Home |
Search |
Today's Posts |
#1
![]()
posted to rec.boats.cruising
|
|||
|
|||
![]()
As a multihull owner interested in saving weight wherever possible I'd
appreciate hearing any insight, opinion, ideas or experience anyone has with this. The one concern I've heard from someone who had Kevlar shrouds and stays on his racing boat's mast was that it was far easier to cut those lines, resulting in catastrophic loss. I'm not sure how easily Kevlar cuts, but I would think it is somewhat easier than steel wire. The concern I'd have for using them as lifelines (as voiced by Gary) is more about the possibility that the lines might UV degrade, making the unnoticibly weaker. Given that I intend to couple my life lines with netting, and also use jack lines and harness when out of the cockpit, I think this minimizes the issue, but it is worth consideration. Robb Roger Long wrote: I've heard or seen something somewhere about using some of the new super low stretch rope for lifelines. Has anyone heard about that idea? Gary wrote: I have seen many different parts of a boats rigging being replaced with new high modulus ropes. The multihull world is embracing rope because of the weight savings. They are certainly strong enough and look good but the are a couple issues that warrant thought. First of all is the UV degredation. It is much greater in any rope than in wire and requires more frequent replacement. The second thing is nicks. Wire will stand some abuse but a nicked rope will be much weaker. I have seen a couple boat lose their rigs because of nicks in rope backstays. Finally the splices in the new ropes are much more challenging and many require special splices to ensure the strength isn't lost. It is doable but think about pros and cons first. Gary |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
LF: Source for replacement handles sophus berendsen rope clutch handles | General | |||
LF: Source for replacement handles sophus berendsen rope clutch handles | ASA |