Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #11   Report Post  
posted to rec.boats.cruising
Don White
 
Posts: n/a
Default RIB's. experiences? advice?

Glenn A. Heslop wrote:
I simply swim up 'bout 2/3 of the way forward, grab the side, pull myself up
and roll head first into the bottom of the boat. The flexible sides give
way and mean you don't have to heave yourself up as far as it would seem.
The boat is real stable.

Glenn.
s/v Seawing
www.seawing.net



Are the sides or transom solid enough to use one of the cheap, 4 step
aluminum, hook type boarding ladders?
  #12   Report Post  
posted to rec.boats.cruising
Richard J Kinch
 
Posts: n/a
Default RIB's. experiences? advice?

Len writes:

Anyone here with long-term experience?


I would suggest the sub-$1000 Korean PVC inflatables if you can take a hard
floor instead of RIB. For the money you can just replace the thing
(reusing the engine/etc) when it gets old. After a year of using one on
salt water I'm still convinced that they're the equal of the low-end
Mercury or Zodiacs they're cloning.
  #13   Report Post  
posted to rec.boats.cruising
Gordon
 
Posts: n/a
Default RIB's. experiences? advice?

http://www.buyinflatableboats.net/

$850 includes shipping and 5 year warranty
G


"Richard J Kinch" wrote in message
. ..
Len writes:

Anyone here with long-term experience?


I would suggest the sub-$1000 Korean PVC inflatables if you can take a

hard
floor instead of RIB. For the money you can just replace the thing
(reusing the engine/etc) when it gets old. After a year of using one on
salt water I'm still convinced that they're the equal of the low-end
Mercury or Zodiacs they're cloning.



Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is Off
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Woodstrip canoe advice Alex Boat Building 5 March 20th 06 02:41 AM
Boat Float experiences Jack General 2 March 2nd 06 08:08 PM
need advice on purchasing a used trawler cap208 Cruising 2 February 21st 06 05:38 AM
Advice on obtaining a workspace for building David Manthey Boat Building 4 January 31st 06 05:24 AM
can I use pine for steambended ribs? [email protected] Boat Building 9 January 13th 06 11:37 AM


All times are GMT +1. The time now is 12:40 AM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 BoatBanter.com.
The comments are property of their posters.
 

About Us

"It's about Boats"

 

Copyright © 2017