OK, so today my brother and his boat and I with mine (loaded full of
kids) head for Forbes lake which is about 28 mi. from me.

Nice day, moderate temp and good water. i jsut had the head reworked
on my 140 mercruiser, and previously had some stuff done to the lower
end , so far I've had about 750.00 worth of work done to my little
Chris Craft Scorpion 169. More than I wanted to spen on repairs but you
gotta go boating, right?

So after cruising around and rolling through some wakes and having
about 40 minutes worth of fun, the kids were thinking mutiny if I
didn't break out the tube.

So.... we aired it up, hooked on the line, and threw my daugher in, and
away we went.

doing turnes etc, and doing what you do tubing, I'm running about 3200
rpm, and then with no warning. BANG! engine runs away. I pulled back on
the throttle and went to neutral, I looked at my kid brother and he
looks at me, and the typical "What happened?"

beats me. engine runs fine, but no forward motion on the stick. No
gear noise, but also.....the throttle won't move into reverse position.


Stuck in the lake.

So.... My other brother pulls up with his boat, and we're trying to
figure it out, as if we could do anything for it, and then in disgust.
hooked up a line and he towed us to shore.

Kids dissapointed because the boat quit,a nd no more fun. But the good
part is that with Aunts, Uncles, and cousins around, Tehy headed for
the small swim beach, to hang out.

I loaded up, and headed for home, with that "sinking feeling" bloating
in my gut.

I get home, and with engine off, I put the throttle into forward
position, and spinning the prop backwards, I get the typical rachet.
props not bound or tight , but spinning in the correct manner, theres
this awful, gritty feeling witht he sound of eating oyster shells with
false teeth! (More sinking feeling rebloating in my gut). I suppose
it heads for the marina next week for $ome repair$ that $imply mu$t be
made.

Don't know how deep the $urgery, nor how expen$ive, but the weekend
isn't going to good for me or my family at the moment.

Well, I at least saved some money by switching to Geico.....

Tim

Tim wrote:
Nice day, moderate temp and good water. i jsut had the head reworked
on my 140 mercruiser, and previously had some stuff done to the lower
end , so far I've had about 750.00 worth of work done to my little
Chris Craft Scorpion 169. More than I wanted to spen on repairs but you
gotta go boating, right?

Ahoy TheSaying to remember/ponder="He who would go to sea for
pleasure would go to hell for a pastime."
Lord Chesterton (I think it was, read it somewhere and it
seemed SO appropriate.)

Ciao,
LEnfantduVent

yeah, but if you'd stayed at a Holiday Inn Express you would have known what
was wrong...........

"Tim" wrote in message
oups.com...
OK, so today my brother and his boat and I with mine (loaded full of
kids) head for Forbes lake which is about 28 mi. from me.

Nice day, moderate temp and good water. i jsut had the head reworked
on my 140 mercruiser, and previously had some stuff done to the lower
end , so far I've had about 750.00 worth of work done to my little
Chris Craft Scorpion 169. More than I wanted to spen on repairs but you
gotta go boating, right?

So after cruising around and rolling through some wakes and having
about 40 minutes worth of fun, the kids were thinking mutiny if I
didn't break out the tube.

So.... we aired it up, hooked on the line, and threw my daugher in, and
away we went.

doing turnes etc, and doing what you do tubing, I'm running about 3200
rpm, and then with no warning. BANG! engine runs away. I pulled back on
the throttle and went to neutral, I looked at my kid brother and he
looks at me, and the typical "What happened?"

beats me. engine runs fine, but no forward motion on the stick. No
gear noise, but also.....the throttle won't move into reverse position.


Stuck in the lake.

So.... My other brother pulls up with his boat, and we're trying to
figure it out, as if we could do anything for it, and then in disgust.
hooked up a line and he towed us to shore.

Kids dissapointed because the boat quit,a nd no more fun. But the good
part is that with Aunts, Uncles, and cousins around, Tehy headed for
the small swim beach, to hang out.

I loaded up, and headed for home, with that "sinking feeling" bloating
in my gut.

I get home, and with engine off, I put the throttle into forward
position, and spinning the prop backwards, I get the typical rachet.
props not bound or tight , but spinning in the correct manner, theres
this awful, gritty feeling witht he sound of eating oyster shells with
false teeth! (More sinking feeling rebloating in my gut). I suppose
it heads for the marina next week for $ome repair$ that $imply mu$t be
made.

Don't know how deep the $urgery, nor how expen$ive, but the weekend
isn't going to good for me or my family at the moment.

Well, I at least saved some money by switching to Geico.....

Tim

"Tim" wrote in message
oups.com...
OK, so today my brother and his boat and I with mine (loaded full of
kids) head for Forbes lake which is about 28 mi. from me.

Nice day, moderate temp and good water. i jsut had the head reworked
on my 140 mercruiser, and previously had some stuff done to the lower
end , so far I've had about 750.00 worth of work done to my little
Chris Craft Scorpion 169. More than I wanted to spen on repairs but you
gotta go boating, right?

So after cruising around and rolling through some wakes and having
about 40 minutes worth of fun, the kids were thinking mutiny if I
didn't break out the tube.

So.... we aired it up, hooked on the line, and threw my daugher in, and
away we went.

doing turnes etc, and doing what you do tubing, I'm running about 3200
rpm, and then with no warning. BANG! engine runs away. I pulled back on
the throttle and went to neutral, I looked at my kid brother and he
looks at me, and the typical "What happened?"

beats me. engine runs fine, but no forward motion on the stick. No
gear noise, but also.....the throttle won't move into reverse position.


Stuck in the lake.

So.... My other brother pulls up with his boat, and we're trying to
figure it out, as if we could do anything for it, and then in disgust.
hooked up a line and he towed us to shore.

Kids dissapointed because the boat quit,a nd no more fun. But the good
part is that with Aunts, Uncles, and cousins around, Tehy headed for
the small swim beach, to hang out.

I loaded up, and headed for home, with that "sinking feeling" bloating
in my gut.

I get home, and with engine off, I put the throttle into forward
position, and spinning the prop backwards, I get the typical rachet.
props not bound or tight , but spinning in the correct manner, theres
this awful, gritty feeling witht he sound of eating oyster shells with
false teeth! (More sinking feeling rebloating in my gut). I suppose
it heads for the marina next week for $ome repair$ that $imply mu$t be
made.

Don't know how deep the $urgery, nor how expen$ive, but the weekend
isn't going to good for me or my family at the moment.

Well, I at least saved some money by switching to Geico.....

Tim


Souds like you crunched some gears, but there is the slim possibility that
they didn't get he linkages adjusted right when they put it back together
last time. You did say you just had some "lower end work done.


--
Bob La Londe
http://www.YumaBassMan.com

You did say you just had some "lower end work done.


Yes I did Bob, with maybe 5 hr.s running time max. Tue, it goes backt
o the guyt hat worked on it. I've dealt with the public long enough
that if I gave him a "piece of my mind", I'd only be giving him a
"chunk of my lip" . And I do know that stuff can blow even though it
looked good.

I'm obviously no boat mechanic, but hope that's what it is, instead of
crunching metal to powder.

LOL! Nothing like starting a holiday weekend off with a ...bang! Well,
maybe I'll have it for Labor Day....


Tim

On 3 Jul 2005 19:23:37 -0700, "Tim" wrote:

You did say you just had some "lower end work done.


Yes I did Bob, with maybe 5 hr.s running time max. Tue, it goes backt
o the guyt hat worked on it. I've dealt with the public long enough
that if I gave him a "piece of my mind", I'd only be giving him a
"chunk of my lip" . And I do know that stuff can blow even though it
looked good.

I'm obviously no boat mechanic, but hope that's what it is, instead of
crunching metal to powder.

LOL! Nothing like starting a holiday weekend off with a ...bang! Well,
maybe I'll have it for Labor Day....


Tim

In any case, your mechanic should be able to give you a reasonable
explanation of what went wrong. If not, find another mechanic.
Norm B

I really like the local mechanic. He's old enough that he probably laid
the steam fittings for Noah's ark. and has run a boat shop for over 30
years. He'll should be able to give a good explaination. Earlier this
spring, he replaced the water pump and a bunch of seals. Hind sight is
never wrong. If I hade known then...I would have asked him for a total
tear down. But you know how it is. "If it works (especially,at the
time) Don't fix it..."

Well, I took it to the boat doctor and he said I probably hit
something. I told him that it just seemed to "let loose" and he agreed.
but looking at scuff marks on the stainless prop, he said the the lower
end missed everything but the prop hit. y'know, the un stoppable object
hits the un movable object and "CLACK" busted gears. He asked me if I
wanted an "estimate" for insurance purposes, and I said it really
didn't matter, because I only have liability on it.....

Oh well, nothing that money can't cure.....

Tim


Tim

Tim wrote:

Well, I at least saved some money by switching to Geico.....

See how blessed you are? I took it in the shorts twice by switching to
Geico.

wrote in message
ups.com...
Tim wrote:

Well, I at least saved some money by switching to Geico.....

See how blessed you are? I took it in the shorts twice by switching to
Geico.


Had a bad experience with Geico. You couldn't pay me enough to switch to
them.