Use a hole saw to make a wood plug slightly smaller than your existing
hole. Tack it into place with hot melt glue and then cut your new hole
with the appropriate hole saw using the center hole in the plug as your
starting guide. Go easy at first until the track for the new hole is
well established.

Clever!

wrote:

Use a hole saw to make a wood plug slightly smaller than your existing
hole. Tack it into place with hot melt glue and then cut your new hole
with the appropriate hole saw using the center hole in the plug as your
starting guide. Go easy at first until the track for the new hole is
well established.

Necessity is the mother of clever...

:-)

Here's a rather nifty tool made especially for the purpose, it's billed
as the "Oops" hole saw arbor:

http://www.rockler.com/findit.cfm?co...760&page=11383

wrote:
Necessity is the mother of clever...

:-)

"Keith Hughes" wrote in message
...
Here's a rather nifty tool made especially for the purpose, it's billed as
the "Oops" hole saw arbor:

http://www.rockler.com/findit.cfm?co...760&page=11383


Nice.


--
Bob La Londe
http://www.YumaBassMan.com

Exactly what Engsol described.
"Keith Hughes" wrote in message
...
Here's a rather nifty tool made especially for the purpose, it's billed as
the "Oops" hole saw arbor:

http://www.rockler.com/findit.cfm?co...760&page=11383

wrote:
Necessity is the mother of clever...

:-)