AM
Formsys Maxsurf v11, other Naval Architecture Software, Marine Architecture Software, ship design software, boat building, Maxsurf Pro 9.52 (and Addons), Autoship 8.xx (and Addons), Proteus.Engineering.FastShip.v­6.1.25, HYDROSOFT NAVCAD 4.23.0061, S code_fu2 ASA 1 February 5th 06 02:22 PM
Formsys Maxsurf v11, other Naval Architecture Software, Marine Architecture Software, ship design software, boat building, Maxsurf Pro 9.52 (and Addons), Autoship 8.xx (and Addons), Proteus.Engineering.FastShip.v­6.1.25, HYDROSOFT NAVCAD 4.23.0061, S [email protected] Tall Ships 0 February 4th 06 08:41 AM
Formsys Maxsurf v11, other Naval Architecture Software, Marine Architecture Software, ship design software, boat building, Maxsurf Pro 9.52 (and Addons), Autoship 8.xx (and Addons), Proteus.Engineering.FastShip.v­6.1.25, HYDROSOFT NAVCAD 4.23.0061, S [email protected] Boat Building 0 January 13th 06 11:01 PM


All times are GMT +1. The time now is 03:58 PM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 BoatBanter.com.
The comments are property of their posters.
 

About Us

"It's about Boats"

 

Copyright © 2017