Home |
Search |
Today's Posts |
#2
![]() |
|||
|
|||
![]() TSailor wrote: I zapped my two water tanks with 4 oz of chlorine bleach per 5 gallons of water capacity per Peggie's book on odors and had a result I can't explain. Hopefully someone can. Since I bought my sailboat in 1996 I have had a problem with the pressure water pump kicking in every couple of minutes. An air leak in the pump will cause it to lose pressure and cycle...it's often a sign that the diaphragm and/or pressure valve in the pump is failing. After treating the tanks, AND the water heater, the pump did not kick in for several hours, not until after the heater was turned on. After the water was hot the pump kicked in every hour +/-. The presence of a leak is obvious, but why would it get better after cleaning the system? Cleaning out the system may have gotten rid of something that was causing the pump to lose pressure quicker. The pump shouldn't cycle at all, though...so I suspect it will do so at increasingly shorter intervals and longer each time till it finally runs continuously without pumping any water. -- Peggie ---------- Peggie Hall Specializing in marine sanitation since 1987 Author "Get Rid of Boat Odors - A Guide To Marine Sanitation Systems and Other Sources of Aggravation and Odor" http://69.20.93.241/store/customer/p...40&cat=&page=1 |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Fresh Water System Cleaning and Maintenance | Cruising | |||
Yanmar 2GM Overheating | Cruising | |||
Fresh-water flushing a raw water system? | Cruising | |||
Where to find ramp stories? | General | |||
inventing a different kind of fresh water engine flush | Boat Building |