That was my problem. I am trying to splice 1/4" Samson Amsteel Blue and all
they say is "two fid lengths". I use Brion Toss's snare type splicing
wands which work with any braid up to 1" using only two sizes as long as you
know the bury length. The NE Ropes Uni-Fid is also only two sizes so you
need to know the actual bury length there too.

42 diameters is about the same as single braid Technora. Now I wonder why
Samson recommends a simple stitched tuck for Amsteel rather than a locked
Brummel which would be a lot more stable.

--
Glenn Ashmore

I'm building a 45' cutter in strip/composite. Watch my progress (or lack
there of) at: http://www.rutuonline.com
Shameless Commercial Division: http://www.spade-anchor-us.com

"Garland Gray II" wrote in message
news:asqPf.2524$3k1.2369@dukeread03...
That's not much help, as I'm guessing Glen doesn't have a proper size fid.
I certainly don't as there are better tools for splicing.
According to my worksheet using information from Samson, a fid length is
21 times the rope diameter.

"Rich" wrote in message
...
The length of a "fid length" varies according to the diameter of the
line being spliced. If you have the proper sized fid for the line yo
wish to spice, the fid itself is the fid length.