Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
J. K. Smith
 
Posts: n/a
Default small outboard motor question

I would like opinions from you boat wizards familiar with Zen and outboards.

My Nissan 3.5 drives my small Portaboat around nicely but its user
manual and the label on the fuel tank disagree. The manual tells me to
use 25:1 fuelil ratio and the label says 50:1. I've been running 25:1
because it's what I saw first. I don't notice significant smoke and
haven't had it long enough to foul the plug yet.

Any ideas on which way is best or whether this is even a subject worth
discussing? Thanks.
  #2   Report Post  
Don White
 
Posts: n/a
Default

J. K. Smith wrote:
snip..
My Nissan 3.5 drives my small Portaboat around nicely but its user
manual and the label on the fuel tank disagree. The manual tells me to
use 25:1 fuelil ratio and the label says 50:1. I've been running 25:1
because it's what I saw first. I don't notice significant smoke and
haven't had it long enough to foul the plug yet.

Any ideas on which way is best or whether this is even a subject worth
discussing? Thanks.


My 1986 Evinrude Yachtwin manual says I can use 100:1 but the dealer
told me a service notice came out a year later advising 50:1. I'd stay
with the 25:1 until you talk to a reliable dealer.
  #3   Report Post  
Robert or Karen Swarts
 
Posts: n/a
Default

I don't claim to know the direct answer to your question, but I can tell you
that I have been using 50:1 on ALL my two stroke engines ever since the oils
designed specifically for that mixture became available. Some of those
engines called for 25:1, but seem to run just fine on the 50:1, and for
quite a few years now. I would not use 50:1 unless the oil is specifically
designed for it.

BS

"J. K. Smith" wrote in message
...
I would like opinions from you boat wizards familiar with Zen and
outboards.

My Nissan 3.5 drives my small Portaboat around nicely but its user manual
and the label on the fuel tank disagree. The manual tells me to use 25:1
fuelil ratio and the label says 50:1. I've been running 25:1 because
it's what I saw first. I don't notice significant smoke and haven't had it
long enough to foul the plug yet.

Any ideas on which way is best or whether this is even a subject worth
discussing? Thanks.



  #5   Report Post  
Jeff Rigby
 
Posts: n/a
Default


"J. K. Smith" wrote in message
...
I would like opinions from you boat wizards familiar with Zen and
outboards.

My Nissan 3.5 drives my small Portaboat around nicely but its user manual
and the label on the fuel tank disagree. The manual tells me to use 25:1
fuelil ratio and the label says 50:1. I've been running 25:1 because
it's what I saw first. I don't notice significant smoke and haven't had it
long enough to foul the plug yet.

Any ideas on which way is best or whether this is even a subject worth
discussing? Thanks.


I would guess that during breakin 25-1 and using the new TCW3 oil after
breakin (not so new now) 50-1.




Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is Off
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
OT Bush hatred basskisser General 210 February 16th 04 02:46 PM
small outboard on canoe Walt Boat Building 12 January 29th 04 11:29 PM
Habbi's gearcase full of water K Smith General 9 December 26th 03 11:48 AM
Recommend HP + mounting outboard - 27' Sailboat? Dave W Boat Building 3 October 1st 03 01:54 AM


All times are GMT +1. The time now is 07:50 AM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 BoatBanter.com.
The comments are property of their posters.
 

About Us

"It's about Boats"

 

Copyright © 2017