Home |
Search |
Today's Posts |
#1
![]() |
|||
|
|||
![]()
Thunderstorms every day and my fear of lightning (totally justified)
have caused me to once again scheme up a way to protect my sailboat. For protection while anchored, I have a 2'X2' copper sheet with very thick stranded tinned cable with a clamp for attachment to the mast. I have considered using this while underway but it would cause too much drag and would probably foul the prop. So........another useless idea. How could you tow a lightning ground? Such a ground doesnt have to be a sheet. it just has to have large surface area. Could attach it to the bottom of the dinghy and tow it with proper cable going to the mast but I try not to tow my dinghy. OK, why not something like a boogie board (foam) covered with Cu foil. No matter which side it had in the water, it would have lots of area submerged. It would produce minimal drag. Any thoughts? |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Can I use Solid wire for rewiring sailboat if not WHY? | Boat Building | |||
Can I use Solid wire for rewiring sailboat if not WHY? | Cruising | |||
Notes on short SSB antennas, for Larry | Cruising | |||
Lightning ground | Cruising |