Home |
Search |
Today's Posts |
#1
posted to rec.boats.cruising
|
|||
|
|||
No water to engine!
I have an 88 Merc 7.4 / bravo1 which I recently changed all hoses
thermostat housing and thermostat. I also rebuilt Jabsco raw water pump. I started engine on muffs and didnt see water from exhaust and shut down immediately. I removed intake hose from transome and ran water directly into hose, started engine and everything was fine. Good exhaust and temps. I left hose off and put muffs back on but nothing came thru transom. I also tried to run water from bilge to outdrive and only a trickle came out of drive. Is there something that can get clogged in outdrive? Trying to troubleshoot without removing bell housing. All was ok before being winterized. Mechanic only informed that impeller was worn. |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
rec.boats.paddle sea kayaking FAQ | General | |||
rec.boats.paddle sea kayaking FAQ | General | |||
rec.boats.paddle sea kayaking FAQ | General | |||
Siphons, anti-siphons & wet exhausts | ASA | |||
power vs sail | Cruising |