Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
posted to rec.boats.cruising
DSK DSK is offline
external usenet poster
 
First recorded activity by BoatBanter: Jul 2006
Posts: 1,419
Default Headsail size

Gordon wrote:

So I'm going to a roller furler jib for cruising.


A good choice I think, assuming you can afford a good one
and proper installation.

... What size would be best?
120, 135,150, etc!
Gordon


What size(s) do you normally carry?


Evan Gatehouse2 wrote:
It depends on your cruising area, and the times of year you sail.

I'd say the default answer is a 135 but for Chesapeake Bay or LI Sound
in summer cruising, a 150. For San Francisco Bay, 115 or 120...

For offshore cruising, I'd lean towards 135 but without knowing more
about your boat or plans, nobody can offer much advice



Right on... I like Phil Bolger's discussion along the same
lines, wherein he's asked how big a headsail some boat
should have, and he then asks how hard the wind is going to
blow.


Ryk wrote:
Since the numbers are calculated as LP/J*100, it also depends a lot on
the rig design, ranging from small foretriangle fractional rigs to
older masthead boats with a huge J dimension and a short boom. A 135
is a small sail on the former and a great big sail on the latter.


Good point. The Yankee 30 is a masthead, with large but not
extreme J dimension. I'd lean toward a larger genoa for
normal sailing and a staysail for the heavy days.


My
boat fits into the latter category and I would probably choose about
110 for cruising comfort and ease of tacking, then hoist a spinnaker
off the wind if it isn't blowing.

Go see your sailmaker for advice based on local conditions, type of
boat, and the kind of sailing you want to do. It's usually free...


A good sail inventory is a basic necessity, and I don't mean
large numbers of blown-out racing sails. It's amazing to me
how many people are cruising with crap sails. But then,
diesel fuel is still relatively cheap....

A cruising spinnaker, a 120 or 135 (depending on where & how
most sailing is to be done, I might even go to a 145 but
then I like to go fast) on a roller, and a staysail, would
be a good set-up.

Fresh BReezes- Doug King

  #2   Report Post  
posted to rec.boats.cruising
Ryk Ryk is offline
external usenet poster
 
First recorded activity by BoatBanter: Jul 2006
Posts: 142
Default Headsail size

On Sun, 26 Nov 2006 09:16:07 -0500, in message

DSK wrote:

Ryk wrote:
Since the numbers are calculated as LP/J*100, it also depends a lot on
the rig design, ranging from small foretriangle fractional rigs to
older masthead boats with a huge J dimension and a short boom. A 135
is a small sail on the former and a great big sail on the latter.


Good point. The Yankee 30 is a masthead, with large but not
extreme J dimension. I'd lean toward a larger genoa for
normal sailing and a staysail for the heavy days.


My
boat fits into the latter category and I would probably choose about
110 for cruising comfort and ease of tacking, then hoist a spinnaker
off the wind if it isn't blowing.

Go see your sailmaker for advice based on local conditions, type of
boat, and the kind of sailing you want to do. It's usually free...


A good sail inventory is a basic necessity, and I don't mean
large numbers of blown-out racing sails. It's amazing to me
how many people are cruising with crap sails. But then,
diesel fuel is still relatively cheap....


Depends on the local racing fleet... Non-competitive racing sails may
still have years of performance cruising capacity left in them. Still,
I agree that cruising with bad sails is not fun for me.

A cruising spinnaker, a 120 or 135 (depending on where & how
most sailing is to be done, I might even go to a 145 but
then I like to go fast) on a roller, and a staysail, would
be a good set-up.


I carry a good inventory, but sail changes tend not to happen a lot
when cruising, and then not until far after they should. Unrolling a
big genoa and getting it down on the deck can be nasty work if left
too late while the wind is rising. Most cruisers around here seem to
hoist sail at the start of the season and leave it on the furler until
the fall.

It's great to fly my mylar 150 until the wind gets up over 7 knots,
but I would never keep it on the furler. If I wanted a general purpose
cruising sail I would go smaller than my standard 135 that I use club
racing.

Again, it's hard to generalize over different rigs and venues

Ryk

  #3   Report Post  
posted to rec.boats.cruising
DSK DSK is offline
external usenet poster
 
First recorded activity by BoatBanter: Jul 2006
Posts: 1,419
Default Headsail size

A good sail inventory is a basic necessity, and I don't mean
large numbers of blown-out racing sails. It's amazing to me
how many people are cruising with crap sails. But then,
diesel fuel is still relatively cheap....



Ryk wrote:
Depends on the local racing fleet... Non-competitive racing sails may
still have years of performance cruising capacity left in them. Still,
I agree that cruising with bad sails is not fun for me.


Depends on what you mean by "non-competitive." A lot of
racers are flogging their way around the course with crap
sails, too. By "crap" I mean a sail that is blown into a
baggy shape that will not respond to tuning, that has had
the seams stressed & cloth weakened such that it is at risk
of coming apart in a hard blow.

A sail with a full season on it is not competitive but
should be fine for good sailing (cruising or otherwise). A
sail with two full season on it will need to be recut to be
competitive and restitched to be any good for anything else.

I don't see cruising as all that different from racing, in
terms of demand on the sails & rig. In fact, when cruising,
one is likely to leave sails up longer and in slightly
stronger wind since one is likely to be shorthanded. Of
course, the racer's daily bending on, all that tacking, and
taking them off & folding them, is also hard on the sails.

One of the problems with hi-tech racing sails is that they
don't really lose much shape, they get unresponsive to
tuning adjustments (which you can live with) and weakened
(which is a problem). The sail will have a nice shape and
just look a bit tired, and suddenly disappears in a gust.



A cruising spinnaker, a 120 or 135 (depending on where & how
most sailing is to be done, I might even go to a 145 but
then I like to go fast) on a roller, and a staysail, would
be a good set-up.



I carry a good inventory, but sail changes tend not to happen a lot
when cruising, and then not until far after they should. Unrolling a
big genoa and getting it down on the deck can be nasty work if left
too late while the wind is rising. Most cruisers around here seem to
hoist sail at the start of the season and leave it on the furler until
the fall.


Same around here. A big light air genoa is nice to have but
taking it on & off is a PITA, so is stowing it... you don't
even want it on the boat the rest of the time. That's one
reason why I thought a 145 (for areas with lots of light
air, smaller for areas where the wind is more dependable)
with one of the reefing options would be good, with a
staysail for when it really blows. The staysail would be
easier to set, easier to stow.


It's great to fly my mylar 150 until the wind gets up over 7 knots,
but I would never keep it on the furler. If I wanted a general purpose
cruising sail I would go smaller than my standard 135 that I use club
racing.

Again, it's hard to generalize over different rigs and venues


And different tastes.

One thing I'd like in a cruising and "fun sailing" genoa is
one that allows somewhat better visibility. A high-cut foot
is deadly to a racer but desirable for any other type of
sailing.

Diesel fuel is still relatively cheap. Of the cruisers I
know, 99% of them motor 99% of the time when they are trying
to actually get somewhere. Crap sails is one reason for
that, but then you can buy a lot of fuel for the price of a
set of good sails.

DSK

  #4   Report Post  
posted to rec.boats.cruising
Ryk Ryk is offline
external usenet poster
 
First recorded activity by BoatBanter: Jul 2006
Posts: 142
Default Headsail size

On Mon, 27 Nov 2006 08:19:42 -0500, in message

DSK wrote:

Diesel fuel is still relatively cheap. Of the cruisers I
know, 99% of them motor 99% of the time when they are trying
to actually get somewhere. Crap sails is one reason for
that, but then you can buy a lot of fuel for the price of a
set of good sails.


Yes, my total expenditure on fuel since I bought the boat comes
nowhere near the price of a single sail.

Ryk

  #5   Report Post  
posted to rec.boats.cruising
external usenet poster
 
First recorded activity by BoatBanter: Oct 2006
Posts: 126
Default Headsail size

Ryk wrote:
On Mon, 27 Nov 2006 08:19:42 -0500, in message

DSK wrote:


Diesel fuel is still relatively cheap. Of the cruisers I
know, 99% of them motor 99% of the time when they are trying
to actually get somewhere. Crap sails is one reason for
that, but then you can buy a lot of fuel for the price of a
set of good sails.



Yes, my total expenditure on fuel since I bought the boat comes
nowhere near the price of a single sail.

Ryk

I filled the tank in July and have burned off half of it already.
It's a 3 gllon tank.

RL


  #6   Report Post  
posted to rec.boats.cruising
external usenet poster
 
First recorded activity by BoatBanter: Jul 2006
Posts: 10,492
Default Headsail size

On Tue, 28 Nov 2006 23:26:38 GMT, cavelamb himself
wrote:

I filled the tank in July and have burned off half of it already.
It's a 3 gllon tank.


You clearly need to buy a power boat in order to keep your fuel
freshened up. With good selection you could burn the whole 3 gallons
in a single mile.

Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is Off
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
what size shunt do I need? chuck Electronics 0 August 14th 06 01:58 AM
Yamaha 250 Prop Nut Size GARLAND HANSON General 1 June 30th 05 01:59 AM
Headsail size? Stephen Trapani Cruising 6 May 7th 04 03:32 AM
Searay Prop Size Joseph Friess Cruising 2 August 12th 03 01:09 AM
Ignorant Dupes jlrogers ASA 109 August 11th 03 11:16 AM


All times are GMT +1. The time now is 08:56 PM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 BoatBanter.com.
The comments are property of their posters.
 

About Us

"It's about Boats"

 

Copyright © 2017