Home |
Search |
Today's Posts |
#6
posted to rec.boats.cruising
|
|||
|
|||
Stainless Steel "rust" marks on paint
"Peter Hendra" wrote in message ... On Sat, 24 Mar 2007 12:44:13 GMT, Rich Hampel wrote: Probability is that the welds are not ground flat and smooth and crevice corrosion is underway in the 'intersticies' of the weldment (poor weld technique ... not a full penetration weld). To be 'corrosion resistant' (chlorides, etc. attack stainless) all the weld must be flat /smooth by grinding and then polishing/buffing to a high mechanical mirror polish. Any 'weld-lap' or pin-hole in the weld will be a source of 'rust' .... gotta be closed and then smoothed. . This has just made sense as only one of the bolt on "feet" for the ladder suffers from the problem. I'll try it. Thanks very much to all who responded. regards Peter Hendra A friend has gone thru this with his stainless. People at his workplace that know about his sort of thing told him he needed to passivate the welds. They gave him some solution to paint on the welds. I believe this is hydrofluoric acid, perhaps a mixture with other acids. Requires very carefull application. It took away the surface shine. Don't recall the final result but I can ask him. |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Ping:... Joe | ASA | |||
ughh,.. how do you cut stainless steel plate? | Boat Building | |||
Stainless steel props | General | |||
FS: Stainless Steel Manufacturing in South Africa | Marketplace | |||
FS: Stainless Steel Manufacturing in South Africa | Marketplace |