Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
posted to rec.boats.cruising
Bob Bob is offline
external usenet poster
 
First recorded activity by BoatBanter: Jul 2006
Posts: 1,300
Default Shifting sands

On Jul 29, 5:39*am, "Flying Pig" wrote:
Hi, Bruce, and other readers worldwide (I wonder how many there actually are
besides the anonymous knee-jerk Neal-bashers, "Wilbur", Cavelamb, you and a
couple of others - even "Bob" hasn't fired a shot in a while, and Roger's
off cruising - a quickie "here I am" response would shed some light on the
question...),



HOpe youre having fun Skip....... two comments.

one, 60 grt on stainless??? Im assuming your grinding welds and not
attempting to polish rust.. wtf?!?! Damn you must have some serious
corrsion ie ****ty grade SS.

two, there are a ton of other woods out there you can get here in the
usa that will work/last as good as teak. try Pacific Yew Wood or maybe
Black Locust. In the PNW they are lopping 100 year old trees down
because the Black Locus boring Beattle is munching them. Loads of logs
availible for the taking.

Old growth doug fir is excelelnt. Ya worried about warping??? have a
doormaker make a custom solid lam door with a quarter inch veener
black walnut.... jsut because its a boat dont mean its anything
fancier than a land mansion......

hell the house I have now has 130 year old doug fir ballon framing
held togehter with square nails..... zero rot. the grain is as tight
as the pages on an unabridged dictionary.... 1000 year old trees make
good boat building wood. Yes you can still get it easily at a fair
price. just gota know where to look.

SKip P L E A S E ....... ! The Pig aint nothin fancy.... its a ****ing
boat!

I hope this finds you well its been sometimes since I had a chance to
say helloo. See you on the water

Bob
  #2   Report Post  
posted to rec.boats.cruising
external usenet poster
 
First recorded activity by BoatBanter: Mar 2009
Posts: 782
Default Shifting sands

Hi, Bob,

"Bob" wrote in message
...

HOpe youre having fun Skip....... two comments.

one, 60 grt on stainless??? Im assuming your grinding welds and not
attempting to polish rust.. wtf?!?! Damn you must have some serious
corrsion ie ****ty grade SS.

********
Sorry, I miswrote. Start with 80, and work down (well, up). No rust - cut
all that off -just leftovers from barely brushed mill finish which is now
brilliant
*********

two, there are a ton of other woods out there you can get here in the
usa that will work/last as good as teak. try Pacific Yew Wood or maybe
Black Locust. In the PNW they are lopping 100 year old trees down
because the Black Locus boring Beattle is munching them. Loads of logs
availible for the taking.

*********
Hm. How would I get it here on the east coast?
*********

Old growth doug fir is excelelnt. Ya worried about warping??? have a
doormaker make a custom solid lam door with a quarter inch veener
black walnut.... jsut because its a boat dont mean its anything
fancier than a land mansion......

hell the house I have now has 130 year old doug fir ballon framing
held togehter with square nails..... zero rot. the grain is as tight
as the pages on an unabridged dictionary.... 1000 year old trees make
good boat building wood. Yes you can still get it easily at a fair
price. just gota know where to look.

************
Heh. The house I grew up in will be 100 years old in a couple of years.
The 2x were just that, full dimension, and made from yellow pine.

In 62, when there was some remodeling, the contractors broke blade after
blade trying to cut the stuff. Aged yellow pine is about like iron.

So, I'm not surprised. Getting that aged (or original growth) wood is a bit
challenging...
*************

SKip P L E A S E ....... ! The Pig aint nothin fancy.... its a ****ing
boat!

**********
The Flying Pig is talented, but not THAT talented!
**********

I hope this finds you well its been sometimes since I had a chance to
say helloo. See you on the water

Bob

********
Yes, we are well, if hot. Seen in the moved thread, the refrigeration is
going well, as is the taping for the new boot stripe and reveal line (used a
laser to keep it straight, a vast improvement over our eyeball of 4 years
ago).

See you on the water if you ever get to this side of the world!

L8R

Skip


--
Morgan 461 #2
SV Flying Pig KI4MPC
See our galleries at www.justpickone.org/skip/gallery !
Follow us at http://groups.yahoo.com/group/TheFlyingPigLog
and/or http://groups.google.com/group/flyingpiglog

"Believe me, my young friend, there is *nothing*-absolutely nothing-half so
much worth doing as simply messing, messing-about-in-boats; messing about in
boats-or *with* boats.

In or out of 'em, it doesn't matter. Nothing seems really to matter, that's
the charm of it.

Whether you get away, or whether you don't; whether you arrive at your
destination or whether you reach somewhere else, or whether you never get
anywhere at all, you're always busy, and you never do anything in
particular; and when you've done it there's always something else to do, and
you can do it if you like, but you'd much better not."


Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is Off
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Dirty Oil Sands | Indiana: BP can dump more pollution into Lake Michigan LilAbner[_3_] General 0 July 9th 11 06:46 PM
O.T. Momentum shifting? RGrew176 General 19 October 18th 04 06:18 AM
Shifting Baselines Simple Simon ASA 5 October 10th 03 12:31 AM
Transmission shifting David Meade General 1 September 19th 03 12:06 PM
Sands NH_/\)_ ASA 3 August 24th 03 04:11 AM


All times are GMT +1. The time now is 07:00 AM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 BoatBanter.com.
The comments are property of their posters.
 

About Us

"It's about Boats"

 

Copyright © 2017